A Fishing forum. FishingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishingBanter forum » rec.outdoors.fishing newsgroups » Fly Fishing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Wading staff... re-visit



 
 
Thread Tools Display Modes
  #1  
Old October 25th, 2004, 11:22 PM
brians
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit

Larry L wrote:
"Wayne Knight" wrote


I don't know why you hate to admit it,




I suffer from SIMMSaphobia ... a condition that started with customer
service that left a bad taste in my mouth .... I'd already own the SIMMS
staff if it didn't say SIMMS on it


The staff holster say SIMMS in big, white, block letters. Maybe a black
felt pen will cure your phobia.

I used mine yesterday. I know that $99 saved me from getting wet a
couple times.

It folds up very easily, and unfolds/extends reasonable easy. Just don't
try it when your standing in the middle of the river, waiting to be
swept downstream. ;-) The Simms staff uses a metal cable to hold it
together. I don't think the other brands do. The shaft diameter is
bigger than most standard staffs. Simms come with a retractor, so you
don't have a long leash to get in the way.

brians

  #2  
Old October 26th, 2004, 12:27 AM
rw
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit

brians wrote:

The staff holster say SIMMS in big, white, block letters. Maybe a black
felt pen will cure your phobia.

I used mine yesterday. I know that $99 saved me from getting wet a
couple times.

It folds up very easily, and unfolds/extends reasonable easy. Just don't
try it when your standing in the middle of the river, waiting to be
swept downstream. ;-) The Simms staff uses a metal cable to hold it
together. I don't think the other brands do. The shaft diameter is
bigger than most standard staffs. Simms come with a retractor, so you
don't have a long leash to get in the way.


It's an excellent product, and, IMO, well worth $99.

--
Cut "to the chase" for my email address.
  #3  
Old October 26th, 2004, 12:37 AM
Larry L
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit


"brians" wrote


It folds up very easily, and unfolds/extends reasonable easy. Just don't
try it when your standing in the middle of the river, waiting to be swept
downstream. ;-) The Simms staff uses a metal cable to hold it together. I
don't think the other brands do. The shaft diameter is bigger than most
standard staffs. Simms come with a retractor, so you don't have a long
leash to get in the way.



I've looked at it and it does seem to be a better product than any of the
others I've seen .... maybe a Marks-A-Lot is the answerG, as you suggest.
I actually went into a shop one day last summer with the intention of buying
one, picked one up and was on the way to check out, but then I opened it to
make sure it worked ok and it seemed too long to me, so I hesitated ....
then I saw those big, dreaded, letters S- I- M - shudder :-) .... and
decided to leave and "think on it" G

I'll end up with one, I bet .... and it's not the $99 that has slowed the
process, ....


  #4  
Old October 26th, 2004, 12:37 AM
Larry L
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit


"brians" wrote


It folds up very easily, and unfolds/extends reasonable easy. Just don't
try it when your standing in the middle of the river, waiting to be swept
downstream. ;-) The Simms staff uses a metal cable to hold it together. I
don't think the other brands do. The shaft diameter is bigger than most
standard staffs. Simms come with a retractor, so you don't have a long
leash to get in the way.



I've looked at it and it does seem to be a better product than any of the
others I've seen .... maybe a Marks-A-Lot is the answerG, as you suggest.
I actually went into a shop one day last summer with the intention of buying
one, picked one up and was on the way to check out, but then I opened it to
make sure it worked ok and it seemed too long to me, so I hesitated ....
then I saw those big, dreaded, letters S- I- M - shudder :-) .... and
decided to leave and "think on it" G

I'll end up with one, I bet .... and it's not the $99 that has slowed the
process, ....


  #5  
Old October 22nd, 2004, 12:56 AM
Larry L
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit


"Wayne Knight" wrote


I don't know why you hate to admit it,



I suffer from SIMMSaphobia ... a condition that started with customer
service that left a bad taste in my mouth .... I'd already own the SIMMS
staff if it didn't say SIMMS on it





  #6  
Old October 22nd, 2004, 04:43 PM
Jim
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit


"Larry L" wrote in message
...

"Jeff Taylor" wrote


Thoughts, ideas, suggestions appreciated...



I have two .... one bungi cord pop together one similar to the one on

e-bay

another one piece walking stick I found abandoned in the mud along the

HFork
and put a new handle on


Folding the Folstaff (sp) is NOT nearly as simple as it looks ... the
sections jam together .. in effect it becomes a one piece that can only

be
folded with difficulty and tools, back at the trailer

A one piece staff is a pain, just about as often as it is useful ... but I
simply MUST have it when I need it, my knee is that bad .. so I put up

with
it the rest of the time

As much as I hate to admit it ... and I really really hate it ... I'm
thinking of getting the SIMMS staff ... it's too damn long, but looks like
it can actually be folded up and gotten out of the way, except when

needed,
then looks plenty strong to be up to the task



I have a 3/4" dia Folstaff that I bought for my wife. She couldn't get the
sections apart either. We were at the College Park FF show two years ago and
ran into a fellow selling a Taiwanese knock off of the Folstaff. The big
advantage was that the Taiwanese had figured out how to make the sections
come apart more easily. The name on the staff was "OUTBACK". I recommend it,
especially at 1/2 the price of the Folstaff (I think itr was about $60).
Jim Ray




  #7  
Old October 22nd, 2004, 05:09 PM
George Cleveland
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit

On Fri, 22 Oct 2004 11:43:53 -0400, "Jim" wrote:


"Larry L" wrote in message
...

"Jeff Taylor" wrote


Thoughts, ideas, suggestions appreciated...



I have two .... one bungi cord pop together one similar to the one on

e-bay

another one piece walking stick I found abandoned in the mud along the

HFork
and put a new handle on


Folding the Folstaff (sp) is NOT nearly as simple as it looks ... the
sections jam together .. in effect it becomes a one piece that can only

be
folded with difficulty and tools, back at the trailer

A one piece staff is a pain, just about as often as it is useful ... but I
simply MUST have it when I need it, my knee is that bad .. so I put up

with
it the rest of the time

As much as I hate to admit it ... and I really really hate it ... I'm
thinking of getting the SIMMS staff ... it's too damn long, but looks like
it can actually be folded up and gotten out of the way, except when

needed,
then looks plenty strong to be up to the task



I have a 3/4" dia Folstaff that I bought for my wife. She couldn't get the
sections apart either. We were at the College Park FF show two years ago and
ran into a fellow selling a Taiwanese knock off of the Folstaff. The big
advantage was that the Taiwanese had figured out how to make the sections
come apart more easily. The name on the staff was "OUTBACK". I recommend it,
especially at 1/2 the price of the Folstaff (I think itr was about $60).
Jim Ray



I have one of the Folstaff knock offs ($29 at Gander Mountain). They
can also get jammed but by wiggling the sections I've always been able
to get them apart. Maybe this is a case when machining tolerances can
be too tight.


g.c.


  #8  
Old October 21st, 2004, 11:27 PM
Jeff Taylor
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit



From: Ken Fortenberry
Date: Thu, 21 Oct 2004 22:01:55 GMT
Local: Thurs, Oct 21 2004 3:01 pm
Subject: Wading staff... re-visit




Wading staffs are just an excuse to go wading where you shouldn't
be wading. Besides that, they're a bother and a nuisance.


Follow the Fortenberry Rule of Wading, to whit:



Thou shalt not wetteth thy balls.
Ken Fortenberry


Well, I can't say I disagree with your rule...

I don't see the staff as something I would use all the time, more as a
fall back if I found myself in trouble. In the particular situation I
mentioned in my first post, I made it about 3/4 of the way across the river
( I could have easily made it to the far side of the river) when I decided
it was time to head back. Not sure if I was tired or what, however I was
having a hell of a time trying to get back. I ended up walking to the far
side and up river about 200 yds. to a safe crossing.

Thanks,

JT




  #9  
Old October 22nd, 2004, 05:09 PM
George Cleveland
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit

On Fri, 22 Oct 2004 11:43:53 -0400, "Jim" wrote:


"Larry L" wrote in message
...

"Jeff Taylor" wrote


Thoughts, ideas, suggestions appreciated...



I have two .... one bungi cord pop together one similar to the one on

e-bay

another one piece walking stick I found abandoned in the mud along the

HFork
and put a new handle on


Folding the Folstaff (sp) is NOT nearly as simple as it looks ... the
sections jam together .. in effect it becomes a one piece that can only

be
folded with difficulty and tools, back at the trailer

A one piece staff is a pain, just about as often as it is useful ... but I
simply MUST have it when I need it, my knee is that bad .. so I put up

with
it the rest of the time

As much as I hate to admit it ... and I really really hate it ... I'm
thinking of getting the SIMMS staff ... it's too damn long, but looks like
it can actually be folded up and gotten out of the way, except when

needed,
then looks plenty strong to be up to the task



I have a 3/4" dia Folstaff that I bought for my wife. She couldn't get the
sections apart either. We were at the College Park FF show two years ago and
ran into a fellow selling a Taiwanese knock off of the Folstaff. The big
advantage was that the Taiwanese had figured out how to make the sections
come apart more easily. The name on the staff was "OUTBACK". I recommend it,
especially at 1/2 the price of the Folstaff (I think itr was about $60).
Jim Ray



I have one of the Folstaff knock offs ($29 at Gander Mountain). They
can also get jammed but by wiggling the sections I've always been able
to get them apart. Maybe this is a case when machining tolerances can
be too tight.


g.c.


  #10  
Old October 21st, 2004, 11:29 PM
Scott Seidman
external usenet poster
 
Posts: n/a
Default Wading staff... re-visit

"Larry L" wrote in
:


"Jeff Taylor" wrote


Thoughts, ideas, suggestions appreciated...



I have two .... one bungi cord pop together one similar to the one on
e-bay

another one piece walking stick I found abandoned in the mud along the
HFork and put a new handle on


Folding the Folstaff (sp) is NOT nearly as simple as it looks ... the
sections jam together .. in effect it becomes a one piece that can
only be folded with difficulty and tools, back at the trailer


Unless, of course, you know the trick of rolling the frozen joint across
your knee firmly to loosen it.

Scott
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wading and the MENISCUS JR Fly Fishing 16 August 24th, 2004 11:47 AM
Drying wading boots... riverman Fly Fishing 92 June 26th, 2004 05:27 AM
Wading boot fit? Jim Fly Fishing 10 April 26th, 2004 07:40 PM
What wading shoe should I buy? steve sullivan Fly Fishing 9 December 5th, 2003 03:48 AM
Wading for Walleye in the Rain Bob Colenso General Discussion 1 November 29th, 2003 03:51 AM


All times are GMT +1. The time now is 10:50 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishingBanter.
The comments are property of their posters.