![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Say someone was going to sell off some unused equipment that's just sitting
around taking up some space right now. How would he ship them to the buyer to ensure that they arrived as pretty as the day they were shipped? I'm thinking about putting some of my over-abundance of fishing rods/reels on ebay... |
#2
|
|||
|
|||
![]()
Carpet tubes.
Joe ------------------------------- "Charles Summers" wrote in message . .. Say someone was going to sell off some unused equipment that's just sitting around taking up some space right now. How would he ship them to the buyer to ensure that they arrived as pretty as the day they were shipped? I'm thinking about putting some of my over-abundance of fishing rods/reels on ebay... |
#3
|
|||
|
|||
![]()
Ok here are a few suggestions
rods- pvc pipe reels and anything else- always insured, wrapped up good in bubble wrap and boxed and taped delivery confirmation on everything no matter how small. The minute you sell something of significant value on e-bay without insurance, it will be lost by the USPS. or without delivery confirmation, the person who gets the mail can claim he.she never received it. If you state in your ad that your not responsible for buyers who don't select to insure...guess what, you still are responsible to show that it was delivered. paypal will almost always side with the buyer, because they know the seller is screwed if he doesn't offer paypal as a method of payment and will most likely refund the money as opposed to shutting down his or her paypal account because they don't agree now on to the important stuff....what have you got and how much do you want for it? maybe i can save you a whole lot of time and energy -- WWW.GOTOBAITS.COM PREMIUM HAND POURED BAITS "Charles Summers" wrote in message . .. Say someone was going to sell off some unused equipment that's just sitting around taking up some space right now. How would he ship them to the buyer to ensure that they arrived as pretty as the day they were shipped? I'm thinking about putting some of my over-abundance of fishing rods/reels on ebay... |
#4
|
|||
|
|||
![]() "Charles Summers" wrote in message . .. Say someone was going to sell off some unused equipment that's just sitting around taking up some space right now. How would he ship them to the buyer to ensure that they arrived as pretty as the day they were shipped? I'm thinking about putting some of my over-abundance of fishing rods/reels on ebay... Charles, I have been shipping rods in carpet tubes for years now. They're cheap (usually free), easy to come by (most carpet dealers have piles of them) and best of all, they work. These things are almost 1/4" thick and withstand all but the most simian-like mail handler. I cut the tubes about 4-6 inches longer than the longest rod. I then wrap bubble wrap around the rods at both ends and one in the middle. I insert the rod into the carpet tube and plug the ends with more bubble wrap to protect the ends. Then I simply cut 12-16 inch duct tape strips and close off the ends by taping over the opening. I secure those pieces of tape with a couple wraps around the tube. I've sent hundreds of rods all over the country and only once did the U.S. Postal Service break the rods. On a side note, my brother in law is a driver for UPS. According to him, and verified by one of my sources at St. Croix, UPS "buys" more St. Croix rods than any single other source, including BassPro Shops or Cabela's! I ship rods via USPS and they get there just fine, and it costs less too. Insurance and proof of delivery is a must when shipping something like this. My normal shipping bill for a rod is normally around $25.00. What I want to know is "What in the heck is going on Charles?" First you sell your boat, now you're selling off an "over-abundance" of rods???? Let me tell you son, there ain't no such thing as an over-abundance of rods..... Unless you're dead or turning into some kind of rugby song material! -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#5
|
|||
|
|||
![]() "Steve @ OutdoorFrontiers" wrote in message ... What I want to know is "What in the heck is going on Charles?" First you sell your boat, now you're selling off an "over-abundance" of rods???? Let me tell you son, there ain't no such thing as an over-abundance of rods..... Unless you're dead or turning into some kind of rugby song material! -- Steve @ OutdoorFrontiers Thanks for the tip there Steve... What's going on? Well, I wasn't exactly going to get rid of "all" my rods, just a few that I usually never used much in the first place. Also, every damn time I plan on a fishing trip... this little thing called work gets in my way. I don't know what's changed here at work, but man... we've been slammed to no end! To top it all off, we failed a major inspection last year that was caused by a "bad" judgement call! Now, the frequency of the inspections has changed from a once in three year inspections, to a once a year inspection until we get our score back up. Usually, we scored superior in all phases of the building! I have one weekend out of three to do anything for myself, as it currently stands. If I didn't have sixteen years invested here... lol. Anyway... still looking for a jon boat. I know one of these days I'll get to pitch a worm again. |
#6
|
|||
|
|||
![]()
Oops... was suppose to be e-mailed, not send here.
|
#7
|
|||
|
|||
![]() "Charles Summers" wrote in message . .. Anyway... still looking for a jon boat. I know one of these days I'll get to pitch a worm again. I'm selling the Cobra (I bought from Steve). Not a jon boat but fast. The gas here on the lake is over $4.00/Gal. so I'm down sizing. I'll get another boat after the Cobra sells only smaller. In the mean time I'm doing all my fishing with the ODF (new motor now). Doc |
#8
|
|||
|
|||
![]()
The Cobra would store nicely in my driveway... if you're looking for
storage. " Bill & Sue" wrote in message ... "Charles Summers" wrote in message . .. Anyway... still looking for a jon boat. I know one of these days I'll get to pitch a worm again. I'm selling the Cobra (I bought from Steve). Not a jon boat but fast. The gas here on the lake is over $4.00/Gal. so I'm down sizing. I'll get another boat after the Cobra sells only smaller. In the mean time I'm doing all my fishing with the ODF (new motor now). Doc |
#9
|
|||
|
|||
![]()
On Fri, 29 Jun 2007 15:55:25 -0500, "Charles Summers"
wrote: The Cobra would store nicely in my driveway... if you're looking for storage. Doc And I'm sure Charles would make the engine staying in running order, and the batteries got exercised too....no extra charge.... Jim " Bill & Sue" wrote in message .. . "Charles Summers" wrote in message . .. Anyway... still looking for a jon boat. I know one of these days I'll get to pitch a worm again. I'm selling the Cobra (I bought from Steve). Not a jon boat but fast. The gas here on the lake is over $4.00/Gal. so I'm down sizing. I'll get another boat after the Cobra sells only smaller. In the mean time I'm doing all my fishing with the ODF (new motor now). Doc |
#10
|
|||
|
|||
![]()
On Sun, 24 Jun 2007 17:53:36 -0600, "Steve @ OutdoorFrontiers"
wrote: "Charles Summers" wrote in message ... Say someone was going to sell off some unused equipment that's just sitting around taking up some space right now. How would he ship them to the buyer to ensure that they arrived as pretty as the day they were shipped? I'm thinking about putting some of my over-abundance of fishing rods/reels on ebay... Charles, I have been shipping rods in carpet tubes for years now. They're cheap (usually free), easy to come by (most carpet dealers have piles of them) and best of all, they work. These things are almost 1/4" thick and withstand all but the most simian-like mail handler. I cut the tubes about 4-6 inches longer than the longest rod. I then wrap bubble wrap around the rods at both ends and one in the middle. I insert the rod into the carpet tube and plug the ends with more bubble wrap to protect the ends. Then I simply cut 12-16 inch duct tape strips and close off the ends by taping over the opening. I secure those pieces of tape with a couple wraps around the tube. I've sent hundreds of rods all over the country and only once did the U.S. Postal Service break the rods. On a side note, my brother in law is a driver for UPS. According to him, and verified by one of my sources at St. Croix, UPS "buys" more St. Croix rods than any single other source, including BassPro Shops or Cabela's! I ship rods via USPS and they get there just fine, and it costs less too. Insurance and proof of delivery is a must when shipping something like this. My normal shipping bill for a rod is normally around $25.00. What I want to know is "What in the heck is going on Charles?" First you sell your boat, now you're selling off an "over-abundance" of rods???? Let me tell you son, there ain't no such thing as an over-abundance of rods..... Unless you're dead or turning into some kind of rugby song material! By Golly........have you shipped any worms about the size of your weiner in old chap stick tubes, Stevie Spammer? By golly you sure are a good ol' spammer. Some of them worms are enormous!! Big enough to choke a huge brookie. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
shipping rods | doS | Bass Fishing | 6 | January 28th, 2006 12:35 AM |
Mail System Error - Returned Mail | Mail Administrator | UK Game Fishing | 0 | December 12th, 2003 04:40 AM |
Mail System Error - Returned Mail | Mail Administrator | UK Sea Fishing | 0 | December 8th, 2003 05:35 AM |
Mail System Error - Returned Mail | Mail Administrator | UK Sea Fishing | 0 | December 8th, 2003 05:35 AM |
Mail System Error - Returned Mail | Mail Administrator | UK Sea Fishing | 0 | December 7th, 2003 07:47 PM |