A Fishing forum. FishingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishingBanter forum » rec.outdoors.fishing newsgroups » Fly Fishing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Armor all



 
 
Thread Tools Display Modes
  #1  
Old March 28th, 2007, 06:29 PM posted to rec.outdoors.fishing.fly
[email protected]
external usenet poster
 
Posts: 398
Default Armor all

Why you should not use armor-all on some lines;

http://www.flyforums.co.uk/showthread.php?t=8733

TL
MC

  #2  
Old March 28th, 2007, 06:50 PM posted to rec.outdoors.fishing.fly
Tom Nakashima
external usenet poster
 
Posts: 792
Default Armor all


wrote in message
oups.com...
Why you should not use armor-all on some lines;

http://www.flyforums.co.uk/showthread.php?t=8733

TL
MC


Greetings again Mike,
I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA and
spoke
with the tech department about cleaning and dressing fly-lines. One of the
tech's told me it's ok to use Armor All on the line after it's been cleaned.
He further said there is no need to use a dressing if I use the SA cleaning
pads, as it is the only thing that I needed to clean the SA fly-line. I've
tried
the SA cleaning pads and I find them to work pretty well. Instructions said
you can clean the line with the SA pads wet or dry. I have been cleaning
the fly-line using the pads for about 2 months now, and the coating seems
to be intact and working fine, as well as the cleaning and making the fly
line slick.

I read your link on the threads of cleaning fly-line. I believe you said
not to use anything abrasive, as it could strip off the coating off the
line.
-tom



  #3  
Old March 28th, 2007, 07:10 PM posted to rec.outdoors.fishing.fly
Scott Seidman
external usenet poster
 
Posts: 1,037
Default Armor all

"Tom Nakashima" wrote in
:

I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA
and spoke
with the tech department about cleaning and dressing fly-lines. One
of the tech's told me it's ok to use Armor All on the line after it's
been cleaned. He further said there is no need to use a dressing if I
use the SA cleaning pads, as it is the only thing that I needed to
clean the SA fly-line. I've


http://solutions.3m.com/wps/portal/3...c_Anglers/Fly-
Fishing/Scientific_Anglers/Technology/BetterCores/

SA claims the lines are "maintenance-free".

--
Scott
Reverse name to reply
  #4  
Old March 28th, 2007, 07:23 PM posted to rec.outdoors.fishing.fly
MC
external usenet poster
 
Posts: 53
Default Armor all

Tom Nakashima wrote:
wrote in message
oups.com...
Why you should not use armor-all on some lines;

http://www.flyforums.co.uk/showthread.php?t=8733

TL
MC


Greetings again Mike,
I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA and
spoke
with the tech department about cleaning and dressing fly-lines. One of the
tech's told me it's ok to use Armor All on the line after it's been cleaned.
He further said there is no need to use a dressing if I use the SA cleaning
pads, as it is the only thing that I needed to clean the SA fly-line. I've
tried
the SA cleaning pads and I find them to work pretty well. Instructions said
you can clean the line with the SA pads wet or dry. I have been cleaning
the fly-line using the pads for about 2 months now, and the coating seems
to be intact and working fine, as well as the cleaning and making the fly
line slick.

I read your link on the threads of cleaning fly-line. I believe you said
not to use anything abrasive, as it could strip off the coating off the
line.
-tom




It is better to stick to the manufacturer´s instructions regarding
maintenance and cleaning of fly-lines.

Putting Armor-all on intermediate lines makes them float on the surface
film.

Putting it on floating lines makes them slicker for a while, but it
wears off quickly, and it will not make them float any better, because
such lines float intrinsically, being positively buoyant. The PVC
coating is filled with tiny glass bubbles containing air.

Abrasive substances like Fuller´s earth damage the line coating.

Quite a few people use various things to "improve" line performance.
many of these things are actually detrimental, although this may not be
obvious in the short term. Quiet a few distance casters use silicone
oil to polish their lines before a competition, and this does improve
the shooting qualities, but only temporarily, and is not advisable when
fishing, as the effects on the line may also be detrimental, such as
leaching plasticisers, or attacking the PVC.

I wash most of my lines in warm soapy water after a trip, and on some I
use Cortland line dressing, applied sparingly, and polished off with a
soft cloth.

TL
MC
  #5  
Old March 28th, 2007, 07:27 PM posted to rec.outdoors.fishing.fly
Tom Nakashima
external usenet poster
 
Posts: 792
Default Armor all


"Scott Seidman" wrote in message
. 1.4...
"Tom Nakashima" wrote in
:

I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA
and spoke
with the tech department about cleaning and dressing fly-lines. One
of the tech's told me it's ok to use Armor All on the line after it's
been cleaned. He further said there is no need to use a dressing if I
use the SA cleaning pads, as it is the only thing that I needed to
clean the SA fly-line. I've


http://solutions.3m.com/wps/portal/3...c_Anglers/Fly-
Fishing/Scientific_Anglers/Technology/BetterCores/

SA claims the lines are "maintenance-free".

--
Scott
Reverse name to reply


Greetings Scott,
I guess I take this as, no line is maintenance-free, it's going to have to
be
cleaned depended on usage.
thanks,
-tom


  #6  
Old March 28th, 2007, 07:35 PM posted to rec.outdoors.fishing.fly
Scott Seidman
external usenet poster
 
Posts: 1,037
Default Armor all

"Tom Nakashima" wrote in
:

I guess I take this as, no line is maintenance-free, it's going to
have to be
cleaned depended on usage.



All lines should be kept clean. You don't need anything other than soapy
water to do this.

--
Scott
Reverse name to reply
  #7  
Old March 28th, 2007, 07:35 PM posted to rec.outdoors.fishing.fly
Tom Nakashima
external usenet poster
 
Posts: 792
Default Armor all


"MC" wrote in message
...
Tom Nakashima wrote:
wrote in message
oups.com...
Why you should not use armor-all on some lines;

http://www.flyforums.co.uk/showthread.php?t=8733

TL
MC


Greetings again Mike,
I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA and
spoke
with the tech department about cleaning and dressing fly-lines. One of
the
tech's told me it's ok to use Armor All on the line after it's been
cleaned.
He further said there is no need to use a dressing if I use the SA
cleaning
pads, as it is the only thing that I needed to clean the SA fly-line. I've
tried
the SA cleaning pads and I find them to work pretty well. Instructions
said
you can clean the line with the SA pads wet or dry. I have been cleaning
the fly-line using the pads for about 2 months now, and the coating seems
to be intact and working fine, as well as the cleaning and making the fly
line slick.

I read your link on the threads of cleaning fly-line. I believe you said
not to use anything abrasive, as it could strip off the coating off the
line.
-tom



It is better to stick to the manufacturer´s instructions regarding
maintenance and cleaning of fly-lines.

Putting Armor-all on intermediate lines makes them float on the surface
film.

Putting it on floating lines makes them slicker for a while, but it
wears off quickly, and it will not make them float any better, because
such lines float intrinsically, being positively buoyant. The PVC
coating is filled with tiny glass bubbles containing air.

Abrasive substances like Fuller´s earth damage the line coating.

Quite a few people use various things to "improve" line performance.
many of these things are actually detrimental, although this may not be
obvious in the short term. Quiet a few distance casters use silicone
oil to polish their lines before a competition, and this does improve
the shooting qualities, but only temporarily, and is not advisable when
fishing, as the effects on the line may also be detrimental, such as
leaching plasticisers, or attacking the PVC.

I wash most of my lines in warm soapy water after a trip, and on some I
use Cortland line dressing, applied sparingly, and polished off with a
soft cloth.

TL
MC

Thanks Mike,
sounds like soapy water seems like the safest to use. I think SA also has
their line cleaner as well. I was sort of reluctant to use the SA pads at
first,
thinking it would strip off the coating, as you said. But I looked at the
line
coating with a microscope after I used the pad and I didn't see a difference
between the end of the line close to the backing which hasn't been touched
and the line which I used the SA pads.
-tom


  #8  
Old March 28th, 2007, 07:41 PM posted to rec.outdoors.fishing.fly
MC
external usenet poster
 
Posts: 53
Default Armor all

Tom Nakashima wrote:
"MC" wrote in message
...
Tom Nakashima wrote:
wrote in message
oups.com...
Why you should not use armor-all on some lines;

http://www.flyforums.co.uk/showthread.php?t=8733

TL
MC

Greetings again Mike,
I'm still confused on the Armor All issue.
I'm using Scientific Anglers fly-line, (floating line). I called SA and
spoke
with the tech department about cleaning and dressing fly-lines. One of
the
tech's told me it's ok to use Armor All on the line after it's been
cleaned.
He further said there is no need to use a dressing if I use the SA
cleaning
pads, as it is the only thing that I needed to clean the SA fly-line. I've
tried
the SA cleaning pads and I find them to work pretty well. Instructions
said
you can clean the line with the SA pads wet or dry. I have been cleaning
the fly-line using the pads for about 2 months now, and the coating seems
to be intact and working fine, as well as the cleaning and making the fly
line slick.

I read your link on the threads of cleaning fly-line. I believe you said
not to use anything abrasive, as it could strip off the coating off the
line.
-tom



It is better to stick to the manufacturer´s instructions regarding
maintenance and cleaning of fly-lines.

Putting Armor-all on intermediate lines makes them float on the surface
film.

Putting it on floating lines makes them slicker for a while, but it
wears off quickly, and it will not make them float any better, because
such lines float intrinsically, being positively buoyant. The PVC
coating is filled with tiny glass bubbles containing air.

Abrasive substances like Fuller´s earth damage the line coating.

Quite a few people use various things to "improve" line performance.
many of these things are actually detrimental, although this may not be
obvious in the short term. Quiet a few distance casters use silicone
oil to polish their lines before a competition, and this does improve
the shooting qualities, but only temporarily, and is not advisable when
fishing, as the effects on the line may also be detrimental, such as
leaching plasticisers, or attacking the PVC.

I wash most of my lines in warm soapy water after a trip, and on some I
use Cortland line dressing, applied sparingly, and polished off with a
soft cloth.

TL
MC

Thanks Mike,
sounds like soapy water seems like the safest to use. I think SA also has
their line cleaner as well. I was sort of reluctant to use the SA pads at
first,
thinking it would strip off the coating, as you said. But I looked at the
line
coating with a microscope after I used the pad and I didn't see a difference
between the end of the line close to the backing which hasn't been touched
and the line which I used the SA pads.
-tom



If a manufacturer offers such materials for line cleaning, then it is
most unlikely that they will damage the line.

However, as Mr Seidmann pointed out, soapy water and a good rinse is
sufficient for plastic lines.

TL
MC
  #9  
Old March 28th, 2007, 07:44 PM posted to rec.outdoors.fishing.fly
Tom Nakashima
external usenet poster
 
Posts: 792
Default Armor all


"Scott Seidman" wrote in message
. 1.4...
"Tom Nakashima" wrote in
:

I guess I take this as, no line is maintenance-free, it's going to
have to be
cleaned depended on usage.



All lines should be kept clean. You don't need anything other than soapy
water to do this.

--
Scott
Reverse name to reply


Sounds like you're right Scott,
I figure anything abrasive has to cut the coating at sometime.
Oh, when you say soapy water, I take it you mean mild dish-washing
detergent?
-tom


  #10  
Old March 28th, 2007, 07:54 PM posted to rec.outdoors.fishing.fly
Scott Seidman
external usenet poster
 
Posts: 1,037
Default Armor all

"Tom Nakashima" wrote in
:


"Scott Seidman" wrote in message
. 1.4...
"Tom Nakashima" wrote in
:

I guess I take this as, no line is maintenance-free, it's going to
have to be
cleaned depended on usage.



All lines should be kept clean. You don't need anything other than
soapy water to do this.

--
Scott
Reverse name to reply


Sounds like you're right Scott,
I figure anything abrasive has to cut the coating at sometime.
Oh, when you say soapy water, I take it you mean mild dish-washing
detergent?
-tom




Yeah, some Dawn or something. Strip the line, agitate it in a bucket of
soapy water for a bit, and wipe it off. Repeat it in fresh water. The
only thing to watch out for is actually abrading the line with any dirt
that's on the line when you're cleaning it off.

--
Scott
Reverse name to reply
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brown Hoplo (Armor Plated Catfish) Caught in Florida Jeff Catfish Fishing 0 September 28th, 2005 09:45 PM


All times are GMT +1. The time now is 09:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 FishingBanter.
The comments are property of their posters.