anchor question...>>>

On Mon, 07 Jun 2004 15:42:54 GMT, "Bob" wrote:
My
dad has an OMC/Grumman 16' aluminum that gives us both fits sometimes
getting it to hold at anchor in the wind, and when I saw the picture of this
anchor I knew that it would probably be the answer that we were looking for.

===========================================

The key to getting ANY anchor to hold is sufficient scope (ratio of
anchor line to water depth). 7 to 1 is considered ideal, 5 to 1 will
usually suffice. Also use a 3 or 4 foot length of chain as others
have mentioned. The implication is that if you are anchoring in 30
feet of water, you need between 150 and 200 feet of line. Many small
fishing boats do not carry that much. I've found that a mid-sized
canvas tote bag will hold 200 feet of 3/8 line, and the anchor. Just
lay the line into the bag, do not coil, and it will pay out with no
snarling or kinking.