![]() |
Wading boot selection problem
I have a somewhat specialized boot selection problem, perhaps you can help me out. For me, traveling to a small stream often involves public transportation. This means that I have to carry _all_ my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. My working plan is to find a pair of lightweight wading boots that do not absorb a lot of water, and therefore are as close to ordinary boots as possible after a day of fishing. Wearing the boots on the way to a stream, and on the stream with hip waders is of course no problem. What may turn out to be cumbersome is using the same boots on my way back home. The plan is to use the boots with waterproof, breathable socks (Sealskinz). What I need to make sure is that the new wading boots - are faily good wading boots, naturally - are comfortable hiking boots - do not absorb a lot of water. I think that the local dealers carry the products from some major manufacturers - like Simms, Weinbrenner and Orvis - but not from all the manufacturers that you have. However, I can of course order anything on the net. My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html However, I would have to order these boots without seeing them, so I don't know whether they're good for what I'm looking for. There might also be other boots out there that I'm not aware of. Or maybe my approach is wrong - or doomed. I would really appreciate your input on this. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
"Jarmo Hurri" wrote in message
... For me, traveling to a small stream often involves public transportation. This means that I have to carry _all_ my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. One possible solution is genuine moccasins, the kind made from a single piece of thick leather, with no external sole attached. These are about the lightest shoes possible, also mould to the shape of your foot when wet, and then dry quickly -- thus an excellent boat shoe, which I also use when wading wet for bass-- fairly good grip on underwater rocks. But moccasins offer no support to the foot, if you need that to walk a long distance. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
Wading boot selection problem
"Jarmo Hurri" wrote in message
... For me, traveling to a small stream often involves public transportation. This means that I have to carry _all_ my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. One possible solution is genuine moccasins, the kind made from a single piece of thick leather, with no external sole attached. These are about the lightest shoes possible, also mould to the shape of your foot when wet, and then dry quickly -- thus an excellent boat shoe, which I also use when wading wet for bass-- fairly good grip on underwater rocks. But moccasins offer no support to the foot, if you need that to walk a long distance. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
Wading boot selection problem
I would not recommend Simms boots. I have the light pair and after two
seasons have worn the boots out. Not the soles, but rather the "pleather" reiforncements on the sides of the boots. I do not but would like to own a pair of Chotas. The Orivs convertable boots look (and feel) solid and changing soles for walking seems easy. "Jarmo Hurri" wrote in message ... I have a somewhat specialized boot selection problem, perhaps you can help me out. For me, traveling to a small stream often involves public transportation. This means that I have to carry _all_ my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. My working plan is to find a pair of lightweight wading boots that do not absorb a lot of water, and therefore are as close to ordinary boots as possible after a day of fishing. Wearing the boots on the way to a stream, and on the stream with hip waders is of course no problem. What may turn out to be cumbersome is using the same boots on my way back home. The plan is to use the boots with waterproof, breathable socks (Sealskinz). What I need to make sure is that the new wading boots - are faily good wading boots, naturally - are comfortable hiking boots - do not absorb a lot of water. I think that the local dealers carry the products from some major manufacturers - like Simms, Weinbrenner and Orvis - but not from all the manufacturers that you have. However, I can of course order anything on the net. My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html However, I would have to order these boots without seeing them, so I don't know whether they're good for what I'm looking for. There might also be other boots out there that I'm not aware of. Or maybe my approach is wrong - or doomed. I would really appreciate your input on this. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
I would not recommend Simms boots. I have the light pair and after two
seasons have worn the boots out. Not the soles, but rather the "pleather" reiforncements on the sides of the boots. I do not but would like to own a pair of Chotas. The Orivs convertable boots look (and feel) solid and changing soles for walking seems easy. "Jarmo Hurri" wrote in message ... I have a somewhat specialized boot selection problem, perhaps you can help me out. For me, traveling to a small stream often involves public transportation. This means that I have to carry _all_ my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. My working plan is to find a pair of lightweight wading boots that do not absorb a lot of water, and therefore are as close to ordinary boots as possible after a day of fishing. Wearing the boots on the way to a stream, and on the stream with hip waders is of course no problem. What may turn out to be cumbersome is using the same boots on my way back home. The plan is to use the boots with waterproof, breathable socks (Sealskinz). What I need to make sure is that the new wading boots - are faily good wading boots, naturally - are comfortable hiking boots - do not absorb a lot of water. I think that the local dealers carry the products from some major manufacturers - like Simms, Weinbrenner and Orvis - but not from all the manufacturers that you have. However, I can of course order anything on the net. My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html However, I would have to order these boots without seeing them, so I don't know whether they're good for what I'm looking for. There might also be other boots out there that I'm not aware of. Or maybe my approach is wrong - or doomed. I would really appreciate your input on this. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
On Sat, 20 Nov 2004 23:33:41 +0200, Jarmo Hurri
wrote: I've dealt with a similar problem hiking in and out of the Niagara River gorge. I've been using studded Weinbrenners (you might want to dispense with the studs) and I used them as hiking boots when dry and wet. I'd keep a pair of dry Bare 2mm neoprene socks. Hike down in them, remove the neoprene socks, and then suit up in my waders. When the day is done, remove the waders and put back on the dry neoprene socks and hike back up in my wet wading boots while my feet stay dry and warm. Peter turn mailhot into hotmail to reply Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html |
Wading boot selection problem
On Sat, 20 Nov 2004 23:33:41 +0200, Jarmo Hurri
wrote: I've dealt with a similar problem hiking in and out of the Niagara River gorge. I've been using studded Weinbrenners (you might want to dispense with the studs) and I used them as hiking boots when dry and wet. I'd keep a pair of dry Bare 2mm neoprene socks. Hike down in them, remove the neoprene socks, and then suit up in my waders. When the day is done, remove the waders and put back on the dry neoprene socks and hike back up in my wet wading boots while my feet stay dry and warm. Peter turn mailhot into hotmail to reply Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html |
Wading boot selection problem
al wrote:
I would not recommend Simms boots. I have the light pair and after two seasons have worn the boots out. Not the soles, but rather the "pleather" reiforncements on the sides of the boots. I do not but would like to own a pair of Chotas. The Orivs convertable boots look (and feel) solid and changing soles for walking seems easy. I've never had the slightest problem with Simms boots, and I abuse the hell out of my boots. I have two pair. One is a pair of leather Guide boots with felt soles and carbide studs. They are extremely heavy duty and weigh too much for most of my fishing, which involves lots of hiking. The other pair is a lightweight boot with felt soles and removable studs, which are actually sheet metal screws. The removable studs aren't nearly as good as carbide studs, but the advantage is that they can be removed if, for example, I want to wear them in a nice drift boat like John Hightower's. The problem with felt soles is that they don't wear well. My next pair will be lightweight Simms boots with Aquastealth soles and carbide studs. I'll use my current lightweight boots, with the studs removed, for that purpose in the future. -- Cut "to the chase" for my email address. |
Wading boot selection problem
On Sun, 21 Nov 2004 01:29:00 GMT, rw
wrote: al wrote: I would not recommend Simms boots. I have the light pair and after two seasons have worn the boots out. Not the soles, but rather the "pleather" reiforncements on the sides of the boots. I do not but would like to own a pair of Chotas. The Orivs convertable boots look (and feel) solid and changing soles for walking seems easy. I've never had the slightest problem with Simms boots, and I abuse the hell out of my boots. I have two pair. One is a pair of leather Guide boots with felt soles and carbide studs. They are extremely heavy duty and weigh too much for most of my fishing, which involves lots of hiking. The other pair is a lightweight boot with felt soles and removable studs, which are actually sheet metal screws. The removable studs aren't nearly as good as carbide studs, but the advantage is that they can be removed if, for example, I want to wear them in a nice drift boat like John Hightower's. The problem with felt soles is that they don't wear well. My next pair will be lightweight Simms boots with Aquastealth soles and carbide studs. I'll use my current lightweight boots, with the studs removed, for that purpose in the future. The soles on my first pair of studded Weinbrenners lasted 9 years. The uppers gave out before the soles. I'd average 40 to 50 trips a year, and yes, I did hike in them. Peter turn mailhot into hotmail to reply Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html |
Wading boot selection problem
"Jarmo Hurri" wrote in message ... My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html I own these boots, and can recommend them only if you are careful to inspect the spiked felt soles. I've had two of their felt spiked soles come apart after one or two days of fishing. The idea is workable, but they cannot seem to get the gluing process to last. I noticed the carbide rubber soles now are riveted to the harder plastic. Perhaps they will do that with the felt soles as well. Both soles were replaced without cost, but at a loss of valuable fishing time. I have changed soles on the river to save a friends drift boot from cleat damage, and have not had the felt come lose from the hard plastic. I do think their felt clogs more easily, and so does not have the same grip as my Chotas. I've been told to rinse off the felt to help sustain the stickiness. There are trade offs with this changeable sole model. |
Wading boot selection problem
"Jarmo Hurri" wrote in message ... My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html I own these boots, and can recommend them only if you are careful to inspect the spiked felt soles. I've had two of their felt spiked soles come apart after one or two days of fishing. The idea is workable, but they cannot seem to get the gluing process to last. I noticed the carbide rubber soles now are riveted to the harder plastic. Perhaps they will do that with the felt soles as well. Both soles were replaced without cost, but at a loss of valuable fishing time. I have changed soles on the river to save a friends drift boot from cleat damage, and have not had the felt come lose from the hard plastic. I do think their felt clogs more easily, and so does not have the same grip as my Chotas. I've been told to rinse off the felt to help sustain the stickiness. There are trade offs with this changeable sole model. |
Wading boot selection problem
Jarmo Hurri wrote:
I have a somewhat specialized boot selection problem, perhaps you can help me out. For me, traveling to a small stream often involves public transportation. This means that I have to carry all my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. My working plan is to find a pair of lightweight wading boots that do not absorb a lot of water, and therefore are as close to ordinary boots as possible after a day of fishing. Wearing the boots on the way to a stream, and on the stream with hip waders is of course no problem. What may turn out to be cumbersome is using the same boots on my way back home. The plan is to use the boots with waterproof, breathable socks (Sealskinz). What I need to make sure is that the new wading boots - are faily good wading boots, naturally - are comfortable hiking boots - do not absorb a lot of water. I think that the local dealers carry the products from some major manufacturers - like Simms, Weinbrenner and Orvis - but not from all the manufacturers that you have. However, I can of course order anything on the net. My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html However, I would have to order these boots without seeing them, so I don't know whether they're good for what I'm looking for. There might also be other boots out there that I'm not aware of. Or maybe my approach is wrong - or doomed. I would really appreciate your input on this. Jarmo, I've not tried the Korkers, but have the Orvis boots which might be equivalent, the Henry's Fork Convertibles. They have been very good for me, and I do a lot of hiking in wearing just these boots, then putting on the waders at the stream, and then the shoes again coming back. The other method, which a cheapo relative of mine uses is what Pat McManus called "Tenner shoes" - high top tennis shoes. The idea is to get a very cheap (the word disposable comes to mind, except for my environmental bent) pair of waders - and then wear sneakers over the top while in the water...Cheap, but I have been entertained by some neat action - sneakers don't have good "non-slip" capabilities. Maybe he'll work out a removable studded pair of rubbers for his tenners someday. Bill C -- reverse domain to reply |
Wading boot selection problem
Jarmo Hurri wrote:
I have a somewhat specialized boot selection problem, perhaps you can help me out. For me, traveling to a small stream often involves public transportation. This means that I have to carry all my gear with me, during transportation and during fishing. Having two sets of boots is too much bulk. I need to find a pair of boots which I can use both on my way to the stream, on the stream, and on my way back. My working plan is to find a pair of lightweight wading boots that do not absorb a lot of water, and therefore are as close to ordinary boots as possible after a day of fishing. Wearing the boots on the way to a stream, and on the stream with hip waders is of course no problem. What may turn out to be cumbersome is using the same boots on my way back home. The plan is to use the boots with waterproof, breathable socks (Sealskinz). What I need to make sure is that the new wading boots - are faily good wading boots, naturally - are comfortable hiking boots - do not absorb a lot of water. I think that the local dealers carry the products from some major manufacturers - like Simms, Weinbrenner and Orvis - but not from all the manufacturers that you have. However, I can of course order anything on the net. My current candidates are Korkers Outfitter convertible boots, since I could use hiking soles on my way to a stream and felt soles on the stream. http://www.korkers.com/product%20page/7500wkg.html However, I would have to order these boots without seeing them, so I don't know whether they're good for what I'm looking for. There might also be other boots out there that I'm not aware of. Or maybe my approach is wrong - or doomed. I would really appreciate your input on this. Jarmo, I've not tried the Korkers, but have the Orvis boots which might be equivalent, the Henry's Fork Convertibles. They have been very good for me, and I do a lot of hiking in wearing just these boots, then putting on the waders at the stream, and then the shoes again coming back. The other method, which a cheapo relative of mine uses is what Pat McManus called "Tenner shoes" - high top tennis shoes. The idea is to get a very cheap (the word disposable comes to mind, except for my environmental bent) pair of waders - and then wear sneakers over the top while in the water...Cheap, but I have been entertained by some neat action - sneakers don't have good "non-slip" capabilities. Maybe he'll work out a removable studded pair of rubbers for his tenners someday. Bill C -- reverse domain to reply |
Wading boot selection problem
Bill I've not tried the Korkers, but have the Orvis boots which might Bill be equivalent, the Henry's Fork Convertibles. They have been Bill very good for me, and I do a lot of hiking in wearing just these Bill boots, then putting on the waders at the stream, and then the Bill shoes again coming back. Hi Bill, These look like nice boots. I have one question though: can these be used without any of the listed soles? I am asking this because the boots seem to have felt soles, studded felt soles and studded rubber soles, but for getting to the stream (using public transportation) ordinary rubber soles without studs would be preferred. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
Bill I've not tried the Korkers, but have the Orvis boots which might Bill be equivalent, the Henry's Fork Convertibles. They have been Bill very good for me, and I do a lot of hiking in wearing just these Bill boots, then putting on the waders at the stream, and then the Bill shoes again coming back. Hi Bill, These look like nice boots. I have one question though: can these be used without any of the listed soles? I am asking this because the boots seem to have felt soles, studded felt soles and studded rubber soles, but for getting to the stream (using public transportation) ordinary rubber soles without studs would be preferred. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
bugcaster I own these boots, and can recommend them only if you are bugcaster careful to inspect the spiked felt soles. I've had two of bugcaster their felt spiked soles come apart after one or two days of bugcaster fishing. I don't think that's a problem, since spiked felt soles are not on the menu. My ordinary wading boots are Simms boots with studs, and I think that the studs make too much noise in small-stream fishing. bugcaster I have changed soles on the river to save a friends drift bugcaster boot from cleat damage, and have not had the felt come lose bugcaster from the hard plastic. I do think their felt clogs more bugcaster easily, and so does not have the same grip as my Chotas. Which Chotas do you have? Maybe the "STL" Plus boots might be an option if I just used them without the cleats. I would also need to know how much water they absorb / how quickly they dry. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
bugcaster I own these boots, and can recommend them only if you are bugcaster careful to inspect the spiked felt soles. I've had two of bugcaster their felt spiked soles come apart after one or two days of bugcaster fishing. I don't think that's a problem, since spiked felt soles are not on the menu. My ordinary wading boots are Simms boots with studs, and I think that the studs make too much noise in small-stream fishing. bugcaster I have changed soles on the river to save a friends drift bugcaster boot from cleat damage, and have not had the felt come lose bugcaster from the hard plastic. I do think their felt clogs more bugcaster easily, and so does not have the same grip as my Chotas. Which Chotas do you have? Maybe the "STL" Plus boots might be an option if I just used them without the cleats. I would also need to know how much water they absorb / how quickly they dry. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
Peter I've dealt with a similar problem hiking in and out of the Peter Niagara River gorge. I've been using studded Weinbrenners (you Peter might want to dispense with the studs) and I used them as Peter hiking boots when dry and wet. I'd keep a pair of dry Bare 2mm Peter neoprene socks. Hike down in them, remove the neoprene socks, Peter and then suit up in my waders. When the day is done, remove Peter the waders and put back on the dry neoprene socks and hike back Peter up in my wet wading boots while my feet stay dry and warm. Yep, that's the kind of use I am thinking of. And like you assumed, I don't want studs. And I'd like to avoid felt too, if possible, if the sole is non-changeable: felt gathers unnecessary dirt and water for the return travel. But I did just notice that Weinbrenner has a boot model with a synthetic, probably rubber-like sole: http://www.wadingshoes.com/wading/8617015.html The question remains: how much water do these boots absorb and how quickly do they dry? -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
rw My next pair will be lightweight Simms boots with Aquastealth rw soles and carbide studs. This is an option for me too, assuming that Simms marketing hype "quick-drying" is actually true. Although the convertible cleat system would be unnecessary in my case (assuming that AquaStealth provides enough fraction on its own). -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
rw My next pair will be lightweight Simms boots with Aquastealth rw soles and carbide studs. This is an option for me too, assuming that Simms marketing hype "quick-drying" is actually true. Although the convertible cleat system would be unnecessary in my case (assuming that AquaStealth provides enough fraction on its own). -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
Don But moccasins offer no support to the foot, if you need that to Don walk a long distance. I think that with my sense of balance, I need both foot and ankle support. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
Don But moccasins offer no support to the foot, if you need that to Don walk a long distance. I think that with my sense of balance, I need both foot and ankle support. -- Jarmo Hurri Commercial email countermeasures included in header email address. Remove all garbage from header email address when replying, or just use . |
Wading boot selection problem
On Sun, 21 Nov 2004 16:10:17 +0200, Jarmo Hurri
wrote: Peter I've dealt with a similar problem hiking in and out of the Peter Niagara River gorge. I've been using studded Weinbrenners (you Peter might want to dispense with the studs) and I used them as Peter hiking boots when dry and wet. I'd keep a pair of dry Bare 2mm Peter neoprene socks. Hike down in them, remove the neoprene socks, Peter and then suit up in my waders. When the day is done, remove Peter the waders and put back on the dry neoprene socks and hike back Peter up in my wet wading boots while my feet stay dry and warm. Yep, that's the kind of use I am thinking of. And like you assumed, I don't want studs. And I'd like to avoid felt too, if possible, if the sole is non-changeable: felt gathers unnecessary dirt and water for the return travel. But I did just notice that Weinbrenner has a boot model with a synthetic, probably rubber-like sole: http://www.wadingshoes.com/wading/8617015.html The question remains: how much water do these boots absorb and how quickly do they dry? The uppers dry fairly quickly, but not quickly enough that you could use them without the neoprene socks and still have dry feet. I drive in my studded Weinbrenners. The Grand is less than 15 minutes from my house so in cold weather, I get geared up in the garage. I've found that the felts don't pick up much dirt after they've been walked on dry land for a short. A trip over some grass they're almost clean. Peter turn mailhot into hotmail to reply Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html |
Wading boot selection problem
On Sun, 21 Nov 2004 16:10:17 +0200, Jarmo Hurri
wrote: Peter I've dealt with a similar problem hiking in and out of the Peter Niagara River gorge. I've been using studded Weinbrenners (you Peter might want to dispense with the studs) and I used them as Peter hiking boots when dry and wet. I'd keep a pair of dry Bare 2mm Peter neoprene socks. Hike down in them, remove the neoprene socks, Peter and then suit up in my waders. When the day is done, remove Peter the waders and put back on the dry neoprene socks and hike back Peter up in my wet wading boots while my feet stay dry and warm. Yep, that's the kind of use I am thinking of. And like you assumed, I don't want studs. And I'd like to avoid felt too, if possible, if the sole is non-changeable: felt gathers unnecessary dirt and water for the return travel. But I did just notice that Weinbrenner has a boot model with a synthetic, probably rubber-like sole: http://www.wadingshoes.com/wading/8617015.html The question remains: how much water do these boots absorb and how quickly do they dry? The uppers dry fairly quickly, but not quickly enough that you could use them without the neoprene socks and still have dry feet. I drive in my studded Weinbrenners. The Grand is less than 15 minutes from my house so in cold weather, I get geared up in the garage. I've found that the felts don't pick up much dirt after they've been walked on dry land for a short. A trip over some grass they're almost clean. Peter turn mailhot into hotmail to reply Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html |
Wading boot selection problem
"Jarmo Hurri" wrote in message ... Which Chotas do you have? Maybe the "STL" Plus boots might be an option if I just used them without the cleats. I would also need to know how much water they absorb / how quickly they dry. -- Jarmo Hurri Yes, I use the STL Plus. The only comment is that the heel is made of two pieces of felt, one glued to the first. The heel came off on stream (I'm hard on boots) and the factory replaced them, but the shipping was a drag. I do not have the cleats in them and the felt seems to stick better than the Korkers, and they are made with a fake leather that dries fairly quickly. They might be stitching the heels now, I'm not sure. |
Wading boot selection problem
"Jarmo Hurri" wrote in message ... Which Chotas do you have? Maybe the "STL" Plus boots might be an option if I just used them without the cleats. I would also need to know how much water they absorb / how quickly they dry. -- Jarmo Hurri Yes, I use the STL Plus. The only comment is that the heel is made of two pieces of felt, one glued to the first. The heel came off on stream (I'm hard on boots) and the factory replaced them, but the shipping was a drag. I do not have the cleats in them and the felt seems to stick better than the Korkers, and they are made with a fake leather that dries fairly quickly. They might be stitching the heels now, I'm not sure. |
Wading boot selection problem
Jarmo Hurri wrote:
Bill I've not tried the Korkers, but have the Orvis boots which might Bill be equivalent, the Henry's Fork Convertibles. They have been Bill very good for me, and I do a lot of hiking in wearing just these Bill boots, then putting on the waders at the stream, and then the Bill shoes again coming back. Hi Bill, These look like nice boots. I have one question though: can these be used without any of the listed soles? I am asking this because the boots seem to have felt soles, studded felt soles and studded rubber soles, but for getting to the stream (using public transportation) ordinary rubber soles without studs would be preferred. Hi Jarmo, The shoes come with a rubbery deal, with little rubber studs and are quite good for hiking, although the rubber "studs" quickly wear out on rocks etc. if you hike much (which is good for public transportation - they're just a flat rubber sole in a bit...). The thing I like is you can buy the felt and the studded felts separately, and you can even get replacement rubber soles if you like the rubber studs. I don't think I'd wear them without any of the inset soles,though, as you'd get crap in the little threaded holes that the inserts sit in. Bill -- reverse domain to reply |
Wading boot selection problem
Jarmo Hurri wrote:
Bill I've not tried the Korkers, but have the Orvis boots which might Bill be equivalent, the Henry's Fork Convertibles. They have been Bill very good for me, and I do a lot of hiking in wearing just these Bill boots, then putting on the waders at the stream, and then the Bill shoes again coming back. Hi Bill, These look like nice boots. I have one question though: can these be used without any of the listed soles? I am asking this because the boots seem to have felt soles, studded felt soles and studded rubber soles, but for getting to the stream (using public transportation) ordinary rubber soles without studs would be preferred. Hi Jarmo, The shoes come with a rubbery deal, with little rubber studs and are quite good for hiking, although the rubber "studs" quickly wear out on rocks etc. if you hike much (which is good for public transportation - they're just a flat rubber sole in a bit...). The thing I like is you can buy the felt and the studded felts separately, and you can even get replacement rubber soles if you like the rubber studs. I don't think I'd wear them without any of the inset soles,though, as you'd get crap in the little threaded holes that the inserts sit in. Bill -- reverse domain to reply |
All times are GMT +1. The time now is 10:50 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2006 FishingBanter