Question for you electronics wizards...>>>

The easiest way to hook them up so you will not have electrical interaction
problems is to attach the negative wire of the fish finder to the same
battery terminal as the negative wire of the trolling motor. That way both
items use the same "ground" path.

Bill Grannis
service manager

PerZakly

Get in the habit of connecting the fish finder and everything else (lights,
etc.) that way. Someday there will be an internal connection of that "ground"
to the boat and other users. This way no problems will develop.

cheers

oz

You should have no problems. The only issue and it is a minor one is that
your batteries will be discharged unevenly. If you aren't running them
almost all the way down before recharging there should be no problem what so
ever.

--
Public Fishing & Boating Forums
Fishing & Boating Link Index
www.YumaBassMan.com


"Marty S." wrote in message
...
I'm running 2 12-volt batteries running in series to power my 24-volt
electric motor in my jon boat (on an electric-only reservoir) and I want
to
run a fish finder. Here's my question -- can I safely run the fish finder
off of one of the 2 12-volt batteries while running the 24-volt motor?
Or,
is that going to burn up the fish finder? Should I just invest in a
couple
of 6-volt lantern batteries instead?

--
Marty S.
Baltimore, MD USA

"Marty S." wrote in message
...
I'm running 2 12-volt batteries running in series to power my 24-volt
electric motor in my jon boat (on an electric-only reservoir) and I want
to
run a fish finder. Here's my question -- can I safely run the fish
finder
off of one of the 2 12-volt batteries while running the 24-volt motor?
Or,
is that going to burn up the fish finder? Should I just invest in a
couple
of 6-volt lantern batteries instead?



The easiest way to hook them up so you will not have electrical interaction
problems is to attach the negative wire of the fish finder to the same
battery terminal as the negative wire of the trolling motor. That way both
items use the same "ground" path.

Bill Grannis
service manager

Go for it. Won't hurt a thing.
G
"Marty S." wrote in message
...
I'm running 2 12-volt batteries running in series to power my 24-volt
electric motor in my jon boat (on an electric-only reservoir) and I want
to
run a fish finder. Here's my question -- can I safely run the fish finder
off of one of the 2 12-volt batteries while running the 24-volt motor?
Or,
is that going to burn up the fish finder? Should I just invest in a
couple
of 6-volt lantern batteries instead?

--
Marty S.
Baltimore, MD USA

"Marty S." wrote in message
...
Here's my question -- can I safely run the fish finder
off of one of the 2 12-volt batteries while running the 24-volt motor?

that should work fine.

As daytripper suggested, it would be a lot safer if you connected it across
the battery that had a connection to "ground". The trolling motor could be
totally isolated, but I wouldn't bet on it. It might be isolated as long as
the aluminum case of the lower unit didn't touch anything else.

The trolling motor should have a "positive" and a "Negative" power lead. If
either side was referenced to ground it would be the negative, so connect
your fish finder across the battery that connects to the negative trolling
motor lead.

As another has said, the fishfinder will create an unequal discharge in the
two batteries, so one will go dead before the other. But unless you sit
fishing for a LONG time the fish finder draw will be insignificant. Now, if
you start running spot lights or similar there might be an issue.

Rod

Thanks to everyone that helped!!!

As an aside, I sent email to both Eagle and Lowrance -- they are actually
the same company and are located in the same place in Tulsa and they run
almost identical websites -- but I got TWO COMPLETELY DIFFERENT ANSWERS TO
THE SAME QUESTION!!!!

I got this back from Eagle:

"Thank you for your inquiry. You can connect the sonar across a single
battery to obtain 12 volts for the unit. WE would recommend connecting
across the first battery instead of the second as it provides 0-12 volts and
is isolated from the charger or other 24 volt power accessories.

Thank you for choosing Eagle.


Eagle Customer Service
12000 E. Skelly Dr.
Tulsa, OK 74128

Customer Service: 1-800-324-1354
Eagle website: http://www.eaglesonar.com/"


But, I got this from Lowrance:

"Thank you for your inquiry. No, you cannot connect the Cuda 168 to the 24
volt system (2 - 12 volt batteries in series = 24 volts). This could fry
the sonar unit. You will need to connect the Cuda 168 to it's own 12 volt
battery. Considering weight and space you may want to consider a small
lawn/motorcycle or gel cell rechargeable battery.

If we can be of any further assistance please contact us.

11
Lowrance Electronics
12000 E. Skelly Dr.
Tulsa, OK 74128
1-800-324-1356
www.lowrance.com

LEI: Parts & Accessories
1-800-324-0045
www.lei-extras.com"


I am going to go with the majority on this subject and hook my fish finder
up to one of the two batteries that I am running in my 24-volt system --
with the negative wire to the fish finder hooked up to the same terminal as
the negative wire to the motor.


THANKS AGAIN FOR YOUR HELP!!!!


--
Marty S.
Baltimore, MD USA


"Marty S." wrote in message
...
I'm running 2 12-volt batteries running in series to power my 24-volt
electric motor in my jon boat (on an electric-only reservoir) and I want
to
run a fish finder. Here's my question -- can I safely run the fish finder
off of one of the 2 12-volt batteries while running the 24-volt motor?
Or,
is that going to burn up the fish finder? Should I just invest in a
couple
of 6-volt lantern batteries instead?

--
Marty S.
Baltimore, MD USA

Actually, the responses aren't conflicting. They answered different
questions. :^) Appears the person responding from Lowrance misread
your question and thought you wanted to run the unit off of 24 volts.

-Jim


Marty S. wrote:
Thanks to everyone that helped!!!

As an aside, I sent email to both Eagle and Lowrance -- they are actually
the same company and are located in the same place in Tulsa and they run
almost identical websites -- but I got TWO COMPLETELY DIFFERENT ANSWERS TO
THE SAME QUESTION!!!!

I got this back from Eagle:

"Thank you for your inquiry. You can connect the sonar across a single
battery to obtain 12 volts for the unit. WE would recommend connecting
across the first battery instead of the second as it provides 0-12 volts and
is isolated from the charger or other 24 volt power accessories.

Thank you for choosing Eagle.


Eagle Customer Service
12000 E. Skelly Dr.
Tulsa, OK 74128

Customer Service: 1-800-324-1354
Eagle website: http://www.eaglesonar.com/"


But, I got this from Lowrance:

"Thank you for your inquiry. No, you cannot connect the Cuda 168 to the 24
volt system (2 - 12 volt batteries in series = 24 volts). This could fry
the sonar unit. You will need to connect the Cuda 168 to it's own 12 volt
battery. Considering weight and space you may want to consider a small
lawn/motorcycle or gel cell rechargeable battery.

If we can be of any further assistance please contact us.

11
Lowrance Electronics
12000 E. Skelly Dr.
Tulsa, OK 74128
1-800-324-1356
www.lowrance.com

LEI: Parts & Accessories
1-800-324-0045
www.lei-extras.com"


I am going to go with the majority on this subject and hook my fish finder
up to one of the two batteries that I am running in my 24-volt system --
with the negative wire to the fish finder hooked up to the same terminal as
the negative wire to the motor.


THANKS AGAIN FOR YOUR HELP!!!!