Joe Haubenreich wrote:

Try a black buzzbait, Randy. Attach a spinner blade behind the buzzprop to
slow it down to a crawl. You can probably straighten the bent wire behind
the prop, replace the rivet with a beat, and have enough to bend into a loop
to clip on an inline blade attachment. Be sure to use a trailer hook, too.

Joe
________________________________
I have a couple of buzz baits made like that - called Jumpin Jacks. They
were fairly popular a few years back around here. One difference was the
buzzbait blade was free moving - it was on a split ring, too, attached
to the upper arm.

Ronnie

http://fishing.about.com