Motor Guide Still Sucks

[Bob La Londe]

As I mentioned in another post I took the Waco out today for its maiden
voayge.

Amoung the various things I tested was the trolling motor. I pulled the
Motor Gunk off the Baker a while back and put on a new Minn Kota Maxxum. I
love the Maxxum. Anyway, I had the Motor Gunk repaired figuring to either
sell it, or use it on another boat. It had all new parts installed. I
dropped it in the water and after moving back and forth a couple times I
noticed the pointer was not pointing in the right direction, and except at
the absolute slowest speeds the darn thing was flopping back and forth worse
than the tail of a dog with a mouth full of bacon.

As I pulled it out of the water I could hear parts rattling in the motor
head. ****! Motor Gunk has found its way to my, "I ain't gonna risk a dime
on 'em list." If Motor Gunk wants to send me a free new motor I might try
it and give them a second chance, but otherwise forget it.

Fortunately, since nobody had expressed any interest in buying the Skeeter I
had already decided to start pulling stuff off of it for the Whacko. It
took me about ten minutes to pull that old reliable Evinrude trolling motor
off. Sometime tommorrow I am sure I'll have it mounted on the Whacko, and
ready for a test run. While I was at it I pulled both fish finders off he
Skeeter as well in order to use them on the Whacko. I already mounted my
Garmin 176 GPS map, so I will definitely be ready for that ABA aluminum
series coming up.

--
Public Fishing Forums
Fishing Link Index
www.YumaBassMan.com

webmaster
at
YumaBsssMan
dot
com

[Bob La Londe]

I found a good use for my MotorGunk.

I used the power cord off of it to lengthen the power cord on ym Evinrude
trolling motor.

Maybe I can scrounge some other good parts.

--
Public Fishing Forums
Fishing Link Index
www.YumaBassMan.com

webmaster
at
YumaBsssMan
dot
com
"Bob La Londe" > wrote in message
...
> As I mentioned in another post I took the Waco out today for its maiden
> voayge.
>
> Amoung the various things I tested was the trolling motor. I pulled the
> Motor Gunk off the Baker a while back and put on a new Minn Kota Maxxum.
I
> love the Maxxum. Anyway, I had the Motor Gunk repaired figuring to either
> sell it, or use it on another boat. It had all new parts installed. I
> dropped it in the water and after moving back and forth a couple times I
> noticed the pointer was not pointing in the right direction, and except at
> the absolute slowest speeds the darn thing was flopping back and forth
worse
> than the tail of a dog with a mouth full of bacon.
>
> As I pulled it out of the water I could hear parts rattling in the motor
> head. ****! Motor Gunk has found its way to my, "I ain't gonna risk a
dime
> on 'em list." If Motor Gunk wants to send me a free new motor I might try
> it and give them a second chance, but otherwise forget it.
>
> Fortunately, since nobody had expressed any interest in buying the Skeeter
I
> had already decided to start pulling stuff off of it for the Whacko. It
> took me about ten minutes to pull that old reliable Evinrude trolling
motor
> off. Sometime tommorrow I am sure I'll have it mounted on the Whacko, and
> ready for a test run. While I was at it I pulled both fish finders off he
> Skeeter as well in order to use them on the Whacko. I already mounted my
> Garmin 176 GPS map, so I will definitely be ready for that ABA aluminum
> series coming up.
>
> --
> Public Fishing Forums
> Fishing Link Index
> www.YumaBassMan.com
>
> webmaster
> at
> YumaBsssMan
> dot
> com
>
>

[go-bassn]

Bob, how old is your MG? I'm told that since they've been digitizing the
components things have taken a major change for the better, a year or so
ago.

Warren
--
http://www.warrenwolk.com/



"Bob La Londe" > wrote in message
...
> I found a good use for my MotorGunk.
>
> I used the power cord off of it to lengthen the power cord on ym Evinrude
> trolling motor.
>
> Maybe I can scrounge some other good parts.
>
> --
> Public Fishing Forums
> Fishing Link Index
> www.YumaBassMan.com
>
> webmaster
> at
> YumaBsssMan
> dot
> com
> "Bob La Londe" > wrote in message
> ...
> > As I mentioned in another post I took the Waco out today for its maiden
> > voayge.
> >
> > Amoung the various things I tested was the trolling motor. I pulled the
> > Motor Gunk off the Baker a while back and put on a new Minn Kota Maxxum.
> I
> > love the Maxxum. Anyway, I had the Motor Gunk repaired figuring to
either
> > sell it, or use it on another boat. It had all new parts installed. I
> > dropped it in the water and after moving back and forth a couple times I
> > noticed the pointer was not pointing in the right direction, and except
at
> > the absolute slowest speeds the darn thing was flopping back and forth
> worse
> > than the tail of a dog with a mouth full of bacon.
> >
> > As I pulled it out of the water I could hear parts rattling in the motor
> > head. ****! Motor Gunk has found its way to my, "I ain't gonna risk a
> dime
> > on 'em list." If Motor Gunk wants to send me a free new motor I might
try
> > it and give them a second chance, but otherwise forget it.
> >
> > Fortunately, since nobody had expressed any interest in buying the
Skeeter
> I
> > had already decided to start pulling stuff off of it for the Whacko. It
> > took me about ten minutes to pull that old reliable Evinrude trolling
> motor
> > off. Sometime tommorrow I am sure I'll have it mounted on the Whacko,
and
> > ready for a test run. While I was at it I pulled both fish finders off
he
> > Skeeter as well in order to use them on the Whacko. I already mounted
my
> > Garmin 176 GPS map, so I will definitely be ready for that ABA aluminum
> > series coming up.
> >
> > --
> > Public Fishing Forums
> > Fishing Link Index
> > www.YumaBassMan.com
> >
> > webmaster
> > at
> > YumaBsssMan
> > dot
> > com
> >
> >
>
>

[Bob La Londe]

I'm guessing its a 1994 or newer. Its not the electronics part that sucks.
Its the steering mechanism.

I may take a look at converting it to a hand operated as a project for fun
some time to use on my square back canoe for running the lower river, but it
will never go back on one of my bass boats. I suppose if I could rig it
right I might be able to use the motor on something down the road.


--
Public Fishing Forums
Fishing Link Index
www.YumaBassMan.com

webmaster
at
YumaBsssMan
dot
com
"go-bassn" > wrote in message
...
> Bob, how old is your MG? I'm told that since they've been digitizing the
> components things have taken a major change for the better, a year or so
> ago.
>
> Warren
> --
> http://www.warrenwolk.com/
>
>
>
> "Bob La Londe" > wrote in message
> ...
> > I found a good use for my MotorGunk.
> >
> > I used the power cord off of it to lengthen the power cord on ym
Evinrude
> > trolling motor.
> >
> > Maybe I can scrounge some other good parts.
> >
> > --
> > Public Fishing Forums
> > Fishing Link Index
> > www.YumaBassMan.com
> >
> > webmaster
> > at
> > YumaBsssMan
> > dot
> > com
> > "Bob La Londe" > wrote in message
> > ...
> > > As I mentioned in another post I took the Waco out today for its
maiden
> > > voayge.
> > >
> > > Amoung the various things I tested was the trolling motor. I pulled
the
> > > Motor Gunk off the Baker a while back and put on a new Minn Kota
Maxxum.
> > I
> > > love the Maxxum. Anyway, I had the Motor Gunk repaired figuring to
> either
> > > sell it, or use it on another boat. It had all new parts installed.
I
> > > dropped it in the water and after moving back and forth a couple times
I
> > > noticed the pointer was not pointing in the right direction, and
except
> at
> > > the absolute slowest speeds the darn thing was flopping back and forth
> > worse
> > > than the tail of a dog with a mouth full of bacon.
> > >
> > > As I pulled it out of the water I could hear parts rattling in the
motor
> > > head. ****! Motor Gunk has found its way to my, "I ain't gonna risk
a
> > dime
> > > on 'em list." If Motor Gunk wants to send me a free new motor I might
> try
> > > it and give them a second chance, but otherwise forget it.
> > >
> > > Fortunately, since nobody had expressed any interest in buying the
> Skeeter
> > I
> > > had already decided to start pulling stuff off of it for the Whacko.
It
> > > took me about ten minutes to pull that old reliable Evinrude trolling
> > motor
> > > off. Sometime tommorrow I am sure I'll have it mounted on the Whacko,
> and
> > > ready for a test run. While I was at it I pulled both fish finders
off
> he
> > > Skeeter as well in order to use them on the Whacko. I already mounted
> my
> > > Garmin 176 GPS map, so I will definitely be ready for that ABA
aluminum
> > > series coming up.
> > >
> > > --
> > > Public Fishing Forums
> > > Fishing Link Index
> > > www.YumaBassMan.com
> > >
> > > webmaster
> > > at
> > > YumaBsssMan
> > > dot
> > > com
> > >
> > >
> >
> >
>
>

[Roy Randolph]

Is this an electric steer or cable steer motor?

What model is it?


"Bob La Londe" > wrote in message
...
> I'm guessing its a 1994 or newer. Its not the electronics part that
sucks.
> Its the steering mechanism.
>
> I may take a look at converting it to a hand operated as a project for fun
> some time to use on my square back canoe for running the lower river, but
it
> will never go back on one of my bass boats. I suppose if I could rig it
> right I might be able to use the motor on something down the road.
>
>
> --
> Public Fishing Forums
> Fishing Link Index
> www.YumaBassMan.com
>
> webmaster
> at
> YumaBsssMan
> dot
> com
> "go-bassn" > wrote in message
> ...
> > Bob, how old is your MG? I'm told that since they've been digitizing
the
> > components things have taken a major change for the better, a year or so
> > ago.
> >
> > Warren
> > --
> > http://www.warrenwolk.com/
> >
> >
> >
> > "Bob La Londe" > wrote in message
> > ...
> > > I found a good use for my MotorGunk.
> > >
> > > I used the power cord off of it to lengthen the power cord on ym
> Evinrude
> > > trolling motor.
> > >
> > > Maybe I can scrounge some other good parts.
> > >
> > > --
> > > Public Fishing Forums
> > > Fishing Link Index
> > > www.YumaBassMan.com
> > >
> > > webmaster
> > > at
> > > YumaBsssMan
> > > dot
> > > com
> > > "Bob La Londe" > wrote in message
> > > ...
> > > > As I mentioned in another post I took the Waco out today for its
> maiden
> > > > voayge.
> > > >
> > > > Amoung the various things I tested was the trolling motor. I pulled
> the
> > > > Motor Gunk off the Baker a while back and put on a new Minn Kota
> Maxxum.
> > > I
> > > > love the Maxxum. Anyway, I had the Motor Gunk repaired figuring to
> > either
> > > > sell it, or use it on another boat. It had all new parts installed.
> I
> > > > dropped it in the water and after moving back and forth a couple
times
> I
> > > > noticed the pointer was not pointing in the right direction, and
> except
> > at
> > > > the absolute slowest speeds the darn thing was flopping back and
forth
> > > worse
> > > > than the tail of a dog with a mouth full of bacon.
> > > >
> > > > As I pulled it out of the water I could hear parts rattling in the
> motor
> > > > head. ****! Motor Gunk has found its way to my, "I ain't gonna
risk
> a
> > > dime
> > > > on 'em list." If Motor Gunk wants to send me a free new motor I
might
> > try
> > > > it and give them a second chance, but otherwise forget it.
> > > >
> > > > Fortunately, since nobody had expressed any interest in buying the
> > Skeeter
> > > I
> > > > had already decided to start pulling stuff off of it for the Whacko.
> It
> > > > took me about ten minutes to pull that old reliable Evinrude
trolling
> > > motor
> > > > off. Sometime tommorrow I am sure I'll have it mounted on the
Whacko,
> > and
> > > > ready for a test run. While I was at it I pulled both fish finders
> off
> > he
> > > > Skeeter as well in order to use them on the Whacko. I already
mounted
> > my
> > > > Garmin 176 GPS map, so I will definitely be ready for that ABA
> aluminum
> > > > series coming up.
> > > >
> > > > --
> > > > Public Fishing Forums
> > > > Fishing Link Index
> > > > www.YumaBassMan.com
> > > >
> > > > webmaster
> > > > at
> > > > YumaBsssMan
> > > > dot
> > > > com
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Bob La Londe]

Cable steer. 76lb don't recall which model.

--
Public Fishing Forums
Fishing Link Index
www.YumaBassMan.com

webmaster
at
YumaBsssMan
dot
com
"Roy Randolph" > wrote in message
...
> Is this an electric steer or cable steer motor?
>
> What model is it?
>
>
> "Bob La Londe" > wrote in message
> ...
> > I'm guessing its a 1994 or newer. Its not the electronics part that
> sucks.
> > Its the steering mechanism.
> >
> > I may take a look at converting it to a hand operated as a project for
fun
> > some time to use on my square back canoe for running the lower river,
but
> it
> > will never go back on one of my bass boats. I suppose if I could rig it
> > right I might be able to use the motor on something down the road.
> >
> >
> > --
> > Public Fishing Forums
> > Fishing Link Index
> > www.YumaBassMan.com
> >
> > webmaster
> > at
> > YumaBsssMan
> > dot
> > com
> > "go-bassn" > wrote in message
> > ...
> > > Bob, how old is your MG? I'm told that since they've been digitizing
> the
> > > components things have taken a major change for the better, a year or
so
> > > ago.
> > >
> > > Warren
> > > --
> > > http://www.warrenwolk.com/
> > >
> > >
> > >
> > > "Bob La Londe" > wrote in message
> > > ...
> > > > I found a good use for my MotorGunk.
> > > >
> > > > I used the power cord off of it to lengthen the power cord on ym
> > Evinrude
> > > > trolling motor.
> > > >
> > > > Maybe I can scrounge some other good parts.
> > > >
> > > > --
> > > > Public Fishing Forums
> > > > Fishing Link Index
> > > > www.YumaBassMan.com
> > > >
> > > > webmaster
> > > > at
> > > > YumaBsssMan
> > > > dot
> > > > com
> > > > "Bob La Londe" > wrote in message
> > > > ...
> > > > > As I mentioned in another post I took the Waco out today for its
> > maiden
> > > > > voayge.
> > > > >
> > > > > Amoung the various things I tested was the trolling motor. I
pulled
> > the
> > > > > Motor Gunk off the Baker a while back and put on a new Minn Kota
> > Maxxum.
> > > > I
> > > > > love the Maxxum. Anyway, I had the Motor Gunk repaired figuring
to
> > > either
> > > > > sell it, or use it on another boat. It had all new parts
installed.
> > I
> > > > > dropped it in the water and after moving back and forth a couple
> times
> > I
> > > > > noticed the pointer was not pointing in the right direction, and
> > except
> > > at
> > > > > the absolute slowest speeds the darn thing was flopping back and
> forth
> > > > worse
> > > > > than the tail of a dog with a mouth full of bacon.
> > > > >
> > > > > As I pulled it out of the water I could hear parts rattling in the
> > motor
> > > > > head. ****! Motor Gunk has found its way to my, "I ain't gonna
> risk
> > a
> > > > dime
> > > > > on 'em list." If Motor Gunk wants to send me a free new motor I
> might
> > > try
> > > > > it and give them a second chance, but otherwise forget it.
> > > > >
> > > > > Fortunately, since nobody had expressed any interest in buying the
> > > Skeeter
> > > > I
> > > > > had already decided to start pulling stuff off of it for the
Whacko.
> > It
> > > > > took me about ten minutes to pull that old reliable Evinrude
> trolling
> > > > motor
> > > > > off. Sometime tommorrow I am sure I'll have it mounted on the
> Whacko,
> > > and
> > > > > ready for a test run. While I was at it I pulled both fish
finders
> > off
> > > he
> > > > > Skeeter as well in order to use them on the Whacko. I already
> mounted
> > > my
> > > > > Garmin 176 GPS map, so I will definitely be ready for that ABA
> > aluminum
> > > > > series coming up.
> > > > >
> > > > > --
> > > > > Public Fishing Forums
> > > > > Fishing Link Index
> > > > > www.YumaBassMan.com
> > > > >
> > > > > webmaster
> > > > > at
> > > > > YumaBsssMan
> > > > > dot
> > > > > com
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Roy Randolph]

If it's not steering then check the cable end in the head if you hear parts
rattling around then it sounds like the tab lock came off or the plastic
screw post has broke

either way sounds like the place you took it to get it fixed didn't do a
good job!

"Bob La Londe" > wrote in message
...
> Cable steer. 76lb don't recall which model.
>
> --
> Public Fishing Forums
> Fishing Link Index
> www.YumaBassMan.com
>
> webmaster
> at
> YumaBsssMan
> dot
> com
> "Roy Randolph" > wrote in message
> ...
> > Is this an electric steer or cable steer motor?
> >
> > What model is it?
> >
> >
> > "Bob La Londe" > wrote in message
> > ...
> > > I'm guessing its a 1994 or newer. Its not the electronics part that
> > sucks.
> > > Its the steering mechanism.
> > >
> > > I may take a look at converting it to a hand operated as a project for
> fun
> > > some time to use on my square back canoe for running the lower river,
> but
> > it
> > > will never go back on one of my bass boats. I suppose if I could rig
it
> > > right I might be able to use the motor on something down the road.
> > >
> > >
> > > --
> > > Public Fishing Forums
> > > Fishing Link Index
> > > www.YumaBassMan.com
> > >
> > > webmaster
> > > at
> > > YumaBsssMan
> > > dot
> > > com
> > > "go-bassn" > wrote in message
> > > ...
> > > > Bob, how old is your MG? I'm told that since they've been
digitizing
> > the
> > > > components things have taken a major change for the better, a year
or
> so
> > > > ago.
> > > >
> > > > Warren
> > > > --
> > > > http://www.warrenwolk.com/
> > > >
> > > >
> > > >
> > > > "Bob La Londe" > wrote in message
> > > > ...
> > > > > I found a good use for my MotorGunk.
> > > > >
> > > > > I used the power cord off of it to lengthen the power cord on ym
> > > Evinrude
> > > > > trolling motor.
> > > > >
> > > > > Maybe I can scrounge some other good parts.
> > > > >
> > > > > --
> > > > > Public Fishing Forums
> > > > > Fishing Link Index
> > > > > www.YumaBassMan.com
> > > > >
> > > > > webmaster
> > > > > at
> > > > > YumaBsssMan
> > > > > dot
> > > > > com
> > > > > "Bob La Londe" > wrote in message
> > > > > ...
> > > > > > As I mentioned in another post I took the Waco out today for its
> > > maiden
> > > > > > voayge.
> > > > > >
> > > > > > Amoung the various things I tested was the trolling motor. I
> pulled
> > > the
> > > > > > Motor Gunk off the Baker a while back and put on a new Minn Kota
> > > Maxxum.
> > > > > I
> > > > > > love the Maxxum. Anyway, I had the Motor Gunk repaired figuring
> to
> > > > either
> > > > > > sell it, or use it on another boat. It had all new parts
> installed.
> > > I
> > > > > > dropped it in the water and after moving back and forth a couple
> > times
> > > I
> > > > > > noticed the pointer was not pointing in the right direction, and
> > > except
> > > > at
> > > > > > the absolute slowest speeds the darn thing was flopping back and
> > forth
> > > > > worse
> > > > > > than the tail of a dog with a mouth full of bacon.
> > > > > >
> > > > > > As I pulled it out of the water I could hear parts rattling in
the
> > > motor
> > > > > > head. ****! Motor Gunk has found its way to my, "I ain't gonna
> > risk
> > > a
> > > > > dime
> > > > > > on 'em list." If Motor Gunk wants to send me a free new motor I
> > might
> > > > try
> > > > > > it and give them a second chance, but otherwise forget it.
> > > > > >
> > > > > > Fortunately, since nobody had expressed any interest in buying
the
> > > > Skeeter
> > > > > I
> > > > > > had already decided to start pulling stuff off of it for the
> Whacko.
> > > It
> > > > > > took me about ten minutes to pull that old reliable Evinrude
> > trolling
> > > > > motor
> > > > > > off. Sometime tommorrow I am sure I'll have it mounted on the
> > Whacko,
> > > > and
> > > > > > ready for a test run. While I was at it I pulled both fish
> finders
> > > off
> > > > he
> > > > > > Skeeter as well in order to use them on the Whacko. I already
> > mounted
> > > > my
> > > > > > Garmin 176 GPS map, so I will definitely be ready for that ABA
> > > aluminum
> > > > > > series coming up.
> > > > > >
> > > > > > --
> > > > > > Public Fishing Forums
> > > > > > Fishing Link Index
> > > > > > www.YumaBassMan.com
> > > > > >
> > > > > > webmaster
> > > > > > at
> > > > > > YumaBsssMan
> > > > > > dot
> > > > > > com
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Bob La Londe]

Maybe they didn't, but I'm just not going to waste any more money on it. I
have trolling motors for both of my boats so I do not need to.

I am familiar with how the steering works on the motor. I repaired it once,
and then the next time it died becasue the gear snapped off the top of the
shaft. I had somebody else repair that. This time I haven't even pulled
the cover to look.

I have talked to several other people in this area who do not like Motor
Guide motors for one reason or another. The Evinrude trolling motor I
pulled off my old boat to replace the Motor Gunk is over 20 years old with
no problems. Its only 50 lbs, but it should pull that 16' aluminum boat
just fine. When I run out of projects (yeah right) I'll pull the cover off
the Motor Gunk and take a look at it.
--
Public Fishing Forums
Fishing Link Index
www.YumaBassMan.com

webmaster
at
YumaBsssMan
dot
com
"Roy Randolph" > wrote in message
...
> If it's not steering then check the cable end in the head if you hear
parts
> rattling around then it sounds like the tab lock came off or the plastic
> screw post has broke
>
> either way sounds like the place you took it to get it fixed didn't do a
> good job!
>
> "Bob La Londe" > wrote in message
> ...
> > Cable steer. 76lb don't recall which model.
> >
> > --
> > Public Fishing Forums
> > Fishing Link Index
> > www.YumaBassMan.com
> >
> > webmaster
> > at
> > YumaBsssMan
> > dot
> > com
> > "Roy Randolph" > wrote in message
> > ...
> > > Is this an electric steer or cable steer motor?
> > >
> > > What model is it?
> > >
> > >
> > > "Bob La Londe" > wrote in message
> > > ...
> > > > I'm guessing its a 1994 or newer. Its not the electronics part that
> > > sucks.
> > > > Its the steering mechanism.
> > > >
> > > > I may take a look at converting it to a hand operated as a project
for
> > fun
> > > > some time to use on my square back canoe for running the lower
river,
> > but
> > > it
> > > > will never go back on one of my bass boats. I suppose if I could
rig
> it
> > > > right I might be able to use the motor on something down the road.
> > > >
> > > >
> > > > --
> > > > Public Fishing Forums
> > > > Fishing Link Index
> > > > www.YumaBassMan.com
> > > >
> > > > webmaster
> > > > at
> > > > YumaBsssMan
> > > > dot
> > > > com
> > > > "go-bassn" > wrote in message
> > > > ...
> > > > > Bob, how old is your MG? I'm told that since they've been
> digitizing
> > > the
> > > > > components things have taken a major change for the better, a year
> or
> > so
> > > > > ago.
> > > > >
> > > > > Warren
> > > > > --
> > > > > http://www.warrenwolk.com/
> > > > >
> > > > >
> > > > >
> > > > > "Bob La Londe" > wrote in message
> > > > > ...
> > > > > > I found a good use for my MotorGunk.
> > > > > >
> > > > > > I used the power cord off of it to lengthen the power cord on ym
> > > > Evinrude
> > > > > > trolling motor.
> > > > > >
> > > > > > Maybe I can scrounge some other good parts.
> > > > > >
> > > > > > --
> > > > > > Public Fishing Forums
> > > > > > Fishing Link Index
> > > > > > www.YumaBassMan.com
> > > > > >
> > > > > > webmaster
> > > > > > at
> > > > > > YumaBsssMan
> > > > > > dot
> > > > > > com
> > > > > > "Bob La Londe" > wrote in message
> > > > > > ...
> > > > > > > As I mentioned in another post I took the Waco out today for
its
> > > > maiden
> > > > > > > voayge.
> > > > > > >
> > > > > > > Amoung the various things I tested was the trolling motor. I
> > pulled
> > > > the
> > > > > > > Motor Gunk off the Baker a while back and put on a new Minn
Kota
> > > > Maxxum.
> > > > > > I
> > > > > > > love the Maxxum. Anyway, I had the Motor Gunk repaired
figuring
> > to
> > > > > either
> > > > > > > sell it, or use it on another boat. It had all new parts
> > installed.
> > > > I
> > > > > > > dropped it in the water and after moving back and forth a
couple
> > > times
> > > > I
> > > > > > > noticed the pointer was not pointing in the right direction,
and
> > > > except
> > > > > at
> > > > > > > the absolute slowest speeds the darn thing was flopping back
and
> > > forth
> > > > > > worse
> > > > > > > than the tail of a dog with a mouth full of bacon.
> > > > > > >
> > > > > > > As I pulled it out of the water I could hear parts rattling in
> the
> > > > motor
> > > > > > > head. ****! Motor Gunk has found its way to my, "I ain't
gonna
> > > risk
> > > > a
> > > > > > dime
> > > > > > > on 'em list." If Motor Gunk wants to send me a free new motor
I
> > > might
> > > > > try
> > > > > > > it and give them a second chance, but otherwise forget it.
> > > > > > >
> > > > > > > Fortunately, since nobody had expressed any interest in buying
> the
> > > > > Skeeter
> > > > > > I
> > > > > > > had already decided to start pulling stuff off of it for the
> > Whacko.
> > > > It
> > > > > > > took me about ten minutes to pull that old reliable Evinrude
> > > trolling
> > > > > > motor
> > > > > > > off. Sometime tommorrow I am sure I'll have it mounted on the
> > > Whacko,
> > > > > and
> > > > > > > ready for a test run. While I was at it I pulled both fish
> > finders
> > > > off
> > > > > he
> > > > > > > Skeeter as well in order to use them on the Whacko. I already
> > > mounted
> > > > > my
> > > > > > > Garmin 176 GPS map, so I will definitely be ready for that ABA
> > > > aluminum
> > > > > > > series coming up.
> > > > > > >
> > > > > > > --
> > > > > > > Public Fishing Forums
> > > > > > > Fishing Link Index
> > > > > > > www.YumaBassMan.com
> > > > > > >
> > > > > > > webmaster
> > > > > > > at
> > > > > > > YumaBsssMan
> > > > > > > dot
> > > > > > > com
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[go-bassn]

I wouldn't waste any money on a 94 either Bob...

WW

"Bob La Londe" > wrote in message
...
> Maybe they didn't, but I'm just not going to waste any more money on it.
I
> have trolling motors for both of my boats so I do not need to.
>
> I am familiar with how the steering works on the motor. I repaired it
once,
> and then the next time it died becasue the gear snapped off the top of the
> shaft. I had somebody else repair that. This time I haven't even pulled
> the cover to look.
>
> I have talked to several other people in this area who do not like Motor
> Guide motors for one reason or another. The Evinrude trolling motor I
> pulled off my old boat to replace the Motor Gunk is over 20 years old with
> no problems. Its only 50 lbs, but it should pull that 16' aluminum boat
> just fine. When I run out of projects (yeah right) I'll pull the cover
off
> the Motor Gunk and take a look at it.
> --
> Public Fishing Forums
> Fishing Link Index
> www.YumaBassMan.com
>
> webmaster
> at
> YumaBsssMan
> dot
> com
> "Roy Randolph" > wrote in message
> ...
> > If it's not steering then check the cable end in the head if you hear
> parts
> > rattling around then it sounds like the tab lock came off or the plastic
> > screw post has broke
> >
> > either way sounds like the place you took it to get it fixed didn't do a
> > good job!
> >
> > "Bob La Londe" > wrote in message
> > ...
> > > Cable steer. 76lb don't recall which model.
> > >
> > > --
> > > Public Fishing Forums
> > > Fishing Link Index
> > > www.YumaBassMan.com
> > >
> > > webmaster
> > > at
> > > YumaBsssMan
> > > dot
> > > com
> > > "Roy Randolph" > wrote in message
> > > ...
> > > > Is this an electric steer or cable steer motor?
> > > >
> > > > What model is it?
> > > >
> > > >
> > > > "Bob La Londe" > wrote in message
> > > > ...
> > > > > I'm guessing its a 1994 or newer. Its not the electronics part
that
> > > > sucks.
> > > > > Its the steering mechanism.
> > > > >
> > > > > I may take a look at converting it to a hand operated as a project
> for
> > > fun
> > > > > some time to use on my square back canoe for running the lower
> river,
> > > but
> > > > it
> > > > > will never go back on one of my bass boats. I suppose if I could
> rig
> > it
> > > > > right I might be able to use the motor on something down the road.
> > > > >
> > > > >
> > > > > --
> > > > > Public Fishing Forums
> > > > > Fishing Link Index
> > > > > www.YumaBassMan.com
> > > > >
> > > > > webmaster
> > > > > at
> > > > > YumaBsssMan
> > > > > dot
> > > > > com
> > > > > "go-bassn" > wrote in message
> > > > > ...
> > > > > > Bob, how old is your MG? I'm told that since they've been
> > digitizing
> > > > the
> > > > > > components things have taken a major change for the better, a
year
> > or
> > > so
> > > > > > ago.
> > > > > >
> > > > > > Warren
> > > > > > --
> > > > > > http://www.warrenwolk.com/
> > > > > >
> > > > > >
> > > > > >
> > > > > > "Bob La Londe" > wrote in message
> > > > > > ...
> > > > > > > I found a good use for my MotorGunk.
> > > > > > >
> > > > > > > I used the power cord off of it to lengthen the power cord on
ym
> > > > > Evinrude
> > > > > > > trolling motor.
> > > > > > >
> > > > > > > Maybe I can scrounge some other good parts.
> > > > > > >
> > > > > > > --
> > > > > > > Public Fishing Forums
> > > > > > > Fishing Link Index
> > > > > > > www.YumaBassMan.com
> > > > > > >
> > > > > > > webmaster
> > > > > > > at
> > > > > > > YumaBsssMan
> > > > > > > dot
> > > > > > > com
> > > > > > > "Bob La Londe" > wrote in message
> > > > > > > ...
> > > > > > > > As I mentioned in another post I took the Waco out today for
> its
> > > > > maiden
> > > > > > > > voayge.
> > > > > > > >
> > > > > > > > Amoung the various things I tested was the trolling motor.
I
> > > pulled
> > > > > the
> > > > > > > > Motor Gunk off the Baker a while back and put on a new Minn
> Kota
> > > > > Maxxum.
> > > > > > > I
> > > > > > > > love the Maxxum. Anyway, I had the Motor Gunk repaired
> figuring
> > > to
> > > > > > either
> > > > > > > > sell it, or use it on another boat. It had all new parts
> > > installed.
> > > > > I
> > > > > > > > dropped it in the water and after moving back and forth a
> couple
> > > > times
> > > > > I
> > > > > > > > noticed the pointer was not pointing in the right direction,
> and
> > > > > except
> > > > > > at
> > > > > > > > the absolute slowest speeds the darn thing was flopping back
> and
> > > > forth
> > > > > > > worse
> > > > > > > > than the tail of a dog with a mouth full of bacon.
> > > > > > > >
> > > > > > > > As I pulled it out of the water I could hear parts rattling
in
> > the
> > > > > motor
> > > > > > > > head. ****! Motor Gunk has found its way to my, "I ain't
> gonna
> > > > risk
> > > > > a
> > > > > > > dime
> > > > > > > > on 'em list." If Motor Gunk wants to send me a free new
motor
> I
> > > > might
> > > > > > try
> > > > > > > > it and give them a second chance, but otherwise forget it.
> > > > > > > >
> > > > > > > > Fortunately, since nobody had expressed any interest in
buying
> > the
> > > > > > Skeeter
> > > > > > > I
> > > > > > > > had already decided to start pulling stuff off of it for the
> > > Whacko.
> > > > > It
> > > > > > > > took me about ten minutes to pull that old reliable Evinrude
> > > > trolling
> > > > > > > motor
> > > > > > > > off. Sometime tommorrow I am sure I'll have it mounted on
the
> > > > Whacko,
> > > > > > and
> > > > > > > > ready for a test run. While I was at it I pulled both fish
> > > finders
> > > > > off
> > > > > > he
> > > > > > > > Skeeter as well in order to use them on the Whacko. I
already
> > > > mounted
> > > > > > my
> > > > > > > > Garmin 176 GPS map, so I will definitely be ready for that
ABA
> > > > > aluminum
> > > > > > > > series coming up.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Public Fishing Forums
> > > > > > > > Fishing Link Index
> > > > > > > > www.YumaBassMan.com
> > > > > > > >
> > > > > > > > webmaster
> > > > > > > > at
> > > > > > > > YumaBsssMan
> > > > > > > > dot
> > > > > > > > com
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>