![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hello again gang,
I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Hole http://www.mainetackle.com |
#2
|
|||
|
|||
![]()
Sprattoo wrote:
Hello again gang, I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Hole http://www.mainetackle.com The main thing is weight distribution. This may be altered considerably by lowering the wing so that it is more or less parallel to the shank. Hooks are also important, as is the material used. Not all materials are buoyant, some are heavier than water when wet and flip the fly over. Hackles can be a particular problem, Older streamers were dressed with hackles which had fairly thick hollow buoyant stems ( quill), modern genetic hackles have thin dense heavy stems. One may obviate some of these problems by adding lead carefully to the hook shank, which once again makes the hook shank heavier than the dressing. This will also require wing position adjustment, if you use genetic hackles. TL MC |
#3
|
|||
|
|||
![]()
This will of course alter the action of the streamer. If possible, you
should obtain the right hackles. This will solve your problems immediately. Chinese or similar hackles are better than genetics, but are becoming increasingly diffcult to obtain. On many streamers, a small amount of lead wire added to the BUTT! of the stremer will prevent it flipping, but also alters the action. Using an underwing of bucktail will also solve the problem, ( Bucktail is buoyant), without altering the action of the streamer much, indeed it may well improve it, and prevent it flipping over. In this case you may also use genetic hackles on the wings. Lastly, the "flipping" action is sometimes highly desirable, as long as the fly rights itself when retrieved, as this is typical of the "flashing" behaviour displayed by many baitfish. TL MC |
#4
|
|||
|
|||
![]()
You might also find this of considerable interest;
http://globalflyfisher.com/streamers...k/martinek.htm TL MC |
#5
|
|||
|
|||
![]()
On Nov 3, 3:29 pm, Sprattoo wrote:
Hello again gang, I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Holehttp://www.mainetackle.com If they look good they most likely are good. The knot you tie them on with probably has more infulence than the "ballance" of the fly. If you tied them with every feather, and every hackle matched from side to side you might have the same problem. The length of the tag end of your knot is more influential than the "ballance: of the fly. Most flys don't really look like what they are supposed to imitate so who knows or cares as long as fish go for it. |
#6
|
|||
|
|||
![]()
On Nov 3, 9:36 pm, BJConner wrote:
On Nov 3, 3:29 pm, Sprattoo wrote: Hello again gang, I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Holehttp://www.mainetackle.com If they look good they most likely are good. The knot you tie them on with probably has more infulence than the "ballance" of the fly. If you tied them with every feather, and every hackle matched from side to side you might have the same problem. The length of the tag end of your knot is more influential than the "ballance: of the fly. Most flys don't really look like what they are supposed to imitate so who knows or cares as long as fish go for it. Thanks for all the tips.. and the link. i will certainly take a closer look at my knots before I dig deeply into the hackle issue. I think i have good supplies. I like to use rumf (since we are rumpf dealers) I have been giving my clinch knots some extra twists to keep them from slipping, maybe I should switch knots when fishing streamers? Lloyd M http://www.mainetackle.com |
#7
|
|||
|
|||
![]()
On 4 Nov, 05:01, Sprattoo wrote:
On Nov 3, 9:36 pm, BJConner wrote: On Nov 3, 3:29 pm, Sprattoo wrote: Hello again gang, I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Holehttp://www.mainetackle.com If they look good they most likely are good. The knot you tie them on with probably has more infulence than the "ballance" of the fly. If you tied them with every feather, and every hackle matched from side to side you might have the same problem. The length of the tag end of your knot is more influential than the "ballance: of the fly. Most flys don't really look like what they are supposed to imitate so who knows or cares as long as fish go for it. Thanks for all the tips.. and the link. i will certainly take a closer look at my knots before I dig deeply into the hackle issue. I think i have good supplies. I like to use rumf (since we are rumpf dealers) I have been giving my clinch knots some extra twists to keep them from slipping, maybe I should switch knots when fishing streamers? Lloyd Mhttp://www.mainetackle.com It is not a good idea to give extra twists to a clinch knot, it weakens the knot, and will not prevent it slipping. Use an improved clinch instead; http://www.mike-connor.homepage.t-on...s/leaders.html (scroll to bottom of page, the "improved clinch knot" is the same knot as the "tucked half blood knot". Quite a number of streamer dressers prefer straight eyed hooks for their streamers, and Keith Fulsher has this to say about it ; QUOTE In weighting a fly, I like to add the weight only to the forward part of the hook shank, primarily under the head. This keep the fly from riding upside down due to the added weight upsetting the natural hook balance and give the fly a little diving action as you swim it across the water in a series of darting motions. A 4X to 6X long straight eye hook is the best one to use because the straight eye acts as an extension of the head and the retrieve is not influenced by an up- or down-turned hook eye. UNQUOTE Others use various tricks to produce certain actions, but this too is an extensive and complex subject. Using the right hackles will make a big difference. TL MC |
#8
|
|||
|
|||
![]()
On Nov 3, 11:10 pm, Mike wrote:
On 4 Nov, 05:01, Sprattoo wrote: On Nov 3, 9:36 pm, BJConner wrote: On Nov 3, 3:29 pm, Sprattoo wrote: Hello again gang, I have been tying flies for quite a while and only just recently started tying them for sale in our shop. I have fished with TONS of tied flies from our tyers and seem to be having a problem I hope this group can help me solve. My tandem streamers fish great, and work perfectly, in fact I have had many compliments from old, weathered fishermen on them which is always nice. The problem I am having exactly is that some of my single hook streamers tend to roll over when fished. It seems that hydro dynamics and aerodynamics should work about the same, but in practice maybe not. It seems to me a streamer wing would naturally keep a fly upright when tied on top. Some flies work great and some don't at all. I don't want to be selling flies that roll belly up when fished. What exactly is it that makes a streamer that looks well tied, roll upside down when fished? I have copied the patterns of my tyers to the letter, and still seem to occasionally have this problem. The ones I have the hardest time with are patterns with multiple hackles on the wings. Grey ghosts and the like in particular. Patterns with only one or two hackles seem to stay upright. Are the feathers out-weighing the hook? Even if this is true why wont they right themselves when stripped in? Any help would be appreciated. Lloyd Metcalf The Fishin' Holehttp://www.mainetackle.com If they look good they most likely are good. The knot you tie them on with probably has more infulence than the "ballance" of the fly. If you tied them with every feather, and every hackle matched from side to side you might have the same problem. The length of the tag end of your knot is more influential than the "ballance: of the fly. Most flys don't really look like what they are supposed to imitate so who knows or cares as long as fish go for it. Thanks for all the tips.. and the link. i will certainly take a closer look at my knots before I dig deeply into the hackle issue. I think i have good supplies. I like to use rumf (since we are rumpf dealers) I have been giving my clinch knots some extra twists to keep them from slipping, maybe I should switch knots when fishing streamers? Lloyd Mhttp://www.mainetackle.com It is not a good idea to give extra twists to a clinch knot, it weakens the knot, and will not prevent it slipping. Use an improved clinch instead; http://www.mike-connor.homepage.t-on..._ups/Leaders/l... (scroll to bottom of page, the "improved clinch knot" is the same knot as the "tucked half blood knot". Quite a number of streamer dressers prefer straight eyed hooks for their streamers, and Keith Fulsher has this to say about it ; QUOTE In weighting a fly, I like to add the weight only to the forward part of the hook shank, primarily under the head. This keep the fly from riding upside down due to the added weight upsetting the natural hook balance and give the fly a little diving action as you swim it across the water in a series of darting motions. A 4X to 6X long straight eye hook is the best one to use because the straight eye acts as an extension of the head and the retrieve is not influenced by an up- or down-turned hook eye. UNQUOTE Others use various tricks to produce certain actions, but this too is an extensive and complex subject. Using the right hackles will make a big difference. TL MC I use an improved clinch, but was still having slipping problems. The only time i don't have that isue is when i put a double loop through the eye, then tie the improved clinch. This is only possible when the eye is big enough though. I was finding 5 twists on an improved clinch slipping regularly and incredibly frustrating. I was however, using a relatively light tippet (2-3lb test) something like a 4x I think. So maybe I should just suck it up and fish my streamers with more like a 3x or 2x at 6-8 lb test. Perhaps the heavier line would tie more securely. I was having to twist my improved clinches as many as 8 times to get a solid hold. I will try to us some thicker hackles, I found myself trying lighter and sparser hackles thinking they would work better, but if, as you say, the heavier hackles have more hollow fibers to make them more buoyant, that would make sense. |
#9
|
|||
|
|||
![]()
On 5 Nov, 03:00, Sprattoo wrote:
I use an improved clinch, but was still having slipping problems. The only time i don't have that isue is when i put a double loop through the eye, then tie the improved clinch. This is only possible when the eye is big enough though. I was finding 5 twists on an improved clinch slipping regularly and incredibly frustrating. I was however, using a relatively light tippet (2-3lb test) something like a 4x I think. So maybe I should just suck it up and fish my streamers with more like a 3x or 2x at 6-8 lb test. Perhaps the heavier line would tie more securely. I was having to twist my improved clinches as many as 8 times to get a solid hold. I will try to us some thicker hackles, I found myself trying lighter and sparser hackles thinking they would work better, but if, as you say, the heavier hackles have more hollow fibers to make them more buoyant, that would make sense. If you TWIST the clinch knot, it will fail, or slip. You have to WRAP the end of the line five times around the standing line ( on fine lines). I have never had such a knot slip. Lubricating the knot ( spit) is also important, as is drawing it slowly tight. If you use less than five turns on fine lines, up to about 8 lb breaking strain nylon, or twist the knot, instead of wrapping it, it will slip. If you use more turns, it weakens the knot. Also, if the diameter of the hook eye wire is a lot larger than the nylon diameter, ( as on some streamers when using fine tippet! ![]() then the improved clinch is not a good knot! I use the improved clinch more or less exclusively for attaching most of my flies and have done for over 45 years, but only with appropriate wire and nylon diameters. I have never had a problem with it. If you are not happy with it, there are some good alternatives, like this one; http://www.pechetruite.com/Noeuds/Davy-knot.htm Fishing streamers on fine tippet requires special tactics, a different knot to the clinch, and the right rod, as otherwise the tippet will break regularly, often at the knot itself. It is often better to use a loop to attach streamers. Like this one; http://www.pechetruite.com/Noeuds/Duncan-knot.htm The hackle stem on non-genetic hackles is much thicker and usually quite buoyant. The hackle fibres themselves have more barbules as well which are fairly buoyant. This varies a lot though. TL MC |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Streamers on full sinking lines | JR | Fly Fishing | 15 | February 15th, 2007 12:58 AM |
Extended body streamers? | pittendrigh | Fly Fishing Tying | 0 | December 2nd, 2006 11:29 PM |
Q's For Dying your own bucktail for streamers, and related materials | Neil | Fly Fishing | 4 | June 25th, 2005 06:12 PM |
Streamers | Mike Connor | Fly Fishing | 5 | October 9th, 2004 12:30 AM |
heavy metal streamers | [email protected] | Fly Fishing Tying | 0 | September 15th, 2004 11:48 PM |