View Full Version : Oooopss. Repairing Bivvy
Zoe
February 6th, 2004, 08:39 PM
Hi guys.
I went out fishing recently in the rain, then I thought I would be clever
and leave the bivvy in the car port to dry out.
Well, a mouse decided it would also make a good material to waterproof it's
nest with!
Holes are covering approx 8 inches diameter on the outer canvas.
Any ideal on repair solutions?
Derek.Moody
February 6th, 2004, 10:44 PM
In article >, Zoe
> wrote:
> Hi guys.
>
> I went out fishing recently in the rain, then I thought I would be clever
> and leave the bivvy in the car port to dry out.
>
> Well, a mouse decided it would also make a good material to waterproof it's
> nest with!
>
> Holes are covering approx 8 inches diameter on the outer canvas.
>
> Any ideal on repair solutions?
The proper way:
Order a bit of the correct material, find someone with an industrial sewing
machine, patch and reproof.
The lateral way:
Trim hole neatly. Glue a sheet of heavy-grade transparent pvc (use proper
pvc adhesive) over hole. It will be much stronger if you stitch it round the
edge and glue a strip of pvc over the stitching inside and out. Call it a
window.
Cheerio,
--
>>
Alex
February 7th, 2004, 05:27 AM
"Zoe" > wrote in message
...
> Hi guys.
> Holes are covering approx 8 inches diameter on the outer canvas.
--------------------------------------------------
If it was actually canvas! it could not be easier. get a patch stiched in
and reproof.
Bryan Hall
February 7th, 2004, 02:10 PM
Ah - the wonders of duct tape - use it on either side and it will be
waterproof in minutes
"Zoe" > wrote in message
...
> Hi guys.
>
> I went out fishing recently in the rain, then I thought I would be clever
> and leave the bivvy in the car port to dry out.
>
> Well, a mouse decided it would also make a good material to waterproof
it's
> nest with!
>
> Holes are covering approx 8 inches diameter on the outer canvas.
>
> Any ideal on repair solutions?
>
>
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.