Baud Rate

[Steve & Chris Clark]

I can change my baud rate from between 1200 baud and 115200 baud on NMEA
data, what or why would different settings be chosen over another setting?
My default baud is 9600. I do not have a DGPS receiver installed (yet) on
the GPS unit. Is this a worth while option? I do have a "pinning" setting
on the GPS, is there a Baud setting that best compliments "pinning"?
--
Stony N44 33.240 W78 06.771


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04

[Bob Rickard]

Huh? What? Who? Now I'm really getting a headache! I gonna get me some
worms, a cane pole, and then I'm outta here. Anybody want some bluegill?
--
Bob Rickard
(AKA Dr. Spinnerbait)
www.secretweaponlures.com
--------------------------<=x O')))><

"Steve & Chris Clark" > wrote in message
...
> I can change my baud rate from between 1200 baud and 115200 baud on NMEA
> data, what or why would different settings be chosen over another setting?
> My default baud is 9600. I do not have a DGPS receiver installed (yet) on
> the GPS unit. Is this a worth while option? I do have a "pinning"
setting
> on the GPS, is there a Baud setting that best compliments "pinning"?
> --
> Stony N44 33.240 W78 06.771
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
>
>

[Steve & Chris Clark]

LOL Bob! What I would like to do is some detailed hydrographic mapping of
areas on the lake with the split screen, fishfinder and the GPS but I don't
want to be doing it at twenty miles per hour. Speed might be good for a
heading but soundings will be a bugger as some of the shoal and humps are
wild. Some go from forty ft.depth right up to four ft.depths in less than
a hundred ft. horizontally.
--
Stony

"Bob Rickard" > wrote in message
...
> Huh? What? Who? Now I'm really getting a headache! I gonna get me some
> worms, a cane pole, and then I'm outta here. Anybody want some bluegill?
> --
> Bob Rickard
> (AKA Dr. Spinnerbait)
> www.secretweaponlures.com
> --------------------------<=x O')))><



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04

[Calif Bill]

Internally BAUD rate does not matter. Only if hooking up other devices eg.
Laptop, VHF radio, etc. does the BAUD rate matter,

"Steve & Chris Clark" > wrote in message
...
> LOL Bob! What I would like to do is some detailed hydrographic mapping of
> areas on the lake with the split screen, fishfinder and the GPS but I
don't
> want to be doing it at twenty miles per hour. Speed might be good for a
> heading but soundings will be a bugger as some of the shoal and humps are
> wild. Some go from forty ft.depth right up to four ft.depths in less
than
> a hundred ft. horizontally.
> --
> Stony
>
> "Bob Rickard" > wrote in message
> ...
> > Huh? What? Who? Now I'm really getting a headache! I gonna get me some
> > worms, a cane pole, and then I'm outta here. Anybody want some bluegill?
> > --
> > Bob Rickard
> > (AKA Dr. Spinnerbait)
> > www.secretweaponlures.com
> > --------------------------<=x O')))><
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
>
>

[Steve & Chris Clark]

Thanks CB, I would like to use the lap top, could you recommend a setting?
The higher the better or would that slow down the lap top?(too much data?)
The lower number communicates faster to the lap top? (enough data?)
It has two MMC cards that you can record moving data on, do you know, would
they benefit from using a certain baud rate?
--
Stony

"Calif Bill" > wrote in message
ink.net...
> Internally BAUD rate does not matter. Only if hooking up other devices
eg.
> Laptop, VHF radio, etc. does the BAUD rate matter,
>
> "Steve & Chris Clark" > wrote in message
> ...
> > LOL Bob! What I would like to do is some detailed hydrographic mapping
of
> > areas on the lake with the split screen, fishfinder and the GPS but I
> don't
> > want to be doing it at twenty miles per hour. Speed might be good for a
> > heading but soundings will be a bugger as some of the shoal and humps
are
> > wild. Some go from forty ft.depth right up to four ft.depths in less
> than
> > a hundred ft. horizontally.
> > --
> > Stony
> >
> > "Bob Rickard" > wrote in message
> > ...
> > > Huh? What? Who? Now I'm really getting a headache! I gonna get me some
> > > worms, a cane pole, and then I'm outta here. Anybody want some
bluegill?
> > > --
> > > Bob Rickard
> > > (AKA Dr. Spinnerbait)
> > > www.secretweaponlures.com
> > > --------------------------<=x O')))><
> >
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04

[Illinois Fisherman]

Baud rate indicates the speed at which the data is transmitted between two
serial devices. Try the fastest first. If you get data loss or dropout at
the highest speed drop the baud rate down until you get solid data transfer
between the two units. If there is an auto setting use that. Then both units
will negotiate a reliable setting each time the unit is turned on.


"Steve & Chris Clark" > wrote in message
...
>I can change my baud rate from between 1200 baud and 115200 baud on NMEA
> data, what or why would different settings be chosen over another setting?
> My default baud is 9600. I do not have a DGPS receiver installed (yet) on
> the GPS unit. Is this a worth while option? I do have a "pinning"
> setting
> on the GPS, is there a Baud setting that best compliments "pinning"?
> --
> Stony N44 33.240 W78 06.771
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
>
>

[Jeff Durham]

If you are hooking this up to a computer, I would recommend 115200 for the
fastest possible speed. Serial ports on computers for a long time have
supported these high bit rates without problems. Take for instance a 56K
modem. Even though the throughput is only 56,000, you would still setup the
connection between the computer and modem as 115200. The reason is that the
modem could compress data so you need to let it empty and fill its buffers
quicker than 56K.

Jeff


"Steve & Chris Clark" > wrote in message
...
> I can change my baud rate from between 1200 baud and 115200 baud on NMEA
> data, what or why would different settings be chosen over another setting?
> My default baud is 9600. I do not have a DGPS receiver installed (yet) on
> the GPS unit. Is this a worth while option? I do have a "pinning"
setting
> on the GPS, is there a Baud setting that best compliments "pinning"?
> --
> Stony N44 33.240 W78 06.771
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
>
>

[Steve & Chris Clark]

Thanks much guys. I have a 16MB internal card to record data. A card
reading port that connects to a USB port on the lap top.
I get it, the more baud rate the more detail you gather, kind of like the
three settings on the VCR, the 2 HR setting gives a better picture while
using more tape and inversely the same amount of tape can be used to record
6 HRs with the picture quality being sacrificed due to the less amount of
data being recorded at the slower "baud" rate if you will.
--
Stony

"Jeff Durham" > wrote in message
...
> If you are hooking this up to a computer, I would recommend 115200 for the
> fastest possible speed. Serial ports on computers for a long time have
> supported these high bit rates without problems. Take for instance a 56K
> modem. Even though the throughput is only 56,000, you would still setup
the
> connection between the computer and modem as 115200. The reason is that
the
> modem could compress data so you need to let it empty and fill its buffers
> quicker than 56K.
>
> Jeff
>
>
> "Steve & Chris Clark" > wrote in message
> ...
> > I can change my baud rate from between 1200 baud and 115200 baud on
NMEA
> > data, what or why would different settings be chosen over another
setting?
> > My default baud is 9600. I do not have a DGPS receiver installed (yet)
on
> > the GPS unit. Is this a worth while option? I do have a "pinning"
> setting
> > on the GPS, is there a Baud setting that best compliments "pinning"?
> > --
> > Stony N44 33.240 W78 06.771
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04

[Calif Bill]

Nope. Higher BAUD rate is just putting a bigger hose on the tank to empty
it. Same data, just dumped faster.
Bill

"Steve & Chris Clark" > wrote in message
...
> Thanks much guys. I have a 16MB internal card to record data. A card
> reading port that connects to a USB port on the lap top.
> I get it, the more baud rate the more detail you gather, kind of like the
> three settings on the VCR, the 2 HR setting gives a better picture while
> using more tape and inversely the same amount of tape can be used to
record
> 6 HRs with the picture quality being sacrificed due to the less amount of
> data being recorded at the slower "baud" rate if you will.
> --
> Stony
>
> "Jeff Durham" > wrote in message
> ...
> > If you are hooking this up to a computer, I would recommend 115200 for
the
> > fastest possible speed. Serial ports on computers for a long time have
> > supported these high bit rates without problems. Take for instance a
56K
> > modem. Even though the throughput is only 56,000, you would still setup
> the
> > connection between the computer and modem as 115200. The reason is that
> the
> > modem could compress data so you need to let it empty and fill its
buffers
> > quicker than 56K.
> >
> > Jeff
> >
> >
> > "Steve & Chris Clark" > wrote in message
> > ...
> > > I can change my baud rate from between 1200 baud and 115200 baud on
> NMEA
> > > data, what or why would different settings be chosen over another
> setting?
> > > My default baud is 9600. I do not have a DGPS receiver installed
(yet)
> on
> > > the GPS unit. Is this a worth while option? I do have a "pinning"
> > setting
> > > on the GPS, is there a Baud setting that best compliments "pinning"?
> > > --
> > > Stony N44 33.240 W78
06.771
> > >
> > >
> > > ---
> > > Outgoing mail is certified Virus Free.
> > > Checked by AVG anti-virus system (http://www.grisoft.com).
> > > Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
> > >
> > >
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.708 / Virus Database: 464 - Release Date: 6/18/04
>
>