baitcaster
 

What would be a good baitcaster to start out on. I have used spinning
reels exclusively til now. thanks

baitcaster
 

"fishtale" wrote in message
ups.com...
What would be a good baitcaster to start out on. I have used spinning
reels exclusively til now. thanks

What kind of spinning reels do you use? Are you happy with that brand? If
not I personally would recommend
anything with the name ABU GARCIA written on it that is at least 10 years
old...The new stuff they are building is pure Sh*t! The older reels are
durable, smooth, and dependable. You can find them all over eBay @ a good
price as well.

baitcaster
 

"Damifino" wrote in message
...

"fishtale" wrote in message
ups.com...
What would be a good baitcaster to start out on. I have used spinning
reels exclusively til now. thanks

What kind of spinning reels do you use? Are you happy with that brand? If
not I personally would recommend
anything with the name ABU GARCIA written on it that is at least 10 years
old...The new stuff they are building is pure Sh*t! The older reels are
durable, smooth, and dependable. You can find them all over eBay @ a good
price as well.

I can't speak for the new Shimanos, but the 100B 200B and BSF models all
work very well. For a little less money I've got 4 new Quantum AC500CX
reels and one AC500PT that are rapidly becoming my main reels. Cool stuff.

The AC500CX has been on sale from Cabelas for a while.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com





--
Posted via a free Usenet account from http://www.teranews.com

baitcaster
 

The baitcaster reel that I will get will be a training reel. What
features should I get in a reel for this purpose Thanks.

baitcaster
 

"fishtale" wrote in message
oups.com...
The baitcaster reel that I will get will be a training reel. What
features should I get in a reel for this purpose Thanks.

LOL. I personally like mag brakes, and a much longer travel for spool
tension adjustment.

The spool tension is one of the reasons I am phasing out my Shimanos. They
tend to go from full tension to to free spool in less than a quarter turn.
It can very difficult to dial in when fishing light tackle.

The biggest reason I like mag brakes is because they are adjustable without
opening the reel.


I like a good flipping switch. The AC500CX has all that for a relatively
cheap price right now. If you like it and want to step up to some more
expensive stuff then you can get the PT models in stead of the CX models
for a few more dollars to fill your arsenal.

If you want to try something cheaper and don't mind opening up the reel to
adjust your brakes then the Bass Pro Shops MT 1000 H is not bad. Its not as
good as either the Shimanos or the Quantums I mentioned, but it would be a
fair reel to learn with. It would be cheaper. I have a couple of them that
I won at Yuma Bassmasters meetings. I use them once in a while, but mostly
they sit on the shelf now that I have better stuff. They are always good
for a quick mount up when I am trying out a new rod.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com



--
Posted via a free Usenet account from http://www.teranews.com

baitcaster
 

Is power pro 20lb okay to use on a baitcaster cause that is my
preferred line on my spinning reels. Also is a 7ft rod a good starter
rod for a baitcaster. Thanks

baitcaster
 

Thanks
I will definately look at the quantum reels since I don't want to open
up the reel to make adjustments. I do a lot of fishing and have no time
between casts to diddle with the reel.

Bob La Londe wrote:
"fishtale" wrote in message
oups.com...
The baitcaster reel that I will get will be a training reel. What
features should I get in a reel for this purpose Thanks.

LOL. I personally like mag brakes, and a much longer travel for spool
tension adjustment.

The spool tension is one of the reasons I am phasing out my Shimanos. They
tend to go from full tension to to free spool in less than a quarter turn.
It can very difficult to dial in when fishing light tackle.

The biggest reason I like mag brakes is because they are adjustable without
opening the reel.


I like a good flipping switch. The AC500CX has all that for a relatively
cheap price right now. If you like it and want to step up to some more
expensive stuff then you can get the PT models in stead of the CX models
for a few more dollars to fill your arsenal.

If you want to try something cheaper and don't mind opening up the reel to
adjust your brakes then the Bass Pro Shops MT 1000 H is not bad. Its not as
good as either the Shimanos or the Quantums I mentioned, but it would be a
fair reel to learn with. It would be cheaper. I have a couple of them that
I won at Yuma Bassmasters meetings. I use them once in a while, but mostly
they sit on the shelf now that I have better stuff. They are always good
for a quick mount up when I am trying out a new rod.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com



--
Posted via a free Usenet account from http://www.teranews.com

baitcaster
 

"fishtale" wrote in message
oups.com...
The baitcaster reel that I will get will be a training reel.

You can use it while you wear your training diapers Al...

Warren

baitcaster
 

Yes and yes. IMO if a line works good for you on a spinning reel you'll
have good luck with it on a baitcaster. A seven foot rod is a very good
choice - it's versatile. You'll have trouble casting lighter lures but if
you're using 20# test I'd guess you're not looking to cast 1/8 oz lures
either.


"fishtale" wrote in message
ups.com...
Is power pro 20lb okay to use on a baitcaster cause that is my
preferred line on my spinning reels. Also is a 7ft rod a good starter
rod for a baitcaster. Thanks

baitcaster
 

fishtale wrote:

What would be a good baitcaster to start out on. I have used spinning
reels exclusively til now. thanks


The Shimano Calais DC or Calcutta DC would be a good choice for you.

Dan

baitcaster
 

I tell you the problem with these designs of the month like Quatum puts
out... I bought 3 Quatum EX500 many years back and they were pretty
nice reels at the time. I noticed this year that the little magnetic
brakes were getting corroded and decided to replace them. I can not
find the part number available any where on the Internet. So I
replaced them all with Garcia 4600's, something I know I will always
be able to get parts for.

As a side note, I have a new neighbor building a house that repairs
reels for a living. Hopefully he will be able to tell me where to get
some new magnets or point me to a universal part that will work.

Don't get me wrong, I loved the reels and got 10 years or more out of
them, but I also thought I would be able to get parts when I needed
them. Part number QW330 btw if anybody has a source.

Cheers


Bob La Londe wrote:
"Damifino" wrote in message
...

"fishtale" wrote in message
ups.com...
What would be a good baitcaster to start out on. I have used spinning
reels exclusively til now. thanks

What kind of spinning reels do you use? Are you happy with that brand? If
not I personally would recommend
anything with the name ABU GARCIA written on it that is at least 10 years
old...The new stuff they are building is pure Sh*t! The older reels are
durable, smooth, and dependable. You can find them all over eBay @ a good
price as well.

I can't speak for the new Shimanos, but the 100B 200B and BSF models all
work very well. For a little less money I've got 4 new Quantum AC500CX
reels and one AC500PT that are rapidly becoming my main reels. Cool stuff.

The AC500CX has been on sale from Cabelas for a while.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com





--
Posted via a free Usenet account from http://www.teranews.com

baitcaster
 

Bob La Londe wrote:
"Damifino" wrote in message
The AC500CX has been on sale from Cabelas for a while.


I bought two of these recently and they are pretty good.

baitcaster
 

wrote in message
ups.com...
I tell you the problem with these designs of the month like Quatum puts
out... I bought 3 Quatum EX500 many years back and they were pretty
nice reels at the time. I noticed this year that the little magnetic
brakes were getting corroded and decided to replace them. I can not
find the part number available any where on the Internet.


Quantum is good about doing that. I have two quantum reels that they don't
even make parts for anymore....As far as parts for your reel we have a
local tackle store here that might can help....just e-mail
them..www.marksoutdoors.com

baitcaster
 

Could we have a comparison of a spinning reel to a baitcaster with all
aspects covered.
Thanks

baitcaster
 

"fishtale" wrote in message
ps.com...

Could we have a comparison of a spinning reel to a baitcaster with all
aspects covered.
Thanks

Trust me Al, you aren't ready for one.....
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com

baitcaster
 

Steve @ OutdoorFrontiers wrote:

"fishtale" wrote in message
ps.com...

Could we have a comparison of a spinning reel to a baitcaster with all
aspects covered.
Thanks


Trust me Al, you aren't ready for one.....

His keyboard is also missing a "?".

baitcaster
 

I know that a backlash results in the spool running faster than the
line feed. I'm not sure about what drag adjustment there is in a modern
baitcaster. The lure retrieve is 1:1 so that it is possible to get a
better grip on lure action .It can handle quite a variable size fish
and line tends not loop as in a spinning reel. Lot of pluses

baitcaster
 

Just stay away from a baitcaster AL, it will only lead you to post more on
here, but if you insist, try bank fishing and ask the nearest professional
athlete for his opinion
"fishtale" wrote in message
oups.com...

I know that a backlash results in the spool running faster than the
line feed. I'm not sure about what drag adjustment there is in a modern
baitcaster. The lure retrieve is 1:1 so that it is possible to get a
better grip on lure action .It can handle quite a variable size fish
and line tends not loop as in a spinning reel. Lot of pluses

baitcaster
 

Is it a better experience to land a fish with a baitcaster versus a
spinning reel? I'm definitely going the baitcaster route. Thanks

baitcaster
 

On 10 Oct 2006 18:41:51 -0700, "fishtale"
puked:


I know that a backlash results in the spool running faster than the
line feed. I'm not sure about what drag adjustment there is in a modern
baitcaster. The lure retrieve is 1:1 so that it is possible to get a
better grip on lure action .It can handle quite a variable size fish
and line tends not loop as in a spinning reel. Lot of pluses

I started using one around January and now I wouldn't go back to a
spinner. The best part is the ability to place your cast exactly
where you want to distance wise by stopping the cast with your thumb.

I spent a lot of time in my front yard practicing using some light
Spiderwire EZ Cast until I got reasonably proficient with it. I still
get bird's nests, especially when it starts getting dark.

And BTW, the retrieve is a ratio, like 6.4:1 or 5.something depending
on the model...
--
lab~rat :-)
Do you want polite or do you want sincere?

baitcaster
 

"lab~rat :-)" wrote in message SNIP

I started using one around January and now I wouldn't go back to a
spinner. The best part is the ability to place your cast exactly
where you want to distance wise by stopping the cast with your thumb.

I spent a lot of time in my front yard practicing using some light
Spiderwire EZ Cast until I got reasonably proficient with it. I still
get bird's nests, especially when it starts getting dark.

And BTW, the retrieve is a ratio, like 6.4:1 or 5.something depending
on the model...

One thing you have to remember is that rods and reels are simply tools for
fishing and just like all tools, each has a time and place, and that one
tool cannot be used to its best advantage under all circumstances. Just
like you wouldn't (at least I hope not) use a hammer to put in a screw, or
use a screwdriver to put in a nail (although I suppose you could), it
doesn't make sense to try to use a baitcast rig to throw an 1/8th oz. lure
in open water, or use a spinning rod around thick, tangled, heavy cover.

Baitcasting equipment is better suited to situations where heavier line
(greater than 14 pound test) is needed. Whether this is due to heavy cover,
heavy lures or the need to gain immediate control over a fish, baitcasting
equipment handles this type of situation better.

Spinning tackle is better used for light lures (1.4 oz. or less), light
lines (14 pound or less), more open (less tangle/snag infested) water, for
finesse presentations and for many livebait applications.

The ability to present a lure with pinpoint accuracy is one feature of
baitcasting, but I am able to present a small, lightweight lure within
inches of my target. All it takes is changing how you hold the spinning rod
and the educated use of your forefinger.

To say "I wouldn't go back to a spinner" is like leaving half your tools out
of the toolbox when you're doing a job. I have 12 spinning rods and 12
baitcast rigs in my boat and you'll see both types of tackle on the deck of
my boat anytime I'm out fishing.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com

baitcaster
 

On Thu, 12 Oct 2006 09:35:48 -0500, "Steve @ OutdoorFrontiers"
puked:


"lab~rat :-)" wrote in message SNIP

I started using one around January and now I wouldn't go back to a
spinner. The best part is the ability to place your cast exactly
where you want to distance wise by stopping the cast with your thumb.

I spent a lot of time in my front yard practicing using some light
Spiderwire EZ Cast until I got reasonably proficient with it. I still
get bird's nests, especially when it starts getting dark.

And BTW, the retrieve is a ratio, like 6.4:1 or 5.something depending
on the model...

One thing you have to remember is that rods and reels are simply tools for
fishing and just like all tools, each has a time and place, and that one
tool cannot be used to its best advantage under all circumstances. Just
like you wouldn't (at least I hope not) use a hammer to put in a screw, or
use a screwdriver to put in a nail (although I suppose you could), it
doesn't make sense to try to use a baitcast rig to throw an 1/8th oz. lure
in open water, or use a spinning rod around thick, tangled, heavy cover.

Baitcasting equipment is better suited to situations where heavier line
(greater than 14 pound test) is needed. Whether this is due to heavy cover,
heavy lures or the need to gain immediate control over a fish, baitcasting
equipment handles this type of situation better.

Spinning tackle is better used for light lures (1.4 oz. or less), light
lines (14 pound or less), more open (less tangle/snag infested) water, for
finesse presentations and for many livebait applications.

The ability to present a lure with pinpoint accuracy is one feature of
baitcasting, but I am able to present a small, lightweight lure within
inches of my target. All it takes is changing how you hold the spinning rod
and the educated use of your forefinger.

To say "I wouldn't go back to a spinner" is like leaving half your tools out
of the toolbox when you're doing a job. I have 12 spinning rods and 12
baitcast rigs in my boat and you'll see both types of tackle on the deck of
my boat anytime I'm out fishing.

That may be the case. Maybe I'm not experienced enough to pull out an
8 iron or a PW when the time comes, figuratively speaking, but when I
go back to spinners after using a baitcaster, I feel lost.

I fish mainly in the Fl. Everglades, and use only a pair of
baitcasters at this point, though my eye is open for another one. Ya
see, two rigs is just one short, if I only had ONE more... LOL
--
lab~rat :-)
Do you want polite or do you want sincere?