![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
"Padishar Creel" wrote:
I have been into tube flies for a while now and I haven't seen many posts about tube flies. Anyone have some favorite patterns, hints on their use, or experiences to share? Chris Interesting you'd bring this up now. I'm in the process of tying some giant dahlberg divers and mudlers on tubes for pike. I use the tubes from Q-tips, and like the way they work. One of the problems I've run into is short strikes, and I think I'm going to try moving the hook further back in the fly just by putting an empty tube between the fly and the hook. I think I posted pictures of these flies a year ago, I tie them as large as I can with the longest deer hair I can find by tying in near the tips instead of in the middle. The resulting flies are just over 2 inches in diameter, and they really bring the big pike to the surface. I use large Octopus hooks instead of the usual long shank hooks because I think they get better hookups, and because they weigh less than the hook I'd need to tie these monsters in the usual way. Chas remove fly fish to reply http://home.comcast.net/~chas.wade/w...ome.html-.html San Juan Pictures at: http://home.comcast.net/~chasepike/wsb/index.html |
#2
|
|||
|
|||
![]()
Chas, I too use q-tips as well and some hobby tubing (I can make them longer
that way if I use the hobby tubing). The Octopus hooks are exactly what I have been using. I notice when I get a strike, the offset hook tends to release the tube better and the toothy devils don't eat up my flies as quickly. For the hookkeeper, I have found fuel line for hobby gas engines to be ideal (I used to use the material mentioned in the tube fly manual but you had to boil it to shrink it around the shank of the hook, with fuel line you don't have to). Also, I pack a bobbin threader, when on the water, to assist me in getting the leader thru the tube. I use the Palomar knot -- it gives it more bulk in the hook keeper (all this IMHO, of course). Chris "Chas Wade" wrote in message s.com... "Padishar Creel" wrote: I have been into tube flies for a while now and I haven't seen many posts about tube flies. Anyone have some favorite patterns, hints on their use, or experiences to share? Chris Interesting you'd bring this up now. I'm in the process of tying some giant dahlberg divers and mudlers on tubes for pike. I use the tubes from Q-tips, and like the way they work. One of the problems I've run into is short strikes, and I think I'm going to try moving the hook further back in the fly just by putting an empty tube between the fly and the hook. I think I posted pictures of these flies a year ago, I tie them as large as I can with the longest deer hair I can find by tying in near the tips instead of in the middle. The resulting flies are just over 2 inches in diameter, and they really bring the big pike to the surface. I use large Octopus hooks instead of the usual long shank hooks because I think they get better hookups, and because they weigh less than the hook I'd need to tie these monsters in the usual way. Chas remove fly fish to reply http://home.comcast.net/~chas.wade/w...ome.html-.html San Juan Pictures at: http://home.comcast.net/~chasepike/wsb/index.html |
#3
|
|||
|
|||
![]()
Most of my early season trolling is done with tube flies. Have a look at
some of my favorite patterns here-- http://southshoreflyfishing.com/tubes.html -- Regards, Jamie 8^) http://SouthShoreFlyFishing.Com "Padishar Creel" wrote in message ... Chas, I too use q-tips as well and some hobby tubing (I can make them longer that way if I use the hobby tubing). The Octopus hooks are exactly what I have been using. I notice when I get a strike, the offset hook tends to release the tube better and the toothy devils don't eat up my flies as quickly. For the hookkeeper, I have found fuel line for hobby gas engines to be ideal (I used to use the material mentioned in the tube fly manual but you had to boil it to shrink it around the shank of the hook, with fuel line you don't have to). Also, I pack a bobbin threader, when on the water, to assist me in getting the leader thru the tube. I use the Palomar knot -- it gives it more bulk in the hook keeper (all this IMHO, of course). Chris "Chas Wade" wrote in message s.com... "Padishar Creel" wrote: I have been into tube flies for a while now and I haven't seen many posts about tube flies. Anyone have some favorite patterns, hints on their use, or experiences to share? Chris Interesting you'd bring this up now. I'm in the process of tying some giant dahlberg divers and mudlers on tubes for pike. I use the tubes from Q-tips, and like the way they work. One of the problems I've run into is short strikes, and I think I'm going to try moving the hook further back in the fly just by putting an empty tube between the fly and the hook. I think I posted pictures of these flies a year ago, I tie them as large as I can with the longest deer hair I can find by tying in near the tips instead of in the middle. The resulting flies are just over 2 inches in diameter, and they really bring the big pike to the surface. I use large Octopus hooks instead of the usual long shank hooks because I think they get better hookups, and because they weigh less than the hook I'd need to tie these monsters in the usual way. Chas remove fly fish to reply http://home.comcast.net/~chas.wade/w...ome.html-.html San Juan Pictures at: http://home.comcast.net/~chasepike/wsb/index.html |
#4
|
|||
|
|||
![]()
I see that you dress the hook as well. I haven't done that and I can see it
makes a much nicer fly. Thanks for your response, you have some nice patterns on your website. Chris "Jamie Heim" wrote in message ... Most of my early season trolling is done with tube flies. Have a look at some of my favorite patterns here-- http://southshoreflyfishing.com/tubes.html -- Regards, Jamie 8^) http://SouthShoreFlyFishing.Com "Padishar Creel" wrote in message ... Chas, I too use q-tips as well and some hobby tubing (I can make them longer that way if I use the hobby tubing). The Octopus hooks are exactly what I have been using. I notice when I get a strike, the offset hook tends to release the tube better and the toothy devils don't eat up my flies as quickly. For the hookkeeper, I have found fuel line for hobby gas engines to be ideal (I used to use the material mentioned in the tube fly manual but you had to boil it to shrink it around the shank of the hook, with fuel line you don't have to). Also, I pack a bobbin threader, when on the water, to assist me in getting the leader thru the tube. I use the Palomar knot -- it gives it more bulk in the hook keeper (all this IMHO, of course). Chris "Chas Wade" wrote in message s.com... "Padishar Creel" wrote: I have been into tube flies for a while now and I haven't seen many posts about tube flies. Anyone have some favorite patterns, hints on their use, or experiences to share? Chris Interesting you'd bring this up now. I'm in the process of tying some giant dahlberg divers and mudlers on tubes for pike. I use the tubes from Q-tips, and like the way they work. One of the problems I've run into is short strikes, and I think I'm going to try moving the hook further back in the fly just by putting an empty tube between the fly and the hook. I think I posted pictures of these flies a year ago, I tie them as large as I can with the longest deer hair I can find by tying in near the tips instead of in the middle. The resulting flies are just over 2 inches in diameter, and they really bring the big pike to the surface. I use large Octopus hooks instead of the usual long shank hooks because I think they get better hookups, and because they weigh less than the hook I'd need to tie these monsters in the usual way. Chas remove fly fish to reply http://home.comcast.net/~chas.wade/w...ome.html-.html San Juan Pictures at: http://home.comcast.net/~chasepike/wsb/index.html |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does anyone tie or use tube flies? | Padishar Creel | Fly Fishing | 1 | May 24th, 2004 01:59 PM |
Does anyone tie or use tube flies? | Chas Wade | Fly Fishing | 16 | May 19th, 2004 07:26 AM |
Custom flies | Fintastic | Fly Fishing | 7 | January 13th, 2004 10:57 PM |
Channel Flies | Salmo Bytes | Fly Fishing Tying | 19 | December 23rd, 2003 09:14 PM |
Fly shop in Thailand (long0 | Joe McIntosh | Fly Fishing | 26 | December 8th, 2003 07:06 AM |