FishingBanter

FishingBanter (http://www.fishingbanter.com/index.php)
-   Bass Fishing (http://www.fishingbanter.com/forumdisplay.php?f=5)
-   -   Motor problem (http://www.fishingbanter.com/showthread.php?t=2449)

big fish 2003 June 21st, 2004 12:15 AM

Motor problem
 
I have a 1997 Johnson 200 h.p Venom I was going fishing today, and while
driving to the lake I looked back and my motor was turned, I got out and
my motor tote was up and the tilt motor sounded like it was stuck on in
the up position, I disconnected the battery and the tilt motor was hot.
Does anyone know what this might be?


[email protected] June 21st, 2004 01:24 AM

Motor problem
 
Check each switch -- possible short or water / corrosion. Or it could
be stuck due to dirt.

In big fish 2003 wrote:
I have a 1997 Johnson 200 h.p Venom I was going fishing today, and
while driving to the lake I looked back and my motor was turned, I got
out and my motor tote was up and the tilt motor sounded like it was
stuck on in the up position, I disconnected the battery and the tilt
motor was hot. Does anyone know what this might be?



doS June 21st, 2004 01:41 AM

Motor problem
 
Common sense, the tilt was in the down position against the motor tot, the
tilt motor is porobably fried now.

"big fish 2003" wrote in message
...
I have a 1997 Johnson 200 h.p Venom I was going fishing today, and while
driving to the lake I looked back and my motor was turned, I got out and
my motor tote was up and the tilt motor sounded like it was stuck on in
the up position, I disconnected the battery and the tilt motor was hot.
Does anyone know what this might be?




Bob La Londe June 21st, 2004 02:37 AM

Motor problem
 

"doS" wrote in message
...
Common sense, the tilt was in the down position against the motor tot, the
tilt motor is porobably fried now.


If the motor was still trying when it was shut down its probably not fried.

Is there any chance a tilt switch somewhere on the boat was being held down
by a piece of equipment? I have a tilt switch on the bow, throttle lever,
and the side of the motor on my Baker. On My Skeeter there is one on the
front, back, and throttle.

A fishing pole or landing net laying on one might have done the trick for
you.


--
Public Fishing & Boating Forums
Fishing & Boating Link Index
www.YumaBassMan.com




"big fish 2003" wrote in message
...
I have a 1997 Johnson 200 h.p Venom I was going fishing today, and while
driving to the lake I looked back and my motor was turned, I got out and
my motor tote was up and the tilt motor sounded like it was stuck on in
the up position, I disconnected the battery and the tilt motor was hot.
Does anyone know what this might be?






big fish 2003 June 21st, 2004 03:38 AM

Motor problem
 
I just went out and checked the switch on the front deck, and yes a
fishing rod was pressing against the switch causing it to be held in the
up position. Thanks a million buddy.


Bob La Londe June 21st, 2004 04:23 AM

Motor problem
 
"big fish 2003" wrote in message
...
I just went out and checked the switch on the front deck, and yes a
fishing rod was pressing against the switch causing it to be held in the
up position. Thanks a million buddy.


Wow! I get to be right for once.

--
Public Fishing & Boating Forums
Fishing & Boating Link Index
www.YumaBassMan.com





All times are GMT +1. The time now is 10:32 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2006 FishingBanter