Charles B. Summers wrote:

I agree!!! Had to strip three reels the other day and only took about 5
minutes!


The best line striper is made from a 16 Oz plastic drink bottle.

Here is how you make it

take the cap from the bottle, and drill a 1/4 inch hole in the center

Put a 1/4 inch by 1 inch bolt in the hole, from the inside out, put a
nut on the bolt and tighten. Screw the cap on a drink bottle, chuck the
bolt into your drill.

It takes less than 30 sec to strip a reel on to the bottle, when the
bottle is full toss it away, and use another bottle,, just keep the cap
in your tackle box, it will last for many, many years
--
Rodney Long,
Inventor of the Long Shot "WIGGLE" rig, SpecTastic Thread
Boomerang Fishing Pro. ,Stand Out Hooks ,Stand Out Lures,
Mojo's Rock Hopper & Rig Saver weights, Decoy Activator
and the EZKnot http://www.ezknot.com