Nate, you didn't mention it, but was the tube pulled down into the bend of
the hook, interfering with hook penetration? If so, you need a way to keep
the tube from sliding down and balling up on the hook.

The 4/0 hook was a good size; even a 3/0 should have done ok. Take a look at
the HP hook from Eagleclaw, which has a wire clip to hold the lure in place
on the strike.

The ball-jig or tapered tube jig with head inserted in the tube is another
good idea. If an exposed hook point is a problem, there are tapered jig
heads made for tubes that can be rigged as you did your T-rigged hook.

Joe
__________________
"NH" wrote in message
...
snip What should I have done differently? Bigger hook? Smaller weight?
Smaller tube? snip
Nate H.