![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hello all,
Been lurking awhile and I see there are a few legitimate anglers in the crowd and a few with lot's of experience they're willing to share - so I'll wade on in and ask for some advice. First a little background so you'll know I'm a true novice but not exactly a newbie. Over the years, we have been fortunate to live in some of the most beautiful parts of the country and enjoyed many fishing and camping trips to places others may only ever read about. I was introduced to fly-fishing back in the 70's while we were living in Montana. Since we enjoyed the hiking, I got myself a 4 piece pack rod back that has the action of a 2x4 - but luck prevailed and quite a few native cutthroats ended up in the creel. Where we fished was typically densely covered streams in the mountains and using any method I could to get the fly - somewhere - in the water was used. Obviously I learned a lot of bad habits which were only compounded by trying to use spin casting skills on a fly rod. Luck continued on our trips into Nebraska waters and eventually on up to Alaska over the next few years. If you've ever fished the Russian river, you know that it generates its own wind and you darn near need a brick tied to the end of the tippet to get the line out in some places. Again, the same 4 piece rod was used but here, the stiff action was a plus but my skills were no match for the challenges offered. I often reverted back to a spinning outfit so I could concentrate more on fishing instead of trying to get my fly line untangled from a nearby tree. I now look back at those wonderful adventures (which I tell many a tall tale about today) and finally realized after all these years that the most enjoyable fishing I ever did was with that simple 4 piece fly rod. After we moved back east, I gave that rod to my brother-in-law since he enjoyed hiking into places and fishing. That was 20 years ago and he still has that pack rod although it is rarely used these days. My brother is also an avid fisherman but has never tried fly fishing. After hearing all of my tall tales (they get better every time I tell them...) he is now interested and wanted to borrow that 4 piece rod to try. That rekindled my brother-in-laws fondness for stalking some brooks again and my own interest went kinda wild too. Sort of like a slippery slope.......and just before Christmas too...... Well Santa was extremely good and he found some excellent deals on a few St. Croix and Diamondback rods along with a few Hardy and Orvis reels. Went with 9' rods 6wt and 5/6 Hardy reels for those rods as gifts and one for me too. I did say slippery slope didn't I? So after Christmas I went looking for some line and found three (6'6", 7' and an 8'), 4wt rods that really feel nice. Since they were priced so I couldn't refuse them - I picked up all three with the intent of returning two after I've tried them. Now I don't need all three of these rods and that is my dilemma. One is a Diamondglass 7', (real slow action), the others are both St. Croix (Avids) graphite's with one being 6'6" and the other an 8'. The wiggle test alone has almost eliminated the 8' rod based on my past experiences of stream fishing where a long rod could be a real pain and it being a relatively fast rod may be a problem due to my lack of skills right now. I picked up some 333 Cortland line (WF4F) just to use for testing these rods and will save the good stuff for when the ice is fluid again. So I'll be out in the back yard tomorrow flogging the snow testing these rods which should get the neighbors talking.... I would be interested in hearing what others think about the 4wt Diamondglass rods and the 6'6" Avid rod. I like the feel of each with the St. Croix obviously being faster (moderately fast) and the Diamondglass feeling like a silk scarf in the hand. Can't wait to see how they feel with some line going thru the tip. I've matched a Cortland Embassy 40 to the Diamondglass and an Orvis CFO III to the St. Croix 7'. When the wife asks why I need two 4wt rods, I'll be standing on thin ice here so it's my full intent to hand her one of the rods and tell her I've been testing them both to insure (pick one) will be perfect for her when she wants to join in on the fun..... Now how can she deny me on that one I ask....;-) Thank you for your input and a Happy New Year, Bob S. |
#2
|
|||
|
|||
![]()
Bob S typed:
Hello all, Hi Bob. snip Now I don't need all three of these rods and that is my dilemma. One is a Diamondglass 7', (real slow action), the others are both St. Croix (Avids) graphite's with one being 6'6" and the other an 8'. The wiggle test alone has almost eliminated the 8' rod based on my past experiences of stream fishing where a long rod could be a real pain and it being a relatively fast rod may be a problem due to my lack of skills right now. That Diamondglass 7' 4WT is a sweet rod. I borrowed one for a few hours this past year and enjoyed it a lot. Very slow, but good for short, delicate casts in the streams here in MA. I'm looking to buy a short 2WT, but the Diamondglass 2WT is only 5', and I'm not sure I want to go *that* short. Besides, I ****ed off a certain not-to-be-named NC fly shop proprietor a few weeks ago and he won't sell me one now. ;-) -- TL, Tim ------------------------ http://css.sbcma.com/timj/ |
#3
|
|||
|
|||
![]()
"Bob S" wrote in news:L5etf.47091$XJ5.8529
@twister.nyroc.rr.com: I would be interested in hearing what others think about the 4wt Diamondglass rods and the 6'6" Avid rod. All depends on the kind of fishing you plan to do. By my own standards, If you can't cross a stream in less than about a five or six steps, and the canopy isn't that of a rain forest, I like a longer rod, and generally won't go below about 7'9" for such purposes, with 8'6" often better. Casting can get a hair tough sometimes, depending on the cover, but not impossible. What you'll find with experience is that there's a trade off. You'll always be dealing with avoiding streamside brush, and that a short rod can help with that. The flip side is that line control is very important to achieve a drag free drift with dry flies and a dead drift with nymphs, and a long rod makes these things much easier. -- Scott Reverse name to reply |
#4
|
|||
|
|||
![]()
Bob S wrote:
Hello all, Been lurking awhile and I see there are a few legitimate anglers in the crowd and a few with lot's of experience they're willing to share - so I'll wade on in and ask for some advice. snip The shortest rod I own is a 7' 2wt. It's ok for the tight quarters, small creeks I fish, but I find it a little too short, even for tiny creeks. If your looking for one, all around rod, i'd advise you to get the longer rod....but who are we kidding here. You'll have a fleet or rods, in every imaginable weight and length. Reels.......fergetaboutit. It sounds like you're already, well on your way. :-) brians |
#5
|
|||
|
|||
![]() "Bob S" Been lurking awhile - snip - Detailed perhaps however, all information was relevant, certainly though and not without little thought it is my opinion, if I may be so bold as to offer in the midst of these fine, respectable gentlemen who represent the North's and the South's most excellent manners and wit, among whom are not in the least most well read gentlemen, I would like to say that I did not think it in least, from any perspective of those present, long winded..... john |
#6
|
|||
|
|||
![]() "asadi" wrote in message . com... "Bob S" Been lurking awhile - snip - Detailed perhaps however, all information was relevant, certainly though and not without little thought it is my opinion, if I may be so bold as to offer in the midst of these fine, respectable gentlemen who represent the North's and the South's most excellent manners and wit, among whom are not in the least most well read gentlemen, I would like to say that I did not think it in least, from any perspective of those present, long winded..... john Hm...... Yep. Anyway, the minority report: Shorter is better......always......well, nearly. Longer rods are better for dapping. That's o.k. if you're going to be a dapping specialist.....most of us aren't. Theoretically a longer rod will also allow you to make longer casts. In fact, improving your technique will make a much bigger difference than does another foot or two of rod length. Besides, most people spend way too much time making casts that are much too long to do them any practical good in catching fish. Nothing wrong with making long casts if that's what you're there for.....but it isn't the way to catch a lot of fish.....generally. Short rods are easier to pack, easier to carry through the woods, easier to swing in tight quarters, and easier to control. There is a pervasive and pernicious conventional wisdom that says a longer rod is better for fighting fish because you get more leverage. This is as wrong as it can possibly be. The fish has the long end of the lever. Since the fulcrum and the short end remain constant (more or less), the shorter the rod, the less mechanical advantage the fish enjoys. Leverage is also an issue in casting.....the shorter the rod, the less work to aerialize the line. Short rods make it much easier to bring a fish in close enough to grab or net when the time comes. Short rods are lighter. I've got a four foot rod I built out of the tip section of an old busted up glass rod I found in an abandoned house. It works beautifully on small overgrown streams. It has also served me well on larger, more open waters. Wolfgang |
#7
|
|||
|
|||
![]()
"Wolfgang" wrote in :
It works beautifully on small overgrown stream Would you, by any chance, be talking about dem brook trout streams? That's a different story altogether. They'll take anything, presented anyhow. The challenge there is bushwhacking to the stream, and showing enough restraint not to fish it out! Damn, if brook trout weren't so pretty and tasty, and living in such godawful pretty places, and if fishing for them weren't so much fun, there'd hardly be any reason to fish for them at all. -- Scott Reverse name to reply |
#8
|
|||
|
|||
![]() "Wolfgang" wrote in message ... I've got a four foot rod I built out of the tip section of an old busted up glass rod I found in an abandoned house. It works beautifully on small overgrown streams. It has also served me well on larger, more open waters. Wolfgang Years ago, I first got into fly fishing through some fortuitous gifts of fly rods. Old, broken and cheap cane they were. I found a damaged Southbend and did some alterations. With epoxy and what not I made the second to last section of a four piece rod, the butt section. Actually a bit shorter as I had a nine foot rod to begin with and ended up with a six and one half foot rod. I gave that rod away to a young boy and now, looking back on it, I release what a sweet little rod it was ...maybe that's why I gave it to him in the first place. Anyhow, his mom was a six foot African Goddess and I never got laid. john . . . I wish I would have kept the rod. |
#9
|
|||
|
|||
![]() "Scott Seidman" wrote in message . 1.4... "Wolfgang" wrote in : It works beautifully on small overgrown stream Would you, by any chance, be talking about dem brook trout streams? That's a different story altogether. They'll take anything, presented anyhow. The challenge there is bushwhacking to the stream, and showing enough restraint not to fish it out! Well, I DO love my brookies. Damn, if brook trout weren't so pretty and tasty, and living in such godawful pretty places, and if fishing for them weren't so much fun, there'd hardly be any reason to fish for them at all. True enough. However, it is what it is. We simply have to deal with it. ![]() But...... With or without brookies.....with or without small streams.....one can fish effectively, successfully, and gleefully for a lifetime with a short rod. Wolfgang who will thank the assembled perverts here to refrain from mentioning and dwelling......at great length......on the all too obvious parallel. ![]() |
#10
|
|||
|
|||
![]() "asadi" wrote in message . com... Years ago, I first got into fly fishing through some fortuitous gifts of fly rods. Old, broken and cheap cane they were. I found a damaged Southbend and did some alterations. With epoxy and what not I made the second to last section of a four piece rod, the butt section. Actually a bit shorter as I had a nine foot rod to begin with and ended up with a six and one half foot rod. I gave that rod away to a young boy and now, looking back on it, I release what a sweet little rod it was ...maybe that's why I gave it to him in the first place. Anyhow, his mom was a six foot African Goddess and I never got laid. john . . . I wish I would have kept the rod. Near as I can figure it (and I wouldn't risk a shiny new nickel on it), there's just gotta be some sort of karmic principle at work here.....but I be go ta hell if I got a clue what it might be. It's like when I gave that kid all those flies in Estes Park years ago and then ten years later I get a flat tire. What the hell is THAT about?! ![]() Wolfgang who knows that keeping score.....accurately......is a stone cold bitch. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dallas Tx, Fly Fishers Auction April 23rd | No left turn | Fly Fishing | 0 | April 22nd, 2005 12:16 AM |
A Quick Intro & Rod/Reel Question | AJH | Bass Fishing | 30 | March 28th, 2004 02:33 AM |