![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() Hi everyone I have flyfishing for the past 15 years 8 as a kid 3 slow years and the last 4 I have tested my marriage to the fullest. Now I am ready to buy my first vise I got all the info I needed on what kind ect. I just don't know weather to get a peddistle base or C clamp. I know it's probably a matter of what works for you, but I couldn't find that much feedback on who l -- smittin My boss still thinks I'm crazy for trading saterday's off for tuesday ------------------------------------------------------------------------ smittin's Profile: http://www.njflyfishing.com/vBulleti...hp?userid=1001 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#2
|
|||
|
|||
![]()
On Fri, 16 May 2008 19:56:55 -0400, smittin
wrote: Hi everyone I have flyfishing for the past 15 years 8 as a kid 3 slow years and the last 4 I have tested my marriage to the fullest. Now I am ready to buy my first vise I got all the info I needed on what kind ect. I just don't know weather to get a peddistle base or C clamp. I know it's probably a matter of what works for you, but I couldn't find that much feedback on who l I have both, but I've always found it much more comfortable using my pedestal vise, as it doesn't have to be positioned at the edge of the tying bench, so I can easily rest my elbows on the bench surface when tying - something that would be awkward if even possible with a c-clamp model. The pedestal model also has no restriction on bench thickness as a c-clamp model may. I tie for both fresh and salt, and have never felt the pedestal vise was unstable, even when lashing 2/0 budgies with kevlar thread. But if I ever found it to be a problem, it would be no big deal to clamp the pedestal base to the bench with an inexpensive c-clamp... /daytripper |
#3
|
|||
|
|||
![]() I prefer the clamp, for the same reasons mentioned by irish1 and Akskim, but when travelling (espically camping) the pedestal can be very handy. Years ago, I found a chunk of cold rolled steel, in the scrap, under the cut-off saw of a machine shop. With a bit of drilling, tapping and, a thumb screw, it became a pedestal base suitable for tables too thick for the clamp on my old Thompson vice. -- Pete ------------------------------------------------------------------------ Pete's Profile: http://www.njflyfishing.com/vBulleti...php?userid=444 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#4
|
|||
|
|||
![]() Like the other's I use both a clamp and pedestal for my Traveler vise. I use the pedestal mostly when away from home, and clamp is much better for streamers and sal****er flies. As was pointed out if you really get into tying, you will spend alot of time at the vise, so be fore buying anything, decide on where you are going to be tying, height of table and chair, so you can get the better set up. Most better shops will let you try a vise before buying. Ramsey Outdoor, Shannon's, and Tightlines are your best bet. Good Luck. -- Stonefly Fishing or thinking about fishing... ------------------------------------------------------------------------ Stonefly's Profile: http://www.njflyfishing.com/vBulleti...hp?userid=2431 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#5
|
|||
|
|||
![]() Hey, I think you are going to find out that much of tying is personal preference and quirks. My tiny peice of advice is to get good tools and a good vice. Tying is expensive and cheap. The start up expense is fairly large, but the stuff lasts a lifetime. If you try to go too cheap, you'll wind up with alot of stuff you don't use much if at all. I have a Peak vice with pedestal. I believe a clamp is available for it. I like the pedestal cause my "bench" is an old typwriter table and the edge doesn't let you clamp very well. There you go a quirk. I tie mostly very small flys and thus haven't had any problem with the thing moving around. I like my rotary feature, but could get along without it. You also should consider the look of the vice and how much respect you will or will not get when you go to club ties or classes. Fly tying is addictive and very relaxing. I especially like trying new materials and variations on patterns. Have fun, Frogge. -- frogge Midge Master ------------------------------------------------------------------------ frogge's Profile: http://www.njflyfishing.com/vBulleti...hp?userid=1499 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#6
|
|||
|
|||
![]() frogge;114302 Wrote: You also should consider the look of the vice and how much respect you will or will not get when you go to club ties or classes. Fly tying is addictive and very relaxing. ... Have fun, Frogge. Frogge, I like the way you think. Please review my post concerning the thread monomaster.. Heck, I'll save you the time... -*After all I am very concerned about how I look... *- -*...just might not make the image that I wish to evoke. After all, it isn't how well you tie, its how you look while doing it. As always, I look marvelous. AK Skim!-- google_ad_section_end --*- -- AKSkim *.... Red Sox Nation *and the rest of MLB #1 in posts scrubbed, -161 and still counting.- -AK Skim NEFF leader in Off Topic Banter- *Winner of the NEFF 2007 Most Prestigious Award* ------------------------------------------------------------------------ AKSkim's Profile: http://www.njflyfishing.com/vBulleti...hp?userid=1171 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#7
|
|||
|
|||
![]() thanks guy's I did decide to go with the more expensive stuff just waiting for my birthday now so my wonderfull wife can think it was a $100 vise she bought me(lol my if my poor wife ever found out how much all my fly gear is worth she would be in shock). I installed a table in my basment with the c-clamp in mind so thats what I'm going with. I still am on the fence about which vise, but I think it's going to be the renzetti presentation 2000 i'ts like $270.00. Now that DRO is closed I don't have shop close by me and more than likely will not get to test before purchase. -- smittin My boss still thinks I'm crazy for trading saterday's off for tuesday ------------------------------------------------------------------------ smittin's Profile: http://www.njflyfishing.com/vBulleti...hp?userid=1001 View this thread: http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#8
|
|||
|
|||
![]()
On Fri, 16 May 2008 19:56:55 -0400, smittin
wrote: Hi everyone I have flyfishing for the past 15 years 8 as a kid 3 slow years and the last 4 I have tested my marriage to the fullest. Now I am ready to buy my first vise I got all the info I needed on what kind ect. I just don't know weather to get a peddistle base or C clamp. I know it's probably a matter of what works for you, but I couldn't find that much feedback on who l Before you invest a lot of money in an expensive vise, buy a good inexpensive one. All too often I have seen folks invest in good materials, tools, etc., only to drop out of tying. Give it a try with the simplest tools you can get. If the bug bites you, then you can invest in a better vise and better tools. I still have my old tools and vise and I have given away many other old tools and vises to newbies. I now tie with a Renzetti when I travel (both a base and a clamp - I prefer the base), and a permanently installed Nor Vise at home. The neat thing about a base vise is that you can tie with it *anywhere*, including the floor. I have been in cabins where there was no place to clamp a vise, so the base model came in quite handy. Dave |
#9
|
|||
|
|||
![]()
On May 16, 4:56*pm, smittin wrote:
Hi everyone I have flyfishing for the past 15 years 8 as a kid 3 slow years and the last 4 I have tested my marriage to the fullest. * Now I am ready to buy my first vise I got all the info I needed on what kind ect. *I just don't know weather to get a peddistle base or C clamp. *I know it's probably a matter of what works for you, but I couldn't find that much feedback on who l -- smittin My boss still thinks I'm crazy for trading saterday's off for tuesday ------------------------------------------------------------------------ smittin's Profile:http://www.njflyfishing.com/vBulleti...hp?userid=1001 View this thread:http://www.njflyfishing.com/vBulleti...ad.php?t=14770 ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----http://www.newsfeeds.comThe #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- I have a Renzetti Traveler (noncam) and used it for years. Last year I bought a DynaKing Barracuda and it has become my principle vice. It has noth a pedastal and c-clamp.So much easier to use. I would suggest Dyna King (Made in USA). I would suggest eBay as you may get a bargin. Either buy from a store there or get in an auction. My Traveler cost $86 and the Barracuda was $150 (both new). Good tying deserttrout |
#10
|
|||
|
|||
![]()
There are lots of good vises for sale, and at least one piece of high priced
junk. I don't think you can go wrong with anything except that piece of junk called Nor-Vise and their stupid bobbin. Avoid both like the plague! Good luck! John. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What Vise Do You Use | Frank Reid | Fly Fishing | 71 | July 6th, 2006 07:17 AM |
Looking for a new vise | Randy | Fly Fishing Tying | 4 | December 12th, 2005 06:27 AM |
New Vise | Frank Reid | Fly Fishing Tying | 2 | August 13th, 2005 11:20 PM |
looking for a new vise | Randy | Fly Fishing | 0 | June 25th, 2005 11:04 PM |
Looking for a new vise | Randy | Fly Fishing | 0 | June 25th, 2005 11:00 PM |