FishingBanter

FishingBanter (http://www.fishingbanter.com/index.php)
-   Bass Fishing (http://www.fishingbanter.com/forumdisplay.php?f=5)
-   -   Whats the best leader for braided lines? (http://www.fishingbanter.com/showthread.php?t=26659)

Zimmy June 11th, 2007 01:37 AM

Whats the best leader for braided lines?
 
I know everyone has their own opinion on this, but I'd lie to hear
about everyones expierences. I started useing braided superlines a
few years ago and haven't looked back. Currently, I keep all my rods
rigged with either grey or yellow Power Pro line. I especially love
the yellow line for throwing unweighted senkos, because I can detect
the strikes by watching the line. The only problem is, I firmly
believe the fish can see the line. I've been experimenting with
various leader materials. First I tried regular Stren mono, but I
didn't like that at all. Then I tried Berkley Vanish and that worked
pretty well in most situations. Next I tried P-Line flourocarbon, but
I didn't like it at all. This Year, I'm trying Suffix Seige. So far
it seems to work OK in some situations, but it seems to have poor
abrasion resistance.
For those of you out there that use super braids with leaders,
what do you like and why? TIA

Zimmy


Bob La Londe June 11th, 2007 03:23 AM

Whats the best leader for braided lines?
 
"Zimmy" wrote in message
ups.com...
I know everyone has their own opinion on this, but I'd lie to hear
about everyones expierences. I started useing braided superlines a
few years ago and haven't looked back. Currently, I keep all my rods
rigged with either grey or yellow Power Pro line. I especially love
the yellow line for throwing unweighted senkos, because I can detect
the strikes by watching the line. The only problem is, I firmly
believe the fish can see the line. I've been experimenting with
various leader materials. First I tried regular Stren mono, but I
didn't like that at all. Then I tried Berkley Vanish and that worked
pretty well in most situations. Next I tried P-Line flourocarbon, but
I didn't like it at all. This Year, I'm trying Suffix Seige. So far
it seems to work OK in some situations, but it seems to have poor
abrasion resistance.
For those of you out there that use super braids with leaders,
what do you like and why? TIA

Zimmy


I use braid striaght to the hook/bait in all conditions except gin clear
water. Then I switch to a Seaguar Carbon Pro flourocarbon. Usually in 12
lb. I may try Maxima Flourocarbon if I get a chance. I've got their 8lb on
my drop shot rod sand its pretty incredible stuff. My partner has 12lb
Maxima flourocarbon on his wacky senko rod and he says he likes it a lot.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com



--
Posted via a free Usenet account from http://www.teranews.com


johnval1 June 11th, 2007 12:11 PM

Whats the best leader for braided lines?
 
I do not use leaders on braid. I don't like the idea of adding another knot
to the equation. Most of my fishing is done in weedy areas a leader would
just give me a weak link in the system. When they take me down into the
weeds and start wrapping around the veg, a leader would just be like a get
out of jail free card.



Steve @ OutdoorFrontiers June 12th, 2007 02:32 PM

Whats the best leader for braided lines?
 

"Zimmy" wrote in message
ups.com...
I know everyone has their own opinion on this, but I'd lie to hear
about everyones expierences. I started useing braided superlines a
few years ago and haven't looked back. Currently, I keep all my rods
rigged with either grey or yellow Power Pro line. I especially love
the yellow line for throwing unweighted senkos, because I can detect
the strikes by watching the line. The only problem is, I firmly
believe the fish can see the line. I've been experimenting with
various leader materials. First I tried regular Stren mono, but I
didn't like that at all. Then I tried Berkley Vanish and that worked
pretty well in most situations. Next I tried P-Line flourocarbon, but
I didn't like it at all. This Year, I'm trying Suffix Seige. So far
it seems to work OK in some situations, but it seems to have poor
abrasion resistance.
For those of you out there that use super braids with leaders,
what do you like and why? TIA


I've been using braided line for years without ever attaching a leader and
haven't had a problem with fish eating the lure. Adding a leader simply
adds another connection point that has the potential for failure.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com



The Great Gazooka[_2_] June 15th, 2007 04:29 PM

Whats the best leader for braided lines?
 
On Tue, 12 Jun 2007 07:32:21 -0600, "Steve @ OutdoorFrontiers"
wrote:


"Zimmy" wrote in message
oups.com...
I know everyone has their own opinion on this, but I'd lie to hear
about everyones expierences. I started useing braided superlines a
few years ago and haven't looked back. Currently, I keep all my rods
rigged with either grey or yellow Power Pro line. I especially love
the yellow line for throwing unweighted senkos, because I can detect
the strikes by watching the line. The only problem is, I firmly
believe the fish can see the line. I've been experimenting with
various leader materials. First I tried regular Stren mono, but I
didn't like that at all. Then I tried Berkley Vanish and that worked
pretty well in most situations. Next I tried P-Line flourocarbon, but
I didn't like it at all. This Year, I'm trying Suffix Seige. So far
it seems to work OK in some situations, but it seems to have poor
abrasion resistance.
For those of you out there that use super braids with leaders,
what do you like and why? TIA


I've been using braided line for years without ever attaching a leader and
haven't had a problem with fish eating the lure. Adding a leader simply
adds another connection point that has the potential for failure.

Yeah.......and when you're serving bologna, make sure you include some
spam. By golly!!

Zimmy June 16th, 2007 10:23 AM

Whats the best leader for braided lines?
 
Bob,
Thanks, I'll have to try the Seaguar and the Maxima. I guess I
spent too much time flyfishing for trout as a kid, but I just don't
feel comfortable trying the braided lines direct to the hook/lure, but
then, I'm almost always fishing shallow water rangeing from stained to
gin clear, so I have always felt I get more bites when useing a clear
leader at least 5' long.

Zimmy

I use braid striaght to the hook/bait in all conditions except gin clear
water. Then I switch to a Seaguar Carbon Pro flourocarbon. Usually in 12
lb. I may try Maxima Flourocarbon if I get a chance. I've got their 8lb on
my drop shot rod sand its pretty incredible stuff. My partner has 12lb
Maxima flourocarbon on his wacky senko rod and he says he likes it a lot.

--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contestshttp://www.YumaBassMan.com



Joshuall June 26th, 2007 05:45 PM

Whats the best leader for braided lines?
 
Zimmy,

I use the same rig you do re a leader with most of my braids. I'm pretty
sure I'm using the new suffix floro. I add a dab of superglue to the knot
and I've never had a knot break on a set or while fighting a fish. I think
you're right, if you're fishing relatively clear water (like we do on Lake
Mich and some of it's tributaries) I think a leader is a must. Now it's hard
to measure negatives . . . unless you can actually see a fish reject the
offering and know it's because they saw the line, but I think it's a matter
of comfort and confidence. I like the combo, use it on a number of
applications and have no prob or concerns with the extra knot.



--
God Bless America

Josh The Bad Bear



Robert L Bass September 30th, 2007 09:33 AM

Whats the best leader for braided lines?
 
"johnval1" wrote:

I do not use leaders on braid. I don't like the idea of adding
another knot to the equation. Most of my fishing is done in weedy
areas a leader would just give me a weak link in the system. When
they take me down into the weeds and start wrapping around the veg,
a leader would just be like a get out of jail free card.


Pardon me if this has already been discussed. I'm getting ready for
a trip to Rio Unini in the Amazon. We're going after Peacock Bass.
I'm planning to use 65 lb braid (Power Pro). If I tie braid right to
the lure am I more likely to break the line or rod than with a
leader? I hear they fight like Tyson. :^)

Also, I've been trying various knots to tie the leader (12 lb mono)
to the braid with varying degrees of success. If you have any
suggestions about the best knot to withstand Peacock abuse I'd like
to hear it.

Thanks in advance.

--

Regards,
Robert L Bass

=============================
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================


Steve @ OutdoorFrontiers September 30th, 2007 11:38 AM

Whats the best leader for braided lines?
 

"Robert L Bass" wrote in message SNIP

Pardon me if this has already been discussed. I'm getting ready for a
trip to Rio Unini in the Amazon. We're going after Peacock Bass. I'm
planning to use 65 lb braid (Power Pro). If I tie braid right to the lure
am I more likely to break the line or rod than with a leader? I hear they
fight like Tyson. :^)

Also, I've been trying various knots to tie the leader (12 lb mono) to the
braid with varying degrees of success. If you have any suggestions about
the best knot to withstand Peacock abuse I'd like to hear it.

Thanks in advance.


Hello Robert,

While I don't have a lot of experience with peacock bass, having only fished
for them in Miami, I do have a fair amount of experience with 65 pound
PowerPro and with muskies, a large, hard hitting fish.

If you tie the line directly to the lure, you will stand the best chance to
land fish. I'm not a fan of using leaders, rarely finding fish to be leader
shy. However, whether you break the rod or the line is going to depend on
the rod you're using. I use 50 and 65 pound test on rods I've built using
St. Croix blanks. Their flipping stick and light muskie rods have held up
to the higher poundage lines pretty well. The best way to avoid rod
breakage is to set the drag so that there is a slight amount of slippage on
the hook set, then use your thumb on the spool to apply more pressure on the
fish if needed. I did blow up one rod using PowerPro, but I had the drag
cranked down as tight as possible and pulled a five pound bass out of the
water on a hook set.

I've done some experimenting and found the Uni-Uni knot to offer the best
strength for a connecting knot, but it works best when the leader line
diameter is the same as the PowerPro.

--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com


Robert L Bass October 1st, 2007 03:56 PM

Whats the best leader for braided lines?
 
"Steve @ OutdoorFrontiers" wrote in message
...

Pardon me if this has already been discussed. I'm getting ready
for a trip to Rio Unini in the Amazon. We're going after Peacock
Bass. I'm planning to use 65 lb braid (Power Pro). If I tie braid
right to the lure am I more likely to break the line or rod than
with a leader? I hear they fight like Tyson. :^)

Also, I've been trying various knots to tie the leader (12 lb
mono) to the braid with varying degrees of success. If you have
any suggestions about the best knot to withstand Peacock abuse I'd
like to hear it.

Thanks in advance.


Hello Robert,

While I don't have a lot of experience with peacock bass, having
only fished for them in Miami, I do have a fair amount of
experience with 65 pound PowerPro and with muskies, a large, hard
hitting fish.

If you tie the line directly to the lure, you will stand the best
chance to land fish. I'm not a fan of using leaders, rarely
finding fish to be leader shy. However, whether you break the rod
or the line is going to depend on the rod you're using. I use 50
and 65 pound test on rods I've built using St. Croix blanks. Their
flipping stick and light muskie rods have held up to the higher
poundage lines pretty well. The best way to avoid rod breakage is
to set the drag so that there is a slight amount of slippage on the
hook set, then use your thumb on the spool to apply more pressure
on the fish if needed. I did blow up one rod using PowerPro, but I
had the drag cranked down as tight as possible and pulled a five
pound bass out of the water on a hook set.


Thanks Steve,

That (no leader) seems to be the concensus so far. I'll try it. I
have one St. Croix rod. It's a Premier series, 7 foot, 2 piece. I
thought I'd bring two spinning rods and reels with me. The outfitter
has bait casting gear. Jerry from Highroller Lures (a good guy)
suggested when fishing shallow lagoons I alternate casts to the shore
line and the open area. He says he's caught big PB that way. Seems
sensible enough if the water is shallow. Your thoughts?

I've done some experimenting and found the Uni-Uni knot to offer
the best strength for a connecting knot, but it works best when the
leader line diameter is the same as the PowerPro.


I tried that knot after reading your post and you're right. It's
easier with same sized lines. I'll try working without a leader for
a while. Is the single Uni knot good for tying line to the lure or
is there a better one?

Thanks again for all the help.

--

Regards,
Robert L Bass

=============================
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================


Steve @ OutdoorFrontiers October 1st, 2007 04:05 PM

Whats the best leader for braided lines?
 

"Robert L Bass" wrote in message SNIP

Thanks Steve,

That (no leader) seems to be the concensus so far. I'll try it. I have
one St. Croix rod. It's a Premier series, 7 foot, 2 piece. I thought I'd
bring two spinning rods and reels with me. The outfitter has bait casting
gear. Jerry from Highroller Lures (a good guy) suggested when fishing
shallow lagoons I alternate casts to the shore line and the open area. He
says he's caught big PB that way. Seems sensible enough if the water is
shallow. Your thoughts?

I've done some experimenting and found the Uni-Uni knot to offer the best
strength for a connecting knot, but it works best when the leader line
diameter is the same as the PowerPro.


I tried that knot after reading your post and you're right. It's easier
with same sized lines. I'll try working without a leader for a while. Is
the single Uni knot good for tying line to the lure or is there a better
one?

Thanks again for all the help.


Hi Robert,

I'll have to defer to Jerry for the advice on Peacock Bass as my experience
is limited to two days in Miami. I would love to fish in South America for
them as I think they're an amazing fish and they'd be great as the star of
my tv show! It does make sense to throw occasionally to open water as I've
caught many nice muskies throwing to open water as another angler in the
boat was working the shoreline.

As far as knots for tying PowerPro to the lure, I use two depending upon the
size of the lure. I use an Improved Clinch knot with seven wraps of the tag
end around the mainline on large lures. If this knot hasn't slipped on a 36
pound muskie, I doubt a peacock bass will slip the knot either. For smaller
lures and single hooks, I use a Palomar Knot and it too hasn't slipped.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com


Bob La Londe October 1st, 2007 05:12 PM

Whats the best leader for braided lines?
 

"Steve @ OutdoorFrontiers" wrote in message
...

"Robert L Bass" wrote in message SNIP

Thanks Steve,

That (no leader) seems to be the concensus so far. I'll try it. I have
one St. Croix rod. It's a Premier series, 7 foot, 2 piece. I thought
I'd bring two spinning rods and reels with me. The outfitter has bait
casting gear. Jerry from Highroller Lures (a good guy) suggested when
fishing shallow lagoons I alternate casts to the shore line and the open
area. He says he's caught big PB that way. Seems sensible enough if the
water is shallow. Your thoughts?

I've done some experimenting and found the Uni-Uni knot to offer the
best strength for a connecting knot, but it works best when the leader
line diameter is the same as the PowerPro.


I tried that knot after reading your post and you're right. It's easier
with same sized lines. I'll try working without a leader for a while.
Is the single Uni knot good for tying line to the lure or is there a
better one?

Thanks again for all the help.


Hi Robert,

I'll have to defer to Jerry for the advice on Peacock Bass as my
experience is limited to two days in Miami. I would love to fish in South
America for them as I think they're an amazing fish and they'd be great as
the star of my tv show! It does make sense to throw occasionally to open
water as I've caught many nice muskies throwing to open water as another
angler in the boat was working the shoreline.

As far as knots for tying PowerPro to the lure, I use two depending upon
the size of the lure. I use an Improved Clinch knot with seven wraps of
the tag end around the mainline on large lures. If this knot hasn't
slipped on a 36 pound muskie, I doubt a peacock bass will slip the knot
either. For smaller lures and single hooks, I use a Palomar Knot and it
too hasn't slipped.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com



I personally don't care for the Palomar Knot, but thousands of anglers like
it. I actualyl use a Super Improved Clinch knot usually referred to as a
Trilene Knot and it works great. Just remeber to wet the (saliva works
great) with any knot prior to pulling the knot tight. Also, I'm suprised
nobofy has mentioend that Braid tends to slip on the spool of the reel if
its just tied directly onto the reel spool. I use a small amount of mono
filament backing, but others have mentioned putting a single wrap of duct
tape or frictin tape on the spool. Since I have mono laying around I do it
that way, and then I never have to worry about gunk from the tape making a
mess or getting places I don't want it on my reel.

http://www.yumabassman.com/#braid

Here is a little summary fo braid tips I wrote a while back. Its not etched
in stone, and I am sure Steve could add more with all his experience, but it
should have atleast one or two useful tidbits for you.

One more thing. I need to add to that list of tips. Pound test is pound
test. 10lb braid will break under roughly the same presures as ten pound
mono. In some circumstances it will break easier because it has no give and
no stretch to act as a shock absorber.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com



--
Posted via a free Usenet account from http://www.teranews.com


Steve @ OutdoorFrontiers October 1st, 2007 06:32 PM

Whats the best leader for braided lines?
 

"Bob La Londe" wrote in message SNIP

I personally don't care for the Palomar Knot, but thousands of anglers
like it. I actualyl use a Super Improved Clinch knot usually referred to
as a Trilene Knot and it works great. Just remeber to wet the (saliva
works great) with any knot prior to pulling the knot tight. Also, I'm
suprised nobofy has mentioend that Braid tends to slip on the spool of the
reel if its just tied directly onto the reel spool. I use a small amount
of mono filament backing, but others have mentioned putting a single wrap
of duct tape or frictin tape on the spool. Since I have mono laying
around I do it that way, and then I never have to worry about gunk from
the tape making a mess or getting places I don't want it on my reel.


***You're absolutely right, braid will slip on the spool. Unlike many, I
prefer not to use mono backing. I'd rather minimize the number of
connections between me and the fish, trusting one knot, but I'd rather not
trust two. I do use a 3/4" piece of electrical tape to secure the line to
the spool and that's eliminated any line slippage on the spool. I've tried
using mono backing in the past and if you cut and retie like you should, it
doesn't take long before you're casting the knot connecting the braid to the
mono. At that point, if a good fish hits on the end of a cast, you have to
worry if the backing line is good, what pound test is it and is the knot any
good? I'd rather not deal with that.

http://www.yumabassman.com/#braid

Here is a little summary fo braid tips I wrote a while back. Its not
etched in stone, and I am sure Steve could add more with all his
experience, but it should have atleast one or two useful tidbits for you.

One more thing. I need to add to that list of tips. Pound test is pound
test. 10lb braid will break under roughly the same presures as ten pound
mono. In some circumstances it will break easier because it has no give
and no stretch to act as a shock absorber.


***I agree with the statement "Pound test is pound test." While braid is
strong for it's diameter, 10 pound will still break. That's why it's
important to have a reel with a good drag, or know how to back reel a
spinning reel or thumb a spool.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com


Robert L Bass October 2nd, 2007 03:02 AM

Whats the best leader for braided lines?
 
"Bob La Londe" wrote:

I personally don't care for the Palomar Knot, but thousands of
anglers like it.


I think I know why. I tried it and it's easy to do even if the
boat's rocking. :^)

I actually use a Super Improved Clinch knot usually referred to as
a Trilene Knot and it works great. Just remeber to wet the (saliva
works great) with any knot prior to pulling the knot tight.


I tried the Trilene and, assuming I'm doing it right, it's a snap to
make. It looks as though it's strong.

Also, I'm suprised nobody has mentioned that Braid tends to slip on
the spool of the reel if it's just tied directly onto the reel
spool...


Thanks. I had heard that elsewhere. I have one bait casting reel
with 65 lb braid on it. There's about 10-20 yards of mono that the
store put on it before they added the braid. I tried pulling the
line with the drag locked way down and it doesn't move so I guess
it's alright. There's a similar arrangement on the spinning reel and
it seems OK too.

I use a small amount of mono filament backing, but others have
mentioned putting a single wrap of duct tape or frictin tape on the
spool. Since I have mono laying around I do it that way, and then
I never have to worry about gunk from the tape making a mess or
getting places I don't want it on my reel.


I saw someone mention using tape. I'm also a little leary of getting
adhesive into the works.

http://www.yumabassman.com/#braid


Nice website, Bob. Lots of good info. I sent you an email for
registration.

Here is a little summary of braid tips I wrote a while back. Its
not etched in stone, and I am sure Steve could add more with all
his experience, but it should have at least one or two useful
tidbits for you.

One more thing. I need to add to that list of tips. Pound test is
pound test. 10lb braid will break under roughly the same presures
as ten pound mono. In some circumstances it will break easier
because it has no give and no stretch to act as a shock absorber.


The "shock absorber" is why the salesman who loaded the line said to
use a leader. Sometimes this stuff seems more complicated than the
other "primate" stuff. :^) [private joke]

--

Regards,
Robert L Bass

=============================
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================


Bob La Londe October 2nd, 2007 03:57 AM

Whats the best leader for braided lines?
 
"Robert L Bass" wrote in message

Nice website, Bob. Lots of good info. I sent you an email for
registration.


Thanks. Saw your e-mail, but you still have to register before I can
activate the account.

The "shock absorber" is why the salesman who loaded the line said to use a
leader.


I'm not sure a short length of mono leader would have much positive affect
as a shock absorber. The only reason I could imagine for needing a leader
is for slow fishing presentations in ultra clear water. ie drop shotting
gin clear lakes, fishing minnows in clear ocaen water, etc.

Sometimes this stuff seems more complicated than the other "primate"
stuff. :^) [private joke]


Nah, primates can learn to fish just fine. Heck even some of the early
divergent dead end predators that evolved do ok at it.


--
Bob La Londe
Fishing Arizona & The Colorado River
Fishing Forums & Contests
http://www.YumaBassMan.com





--
Posted via a free Usenet account from http://www.teranews.com


Robert L Bass October 2nd, 2007 05:20 AM

Whats the best leader for braided lines?
 
"Bob La Londe" wrote:

Nice website, Bob. Lots of good info. I sent you an email for
registration.


Thanks. Saw your e-mail, but you still have to register before I
can activate the account.


OK, will do.

The "shock absorber" is why the salesman who loaded the line said
to use a leader.


I'm not sure a short length of mono leader would have much positive
affect as a shock absorber. The only reason I could imagine for
needing a leader is for slow fishing presentations in ultra clear
water. ie drop shotting gin clear lakes, fishing minnows in clear
ocaen water, etc.


Gotcha. I'll stick with braid to the lure and let you know how I
fare.

Sometimes this stuff seems more complicated than the other
"primate" stuff. :^) [private joke]


Nah, primates can learn to fish just fine. Heck even some of the
early divergent dead end predators that evolved do ok at it.


Brinks? :^)



All times are GMT +1. The time now is 05:59 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2006 FishingBanter