![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I was flipping through the April issue of Field and Stream the other
day and noticed an article about a guy that had created a lure from a beer bottle cap. So, this morning I figured I'd give it a try and create my own. I had a few Corona Light bottle caps lying around so I came up with this: http://www.flickr.com/photos/56301544@N00/10529829/ I took it out to the pond and, believe it or not, on my 3rd cast, I was reeling in a small bass (probably about 1 lb, maybe a tad more). Here's how I made mine. I took the cap and drilled a hole on each end - one for the swivel hook and one for the treble hook. I bent the cap and poured 3 BBs into it and used a clamp to squeeze it tight so it wouldn't open back up. Then just clipped the swivel hook and treble hooks on and I was done. I used a light spinning rod and reel to cast. |
#3
|
|||
|
|||
![]()
oh lord, we though Al lures were bad ;-)
"Dan, danl, danny boy, Redbeard, actually Greybeard now" wrote in message ... On 23 Apr 2005 10:20:23 -0700, sent into the ether: I was flipping through the April issue of Field and Stream the other day and noticed an article about a guy that had created a lure from a beer bottle cap. So, this morning I figured I'd give it a try and create my own. I had a few Corona Light bottle caps lying around so I came up with this: http://www.flickr.com/photos/56301544@N00/10529829/ I took it out to the pond and, believe it or not, on my 3rd cast, I was reeling in a small bass (probably about 1 lb, maybe a tad more). Here's how I made mine. I took the cap and drilled a hole on each end - one for the swivel hook and one for the treble hook. I bent the cap and poured 3 BBs into it and used a clamp to squeeze it tight so it wouldn't open back up. Then just clipped the swivel hook and treble hooks on and I was done. I used a light spinning rod and reel to cast. Well now you know if all that's left in the fridge is a Corona, you still have the makings of a fish fry :} Remove the x for e-mail reply www.outdoorfrontiers.com www.SecretWeaponLures.com A proud charter member of "PETAF", People for Eating Tasty Animals and Fish!!! |
#4
|
|||
|
|||
![]()
Bottle Cap Trapp?
wrote in message ups.com... I was flipping through the April issue of Field and Stream the other day and noticed an article about a guy that had created a lure from a beer bottle cap. So, this morning I figured I'd give it a try and create my own. I had a few Corona Light bottle caps lying around so I came up with this: http://www.flickr.com/photos/56301544@N00/10529829/ I took it out to the pond and, believe it or not, on my 3rd cast, I was reeling in a small bass (probably about 1 lb, maybe a tad more). Here's how I made mine. I took the cap and drilled a hole on each end - one for the swivel hook and one for the treble hook. I bent the cap and poured 3 BBs into it and used a clamp to squeeze it tight so it wouldn't open back up. Then just clipped the swivel hook and treble hooks on and I was done. I used a light spinning rod and reel to cast. |
#5
|
|||
|
|||
![]()
Buzz Bait?
wrote in message ups.com... I was flipping through the April issue of Field and Stream the other day and noticed an article about a guy that had created a lure from a beer bottle cap. So, this morning I figured I'd give it a try and create my own. I had a few Corona Light bottle caps lying around so I came up with this: http://www.flickr.com/photos/56301544@N00/10529829/ I took it out to the pond and, believe it or not, on my 3rd cast, I was reeling in a small bass (probably about 1 lb, maybe a tad more). Here's how I made mine. I took the cap and drilled a hole on each end - one for the swivel hook and one for the treble hook. I bent the cap and poured 3 BBs into it and used a clamp to squeeze it tight so it wouldn't open back up. Then just clipped the swivel hook and treble hooks on and I was done. I used a light spinning rod and reel to cast. |
#6
|
|||
|
|||
![]()
Maybe I'll try and use a Bass Ale cap next time.
|
#7
|
|||
|
|||
![]() |
#8
|
|||
|
|||
![]() |
#9
|
|||
|
|||
![]()
"Scott Seidman" wrote in message
.4... wrote in news:1114276823.856369.92670 @f14g2000cwb.googlegroups.com: I was flipping through the April issue of Field and Stream the other day and noticed an article about a guy that had created a lure from a beer bottle cap. Yup-- created, markets, and sells. He has some companies mad at him for trademark infringment, but he says he's only recycling the caps. Some breweries love the free advertising, and give him unused caps. Scott Yeah, I think Molson threatened him with a lawsuit. LOL Bob La Londe www.YumaBassMan.com |
#10
|
|||
|
|||
![]() "Scott Seidman" wrote in message .4... wrote in news:1114276823.856369.92670 @f14g2000cwb.googlegroups.com: I was flipping through the April issue of Field and Stream the other day and noticed an article about a guy that had created a lure from a beer bottle cap. Yup-- created, markets, and sells. He has some companies mad at him for trademark infringment, but he says he's only recycling the caps. Some breweries love the free advertising, and give him unused caps. Scott He said coors worked the best. I think I would rather drink from the septic tank . |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thin Mini Lures | American_Strength | General Discussion | 0 | May 15th, 2004 02:08 PM |
Pro's Choice Lures - A Product Review | Craig Baugher | Bass Fishing | 0 | April 19th, 2004 12:38 AM |
New brass body lures | Thin Mini Lures | Fly Fishing | 1 | April 13th, 2004 03:49 PM |
New ultra-thin brass body lures | Thin Mini Lures | Marketplace | 0 | April 13th, 2004 01:09 AM |
New ultra-thin brass body lures | Thin Mini Lures | General Discussion | 0 | April 13th, 2004 01:08 AM |