![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() "bleve" wrote in message ... Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett The 82 pound motor should work, but I've been running the 109 lb./36 volt version and it's a beast! If that motor won't hold, you have no business being on the water. -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#2
|
|||
|
|||
![]()
I think the 109 is the way to go - just saw one sell on Ebay for $750 new in
the box. Warren "Steve @ OutdoorFrontiers" wrote in message ... "bleve" wrote in message ... Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett The 82 pound motor should work, but I've been running the 109 lb./36 volt version and it's a beast! If that motor won't hold, you have no business being on the water. -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#3
|
|||
|
|||
![]() "WARREN WOLK" wrote in message news:wwEkh.6924$9H4.2357@trndny07... I think the 109 is the way to go - just saw one sell on Ebay for $750 new in the box. You will notice that I didn't give a glowing recommendation on the 82 pound motor, I simply said it "should" work. You know me Warren, "More horsepower, arh arh, ARH!!!" -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#4
|
|||
|
|||
![]()
WARREN WOLK wrote:
I think the 109 is the way to go - just saw one sell on Ebay for $750 new in the box. Warren This is all good information. I will not buy another motor on ebay. Just purchased a 82lb digital steer on ebay from the same person that sells most of the motors on there and it had issues out of the box. The seller stated a warranty of 90 days, but when I took it to the repair shop the laughed and said that it did not come with a Motorguide warranty. So I sent it back to the seller and looking to buy something new. The 82lb that was shipped to me from the ebay seller had less power than my 67lb. I was told by the repair shop that it had at least one bad board that they knew of that was causing it to not get full power. Also the motor was a 2002 model being sold as new. Another problem was the constant-on did not work. So I really did not get to experience how an 82lb would feel. "Steve @ OutdoorFrontiers" wrote in message ... "bleve" wrote in message ... Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett The 82 pound motor should work, but I've been running the 109 lb./36 volt version and it's a beast! If that motor won't hold, you have no business being on the water. -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#5
|
|||
|
|||
![]()
"bleve" wrote in message
... WARREN WOLK wrote: I think the 109 is the way to go - just saw one sell on Ebay for $750 new in the box. Warren This is all good information. I will not buy another motor on ebay. Just purchased a 82lb digital steer on ebay from the same person that sells most of the motors on there and it had issues out of the box. The seller stated a warranty of 90 days, but when I took it to the repair shop the laughed and said that it did not come with a Motorguide warranty. So I sent it back to the seller and looking to buy something new. The 82lb that was shipped to me from the ebay seller had less power than my 67lb. I was told by the repair shop that it had at least one bad board that they knew of that was causing it to not get full power. Also the motor was a 2002 model being sold as new. Another problem was the constant-on did not work. So I really did not get to experience how an 82lb would feel. Ebay is a mixed bag. I have had mostly good luck, but I always ask specific questions of sellers and if they do not answer my exact question fully I don't buy from them. That being said. The Trolling Motor Doctor has a rock solid reputation. http://www.trollingmotordoctor.com Their prices will be comparable to or better than Bass Pro Shops, and if you want to gamble on a rebuilt motor they may have some available also, but theirs will go out the door fully functional and they would never sell you a rebuilt claiming its new. They are also a full parts stocking warranty center. -- Bob La Londe Fishing Arizona & The Colorado River Fishing Forums & Contests http://www.YumaBassMan.com -- Posted via a free Usenet account from http://www.teranews.com |
#6
|
|||
|
|||
![]()
On Wed, 27 Dec 2006 22:26:05 -0500, bleve wrote:
This is all good information. I will not buy another motor on ebay. Just purchased a 82lb digital steer on ebay from the same person that sells most of the motors on there and it had issues out of the box. The seller stated a warranty of 90 days, but when I took it to the repair shop the laughed and said that it did not come with a Motorguide warranty. So I sent it back to the seller and looking to buy something new. The 82lb that was shipped to me from the ebay seller had less power than my 67lb. I was told by the repair shop that it had at least one bad board that they knew of that was causing it to not get full power. Also the motor was a 2002 model being sold as new. Another problem was the constant-on did not work. So I really did not get to experience how an 82lb would feel. You should post the name of the ebay seller to allow others to avoid the same problems you encountered! Dan Remove the x for e-mail reply 1996 HD Sportster 1200S. N9JBF. Bass fishing Aficionado! www.outdoorfrontiers.com www.SecretWeaponLures.com A proud charter member of "PETAF", People for Eating Tasty Animals and Fish!!! |
#7
|
|||
|
|||
![]()
Dan, danl, Redbeard uh Greybeard now wrote:
On Wed, 27 Dec 2006 22:26:05 -0500, bleve wrote: This is all good information. I will not buy another motor on ebay. Just purchased a 82lb digital steer on ebay from the same person that sells most of the motors on there and it had issues out of the box. The seller stated a warranty of 90 days, but when I took it to the repair shop the laughed and said that it did not come with a Motorguide warranty. So I sent it back to the seller and looking to buy something new. The 82lb that was shipped to me from the ebay seller had less power than my 67lb. I was told by the repair shop that it had at least one bad board that they knew of that was causing it to not get full power. Also the motor was a 2002 model being sold as new. Another problem was the constant-on did not work. So I really did not get to experience how an 82lb would feel. You should post the name of the ebay seller to allow others to avoid the same problems you encountered! Dan, Well if they make good and give me my money back, I don't want to slam them too bad. I will post it, but will wait to see if they honor giving me my money back. -Bennett Dan Remove the x for e-mail reply 1996 HD Sportster 1200S. N9JBF. Bass fishing Aficionado! www.outdoorfrontiers.com www.SecretWeaponLures.com A proud charter member of "PETAF", People for Eating Tasty Animals and Fish!!! |
#8
|
|||
|
|||
![]() bleve wrote: Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett Fished today with a guide on Lake Oconee here in Georgia - he has a 21 foot Triton with a 225 Merc on it. His trolling motor is an 82 pound thrust Tour Edition Motor Guide. I asked him if he ever felt like he needed a bigger trolling motor and he said no. He guides many days each year and spends lots of time on the water. Al Bassett is the guide and he also fishes some tournament trails. This fall he spent a week long trip on Okeechobee practicing and fishing a tournament. He said the 82 was fine on all the trips he has made there, too. Ronnie http://fishing.about.com |
#9
|
|||
|
|||
![]()
Ronnie wrote:
bleve wrote: Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett Fished today with a guide on Lake Oconee here in Georgia - he has a 21 foot Triton with a 225 Merc on it. His trolling motor is an 82 pound thrust Tour Edition Motor Guide. I asked him if he ever felt like he needed a bigger trolling motor and he said no. He guides many days each year and spends lots of time on the water. Al Bassett is the guide and he also fishes some tournament trails. This fall he spent a week long trip on Okeechobee practicing and fishing a tournament. He said the 82 was fine on all the trips he has made there, too. Thanks Ronnie. This and the information from those that have the 109s is very helpful. I as well have a fishing buddy that has a 20ft Basscat with an 82lb tour, and he thinks it is a good fit as well. At this point, I am still on the fence. If I do go with a 109, I like the idea of using just 3 group 31 batteries as Bob suggested. Once again, thanks for the great testimonial from the guide. -Bennett Ronnie http://fishing.about.com |
#10
|
|||
|
|||
![]()
82 is fine, until you have to fish in a strong wind and/or current. Most
guides stay out of that situation trying to keep thier clients comfortable (Huber is famous for this ;-). I've been in several situations where my 109 was barely enough to keep me stationary. Warren http://www.warrenwolk.com "bleve" wrote in message ... Ronnie wrote: bleve wrote: Hello all, I have a Skeeter ZX225 which is a 20ft boat. I purchased this boat used and it had an older 67lb Motorguide on it. This motor will not move the boat in windy conditions. I want to stay with Motorguide so I don't have to drill new holes for the mount. From talking to a salesperson, they tell me the 82lb pro series should be good enough to move my boat around. The question is, will I be happy with this, Or should I go 36 volts to the 109lb version? -Bennett Fished today with a guide on Lake Oconee here in Georgia - he has a 21 foot Triton with a 225 Merc on it. His trolling motor is an 82 pound thrust Tour Edition Motor Guide. I asked him if he ever felt like he needed a bigger trolling motor and he said no. He guides many days each year and spends lots of time on the water. Al Bassett is the guide and he also fishes some tournament trails. This fall he spent a week long trip on Okeechobee practicing and fishing a tournament. He said the 82 was fine on all the trips he has made there, too. Thanks Ronnie. This and the information from those that have the 109s is very helpful. I as well have a fishing buddy that has a 20ft Basscat with an 82lb tour, and he thinks it is a good fit as well. At this point, I am still on the fence. If I do go with a 109, I like the idea of using just 3 group 31 batteries as Bob suggested. Once again, thanks for the great testimonial from the guide. -Bennett Ronnie http://fishing.about.com |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trolling Motor | FishinJC | Bass Fishing | 6 | June 19th, 2006 03:21 AM |
Trolling Motor | Steve @ OutdoorFrontiers | Bass Fishing | 0 | January 29th, 2006 12:03 AM |
Motor Guide trolling motor | IBNFSHN | Bass Fishing | 0 | February 16th, 2005 03:59 PM |
Trolling motor power | Bob La Londe | Bass Fishing | 3 | October 14th, 2003 04:46 AM |