Stinger Teble Hook ???
 

http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear hook on
crank baits to a one size up Excalibur rotating hook, but this thing looks
interesting. If set up propery it should ride large point up for more boney
plate hook ups in the roof of the mouth. Thats the type of hook up I get
most of the time fishing stick worms wacky style, and I know how few fish I
lose that way, but you don't go for that kind of hammer blow hook set with a
crank bait. I have started training myself to set the hook by sweeping the
rod to one side while continuing to reel instead of a snap set, and it is
working, but this hook looks like it might lend itself to harrder hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear hook
on
crank baits to a one size up Excalibur rotating hook, but this thing looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I get
most of the time fishing stick worms wacky style, and I know how few fish
I
lose that way, but you don't go for that kind of hammer blow hook set with
a
crank bait. I have started training myself to set the hook by sweeping
the
rod to one side while continuing to reel instead of a snap set, and it is
working, but this hook looks like it might lend itself to harrder hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear hook
on
crank baits to a one size up Excalibur rotating hook, but this thing looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I get
most of the time fishing stick worms wacky style, and I know how few fish
I
lose that way, but you don't go for that kind of hammer blow hook set with
a
crank bait. I have started training myself to set the hook by sweeping
the
rod to one side while continuing to reel instead of a snap set, and it is
working, but this hook looks like it might lend itself to harrder hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

I rarely fish with live bait. However, if I did, this hook would be great
for fishing live shrimp for Specks and reds on the coasts! Thanks for
pointing it out. RichG TX

I rarely fish with live bait. However, if I did, this hook would be great
for fishing live shrimp for Specks and reds on the coasts! Thanks for
pointing it out. RichG TX

Ken- why not just add the treble to your existing hook as a trailer?

Warren

"Ken Blevins" wrote in message
...
Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear
hook
on
crank baits to a one size up Excalibur rotating hook, but this thing
looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I
get
most of the time fishing stick worms wacky style, and I know how few
fish
I
lose that way, but you don't go for that kind of hammer blow hook set
with
a
crank bait. I have started training myself to set the hook by sweeping
the
rod to one side while continuing to reel instead of a snap set, and it
is
working, but this hook looks like it might lend itself to harrder
hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

Ken- why not just add the treble to your existing hook as a trailer?

Warren

"Ken Blevins" wrote in message
...
Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear
hook
on
crank baits to a one size up Excalibur rotating hook, but this thing
looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I
get
most of the time fishing stick worms wacky style, and I know how few
fish
I
lose that way, but you don't go for that kind of hammer blow hook set
with
a
crank bait. I have started training myself to set the hook by sweeping
the
rod to one side while continuing to reel instead of a snap set, and it
is
working, but this hook looks like it might lend itself to harrder
hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

Hi Warren
I did in fact try that, but found that when working the bait through downed
trees and heavy log cover I got snagged a lot. I tried to position the
hook so that the barbs were all kinda pointing up but that didn't help
much.Tucking the treble hook in closer to the body of the lure seemed to
work better
Ken Blevins
"go-bassn" wrote in message
...
Ken- why not just add the treble to your existing hook as a trailer?

Warren

"Ken Blevins" wrote in message
...
Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because
of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear
hook
on
crank baits to a one size up Excalibur rotating hook, but this thing
looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I
get
most of the time fishing stick worms wacky style, and I know how few
fish
I
lose that way, but you don't go for that kind of hammer blow hook set
with
a
crank bait. I have started training myself to set the hook by sweeping
the
rod to one side while continuing to reel instead of a snap set, and it
is
working, but this hook looks like it might lend itself to harrder
hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

I hear you Ken, always go with what feels right for you.

Let me tell you about a trailer rigging that has made a heavy,
all-chartreuse SW spinnerbait with size 3 & 5 willowleaf blades a bait that
I'm landing 90% give or take of the smallies that even miss it bigtime.

Take your favorite regular trailer & use heavy-duty surgical tubing to cover
the eye. Then insert the bait's hook through the tubing & trailer eye.
This results in a rather rigid & adjustable connection between the two
hooks. The trailer should be adjusted so that it rides directly behind the
first hook, with the hook point below the skirt. One or two more hooks are
added inline behind the first, always alternating point direction up & down.

The finishing touch is a #2 treble added to the final trailer hook in the
same manner. I'm starting to believe that using all red hooks is drawing
extra strikes too.

This bait is heavy, no less than 3/4 oz, and is made exclusively to be
burned at rocket speed, just under the surface. Needless to say Ken, it's
not a lure to be thrown in any kind of cover. I'd never throw a
treble-hooked spinner in the stuff that you are; You're begging to get
snagged even with the treble as the main hook IMHO.

The clearer the water the better, and a very light chop is ideal, long casts
are prefferred. Burn it over cover, just under the surface, and you'll love
it when those bronzebacks rise up from the depths & crash the lure. It's
awesome.


Warren

http://www.warrenwolk.com
Http://www.tri-statebassmasters.com
2004 NJ B.A.S.S. Federation State Champions

"Ken Blevins" wrote in message
...
Hi Warren
I did in fact try that, but found that when working the bait through
downed trees and heavy log cover I got snagged a lot. I tried to
position the hook so that the barbs were all kinda pointing up but that
didn't help much.Tucking the treble hook in closer to the body of the lure
seemed to work better
Ken Blevins
"go-bassn" wrote in message
...
Ken- why not just add the treble to your existing hook as a trailer?

Warren

"Ken Blevins" wrote in message
...
Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I
cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because
of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear
hook
on
crank baits to a one size up Excalibur rotating hook, but this thing
looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I
get
most of the time fishing stick worms wacky style, and I know how few
fish
I
lose that way, but you don't go for that kind of hammer blow hook set
with
a
crank bait. I have started training myself to set the hook by
sweeping
the
rod to one side while continuing to reel instead of a snap set, and it
is
working, but this hook looks like it might lend itself to harrder
hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com

Good explanation, Warren. There are many times that we're throwing
spinnerbaits around rocky, windy points where adding a hook or two might
have made a big difference. Plenty of opportunities on Center Hill for that.

I seldom rig that way, because I am usually trying to toss my spinnerbaits
back into tangles and laydowns wherever I can find them. But for open water
points or fishing bass in the jumps, it would probably be a good idea for me
to keep a series of hooks like that on the deck, pre-made, so I just have to
slip the front hook onto the bait.

Another thing you can do to increase hookups, with either a single
spinnerbait hook or one rigged with a trailer, is to clip a small blade
attachment onto it like you might a plastic trailer. Put a plastic keeper
tab on first and then behind the hook to keep it in place. That spinning
blade right behind the hook, with a larger blade above it, seems to make the
fish zero in on the business end of the lure.

Joe
_________________
"go-bassn" wrote in message
...
I hear you Ken, always go with what feels right for you.

Let me tell you about a trailer rigging that has made a heavy,
all-chartreuse SW spinnerbait with size 3 & 5 willowleaf blades a bait that
I'm landing 90% give or take of the smallies that even miss it bigtime.

Take your favorite regular trailer & use heavy-duty surgical tubing to cover
the eye. Then insert the bait's hook through the tubing & trailer eye.
This results in a rather rigid & adjustable connection between the two
hooks. The trailer should be adjusted so that it rides directly behind the
first hook, with the hook point below the skirt. One or two more hooks are
added inline behind the first, always alternating point direction up & down.

The finishing touch is a #2 treble added to the final trailer hook in the
same manner. I'm starting to believe that using all red hooks is drawing
extra strikes too.

This bait is heavy, no less than 3/4 oz, and is made exclusively to be
burned at rocket speed, just under the surface. Needless to say Ken, it's
not a lure to be thrown in any kind of cover. I'd never throw a
treble-hooked spinner in the stuff that you are; You're begging to get
snagged even with the treble as the main hook IMHO.

The clearer the water the better, and a very light chop is ideal, long casts
are prefferred. Burn it over cover, just under the surface, and you'll love
it when those bronzebacks rise up from the depths & crash the lure. It's
awesome.


Warren

http://www.warrenwolk.com
Http://www.tri-statebassmasters.com
2004 NJ B.A.S.S. Federation State Champions

"Ken Blevins" wrote in message
...
Hi Warren
I did in fact try that, but found that when working the bait through
downed trees and heavy log cover I got snagged a lot. I tried to
position the hook so that the barbs were all kinda pointing up but that
didn't help much.Tucking the treble hook in closer to the body of the lure
seemed to work better
Ken Blevins
"go-bassn" wrote in message
...
Ken- why not just add the treble to your existing hook as a trailer?

Warren

"Ken Blevins" wrote in message
...
Bob
Last fall I lost a lot of fish on spinnerbaits ,so as an experiment I
cut
the hook off of two of my most productive colors, heated the shank and
installed a red treble hook ..My catch rate didn't improve [ because
of
the red hooks ] but my boating the fish went up slightly.
I hope to have a better idea of how well this works come spring
Ken Blevins
"Bob La Londe" wrote in message
...
http://image.basspro.com/images/imag...000/81069a.jpg

Anybody using this thing? I am torn. I have been switching my rear
hook
on
crank baits to a one size up Excalibur rotating hook, but this thing
looks
interesting. If set up propery it should ride large point up for more
boney
plate hook ups in the roof of the mouth. Thats the type of hook up I
get
most of the time fishing stick worms wacky style, and I know how few
fish
I
lose that way, but you don't go for that kind of hammer blow hook set
with
a
crank bait. I have started training myself to set the hook by
sweeping
the
rod to one side while continuing to reel instead of a snap set, and it
is
working, but this hook looks like it might lend itself to harrder
hookset.

--
** Public Fishing and Boating Forums
** www.YumaBassMan.com