Lube instructions for a PTI Spinning reel
 

I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat, it
became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike

Lube instructions for a PTI Spinning reel
 

On Fri, 5 Sep 2008 11:58:20 -0400, "Mike Getz"
wrote:

I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat, it
became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike

I hate to make it sound simple...Did you try the quantum website???

Dan

Lube instructions for a PTI Spinning reel
 

did you try here?
http://www.quantumfishing.com/custsv...intenance.html

On Fri, 5 Sep 2008 11:58:20 -0400, "Mike Getz"
wrote:

I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat, it
became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike

Lube instructions for a PTI Spinning reel
 

Lube instructions for a PTI Spinning reel

Group: rec.outdoors.fishing.bass Date: Fri, Sep 5, 2008, 11:58am (CDT+1)
From: (Mike*Getz)
I dipped my Quantum Kinetic PTI in the lake while on my new pontoon
boat, it became very difficult to reel in, but was able to back reel and
rotate without any problems. It felt like there was a ton of goop in it,
I tried to tinker best I could mid lake with no luck, I re-dunked it and
it worked as good as before? I need to clean, grease and lube it and
don't have my booklet that came with, any help on where I can find this
info on the take apart and lube recommendations?
Thanks,
Mike

=======

Mike, I have several Quantum reels, and ocassionaly get them wet too.
Usually a good "shake" cures the sluggish reel problems for me. A quuck
"dunk" in the water should not require a re-lube job unless the reel is
due for one anyway. In that case, I just take mine to the local "reel
expert", and pay him a nominal fee to put it back in like new condition.
(I would rather go fishing than fool around with cleaning and lubing my
reels) :)

Just a thought........

John B

Lube instructions for a PTI Spinning reel
 

Thanks for the info fellas, I guess I was looking for take apart
instructions so I don't end up with leftover parts on the reassembly, I
think I'll take it in for a professional service, it's 2-3 years old and
never had a take apart cleaning.

Thanks again guys,
Mike



"Mike Getz" wrote in message
...
I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat,
it became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike

Lube instructions for a PTI Spinning reel
 

On Sat, 6 Sep 2008 12:46:31 -0400, "Mike Getz"
wrote:

Thanks for the info fellas, I guess I was looking for take apart
instructions so I don't end up with leftover parts on the reassembly, I
think I'll take it in for a professional service, it's 2-3 years old and
never had a take apart cleaning.

Thanks again guys,
Mike

Mike,
The thing to do with a "new" reel is to take it apart and replace all
the factory grease with less and better grease and oil in much smaller
amounts than the factory uses. Silicon grease in very small amounts
and extremely light oils or even auto tranny fluid. You may have to
clean and lube more often but performance will be increased enough to
make it worth learning how to do it. If you are afraid of not putting
it back together correctly, take digital pics of each step when you
disassemble it.

Dan





"Mike Getz" wrote in message
...
I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat,
it became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike

Lube instructions for a PTI Spinning reel
 

Go he
http://www.tackleservice.com/Consume...ctSeriesID=657
Click on the picture of your specific reel and you will see an exploded
parts diagram. It isn't step by step instructions, but maybe it will help?
Henry


Mike Getz wrote:
Thanks for the info fellas, I guess I was looking for take apart
instructions so I don't end up with leftover parts on the reassembly, I
think I'll take it in for a professional service, it's 2-3 years old and
never had a take apart cleaning.

Thanks again guys,
Mike



"Mike Getz" wrote in message
...
I dipped my Quantum Kinetic PTI in the lake while on my new pontoon boat,
it became very difficult to reel in, but was able to back reel and rotate
without any problems. It felt like there was a ton of goop in it, I tried
to tinker best I could mid lake with no luck, I re-dunked it and it worked
as good as before? I need to clean, grease and lube it and don't have my
booklet that came with, any help on where I can find this info on the take
apart and lube recommendations?

Thanks,
Mike