anchor question...>>>

"Marty S." wrote in message
...
Steve.... you recommend this type (the river anchor) over the grapneling
hook or the "Navy" style?

You've got what? A 12-14 (maybe 16 foot) aluminum boat??? Unless you're
fishing in some serious current and/or wind, a 12-15 pound River anchor will
give all the hold you're going to need. I was using this same style of
anchor (the 15 pound model) to hold a 17 foot glass boat and it worked well
in all but the hardest wind.

The thing to remember is to get the anchor tipped on it's side and to let
out enough anchor rope. There's more to anchoring a boat than dropping the
thing over the side and expecting it to hold. Figure to let out at least
twice the water depth in anchor rope in order to get it to hold properly.
This will get the anchor on it's side and the flukes dug into the bottom.

Make sure you've got enough quality rope, I use 75 or 100 feet (can't
remember which exactly) and it's good rope, not hemp and not braided nylon
ski rope. This is a 1/2" or 5/8" static kernmantle type rope, easy on the
hands and no stretch.

I don't like the Danforth style anchor because they can REALLY dig in and be
difficult to remove. And, in rocky bottoms, chances are, it'll stay there.
I went through three of them before I went to the River Anchor. Now, I
carry one of those (20 pound model) and a Richter Anchor
http://www.richteranchors.com/ and my boat doesn't move. The Richter is
great, but not readily available, where you should be able to get a River
Anchor at Wal-Mart.
--
Steve @ OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com