attaching chain
 

I think the thing that what we're not following might be this:

It seems to me that he (Sierra Fisher) possibly has some sort of a system
whereby a pulley in this rode management system won't admit chain, so he
can't get the chain to come up through it when weighing anchor. He might be
thinking that he wants the weight of chain but it doesn't work in his
(somewhat unorthodox) system, so is wondering about a sliding weight - a
"kellet."

If that interpretation of his message is correct (is it?), then i) a kellet
should help, but won't replace all the functions of chain (which does more
than just add weight - abrasion protection being one other important
factor), ii) the kellet shackle itself might abrade on the line where it
attaches, if he used the sliding system he describes.

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"Sierra fisher" wrote in message
...
I have a pontoon boat, and had this anchoring problem this week on the
American River. My boat has a rear deck that is just a foot or so off
of
the water. Below it is a pulley for the anchor.
Without the chain, I pull the anchor up to the pulley and out of the
water.
With the chain in the line, my anchor will be suspended in the water a
little less than the length of the chain.
If I could find a heavy ball, maybe 3" in diameter, and attach it just
above
the anchor, it might pull the anchor over. Then my anchor would be
suspended just at the water level.
What if this ball, or perhaps a diving weight, was attached via a ring
that
could slide up and down the rope?
--


.
"BEAU" wrote in message
...
what good would would it do to attach both rope & chain to the anchor?
"Peggie Hall" wrote in message
...

attaching chain
 

How do you know that?

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"Wayne.B" wrote in message
...
AND, (Very Important) - Safety wire the shackle pins, or use a small
nylon wire tie to accomplish the same thing. It's absolutely amazing
how fast wave action can back out a shackle pin if its not secured in
some way.

Don't ask me how I know this...

attaching chain
 

Good point. We might add that Bowgus means to attach the bitter end, not
just "the rope," which will also of course be cleated or otherwise secured
somewhere along its length.

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"Bowgus" wrote in message
e.rogers.com...
And before you stretch out for a snooze ... connect the rope to the boat.

"Peggie Hall" wrote in message
...


Steve @ OutdoorFrontiers wrote:
"Sierra fisher" wrote in message
...

Stupid question: Do you attach the rope to the chain and the chain to
the
anchor OR attach both the rope and chain to the anchor, ie, chain is
not
attached to rope?


Not a stupid question at all. Attach the chain to the anchor, the
rope
to
the chain. Bingo, now you're in business.

The other question is HOW to attach the rope to the chain and the chain
to the anchor...just tying it on is not the recommended method.

Splice a thimble into end of the rope (or, if you don't know how and
don't want to learn how, you can buy anchor line with a thimble already
spliced into one end)...use shackles to attach the chain to the rope
and to the anchor.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1

attaching chain
 

Sierra fisher might have been wondering if the chain had any other functions
than simply adding dead weight. By now he will know...

(If that's all chain did, one could simply use a bigger anchor to achieve
similar results.)

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"BEAU" wrote in message
...
what good would would it do to attach both rope & chain to the anchor?

attaching chain
 

If you are using a reel to hold the rope tie the bitter end to the reel and run the rope through a pat eye then to the anchor.
Besure to put a figgure eight knot in the lin so that when you play out all the anchor line the stain is on the pat eye and not your
plasitc hose reel (put the knot between the reel and the pat eye allowing enough slack so you don't break your reel). Now annd a
cleat to tie the anchor line off to when not using the full length of line. Doc
================================================== ==================

"Charles T. Low" wrote in message ...
Good point. We might add that Bowgus means to attach the bitter end, not
just "the rope," which will also of course be cleated or otherwise secured
somewhere along its length.

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"Bowgus" wrote in message
e.rogers.com...
And before you stretch out for a snooze ... connect the rope to the boat.

"Peggie Hall" wrote in message
...


Steve @ OutdoorFrontiers wrote:
"Sierra fisher" wrote in message
...

Stupid question: Do you attach the rope to the chain and the chain to
the
anchor OR attach both the rope and chain to the anchor, ie, chain is
not
attached to rope?


Not a stupid question at all. Attach the chain to the anchor, the
rope
to
the chain. Bingo, now you're in business.

The other question is HOW to attach the rope to the chain and the chain
to the anchor...just tying it on is not the recommended method.

Splice a thimble into end of the rope (or, if you don't know how and
don't want to learn how, you can buy anchor line with a thimble already
spliced into one end)...use shackles to attach the chain to the rope
and to the anchor.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1

attaching chain
 

On Sun, 13 Jun 2004 06:48:28 -0400, "Charles T. Low"
wrote:

How do you know that?

===========================

It's called: "Coming up empty handed".

....in a very real sense of the expression.

:-)

attaching chain
 

Sierra fisher wrote:
I have a pontoon boat, and had this anchoring problem this week on the
American River. My boat has a rear deck that is just a foot or so off of
the water. Below it is a pulley for the anchor.
Without the chain, I pull the anchor up to the pulley and out of the water.
With the chain in the line, my anchor will be suspended in the water a
little less than the length of the chain.
If I could find a heavy ball, maybe 3" in diameter, and attach it just above
the anchor, it might pull the anchor over. Then my anchor would be
suspended just at the water level.
What if this ball, or perhaps a diving weight, was attached via a ring that
could slide up and down the rope?

When I lived near the Delta by San Francisco a chain on the anchor line
was needed due to the fast current and wave action to keep a boat in
place. Now living near a lake in the mid west and also using a pontoon
I don't bother with a chain for the very reason you stated. The trick
is using the proper anchor and plenty of anchor rope to get the anchor
to dig in. Using a chain is not necessary in all situations and lakes
are one of those situations.

Jerry

attaching chain
 

Peggie Hall wrote:
BEAU wrote:

what good would would it do to attach both rope & chain to the anchor?


I thought it would obvious to anyone following this discussion that one
end of the chain attaches to the rope, the other end of the chain to the
anchor. Apparently I was wrong...

Peggie Hall



Yes, you were ............... things can only be obvious if you have
some experience in the area of the obvious. Now that it was explained
to him it is probable "now" obvious..........

Jerry

attaching chain
 

I need to stop posting when I'm tired. I have enough trouble typing when I'm awake! Doc
================================================== =============

"Doc (The Tin Boat King)" wrote in message ...
If you are using a reel to hold the rope tie the bitter end to the reel and run the rope through a pat eye then to the anchor.
Besure to put a figgure eight knot in the lin so that when you play out all the anchor line the stain is on the pat eye and not your
plasitc hose reel (put the knot between the reel and the pat eye allowing enough slack so you don't break your reel). Now annd a
cleat to tie the anchor line off to when not using the full length of line. Doc
================================================== ==================

"Charles T. Low" wrote in message ...
Good point. We might add that Bowgus means to attach the bitter end, not
just "the rope," which will also of course be cleated or otherwise secured
somewhere along its length.

====

Charles T. Low
- remove "UN"
www.boatdocking.com/BDPhoto.html - Photo Contest
www.boatdocking.com
www.ctlow.ca/Trojan26 - my boat

====

"Bowgus" wrote in message
e.rogers.com...
And before you stretch out for a snooze ... connect the rope to the boat.

"Peggie Hall" wrote in message
...


Steve @ OutdoorFrontiers wrote:
"Sierra fisher" wrote in message
...

Stupid question: Do you attach the rope to the chain and the chain to
the
anchor OR attach both the rope and chain to the anchor, ie, chain is
not
attached to rope?


Not a stupid question at all. Attach the chain to the anchor, the
rope
to
the chain. Bingo, now you're in business.

The other question is HOW to attach the rope to the chain and the chain
to the anchor...just tying it on is not the recommended method.

Splice a thimble into end of the rope (or, if you don't know how and
don't want to learn how, you can buy anchor line with a thimble already
spliced into one end)...use shackles to attach the chain to the rope
and to the anchor.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1

anchor question...>>>
 

"Marty S." wrote in message
...
Question... for a small jon boat on a reservoir (I'm in Maryland, and I
fish on Liberty Reservoir, for those of you familiar with this area), what
type of anchor would be best? I presently have a small "mushroom" anchor
(8
lbs, I think) but it doesn't hold the boat in place -- I tend to drift.
Any
suggestions? I think the bottom is mostly mud but I'm not exactly sure.

--
Marty S.
Baltimore, MD USA



VERY IMPORTANT TIP KNOWN BY ALL REAL SEAMEN:

Use an anchor rope that is three times your depth. Otherwise your boat
keeps picking up the anchor and dropping a short distance away.

You're welcome.

Steve