![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I've been having some trouble with larger fish getting off the hook. I
had 2 tournaments a few weeks ago (Saturday and Sunday) and at the end of each I lost a 3 and 4 pounder respectively. Both were caught on 5" T-rigged Senkos with Gammie EWG #3 hooks on 10lb mono and at the far end of a long cast. Both jumped a couple of times and shook the hook. At first I blamed the mono for stretching and not giving me a solid enough hookset. Then this past Friday night I hit a local reservoir to do some midnight fishing. I had the same rod and reel but I respooled with 10 lb. Power Pro (which I love BTW) to eliminate stretch. Well first I bag a 2.5 pound smallie and soon after a 3 pound LM. A half hour later, I get a hit and set the hook and buzzzzz, the drag starts going. It was a BIG bass (at least for NJ) and in the shadows it looked like an oversized football when it jumped (3 times). Recently I've hooked a few 4 pounders and this was clearly quite a bit larger. By the fight I'd say well over 5 or maybe 6 pounds, who really knows. Anyway, after a minute of fighting and a few jumps this one also throws the hook. Now I don't know what to think. What am I missing? In the past I rarely lost fish, but I've gotten better at finding them and I've been hooking bigger ones lately. Is this just par for the course with bigger bass, you just lose some? Or should I be doing something else? I'm not letting the pressure off when they jump and the hook comes flying back at me, should I be easing up? Should I be clamping down more? Am I fighting them too hard and opening a hole in their mouths? Any help would be great. Rich P |
#2
|
|||
|
|||
![]() "Rich P" wrote in message news ![]() I've been having some trouble with larger fish getting off the hook. I had 2 tournaments a few weeks ago (Saturday and Sunday) and at the end of each I lost a 3 and 4 pounder respectively. Both were caught on 5" T-rigged Senkos with Gammie EWG #3 hooks on 10lb mono and at the far end of a long cast. Both jumped a couple of times and shook the hook. At first I blamed the mono for stretching and not giving me a solid enough hookset. Then this past Friday night I hit a local reservoir to do some midnight fishing. I had the same rod and reel but I respooled with 10 lb. Power Pro (which I love BTW) to eliminate stretch. Well first I bag a 2.5 pound smallie and soon after a 3 pound LM. A half hour later, I get a hit and set the hook and buzzzzz, the drag starts going. It was a BIG bass (at least for NJ) and in the shadows it looked like an oversized football when it jumped (3 times). Recently I've hooked a few 4 pounders and this was clearly quite a bit larger. By the fight I'd say well over 5 or maybe 6 pounds, who really knows. Anyway, after a minute of fighting and a few jumps this one also throws the hook. Now I don't know what to think. What am I missing? In the past I rarely lost fish, but I've gotten better at finding them and I've been hooking bigger ones lately. Is this just par for the course with bigger bass, you just lose some? Or should I be doing something else? I'm not letting the pressure off when they jump and the hook comes flying back at me, should I be easing up? Should I be clamping down more? Am I fighting them too hard and opening a hole in their mouths? Any help would be great. My first thought was that with mono, you weren't getting an adequate hookset on a long cast, and I still think that. That's one of the reasons why I don't use mono line any longer. Now that you're using PowerPro, there are a couple things that you need to remember. First of all, because you have almost zero stretch, you don't need that mongo hookset any longer, just a quick snap of the wrist. Anything more and you risk tearing a large hole in the fish's jaw. When I started using superlines, I lost a lot of fish and couldn't understand why. Then I started landing fish (barely) that had a 2 inch tear in the jaw. A simple wrist snap hookset reduced the problem a lot. Jumping fish will toss hooks. It seems that when you really put the screws to a bass, they jump. If you can avoid putting extreme pressure on them, they'll stay down, reducing the risk of jumping. Also, hold the rod parallel to the water while fighting a large bass seems to reduce their jumping somewhat. Heavy bass can put a lot of pressure on the line/hooks too. A surge by the bass can tear a large, gaping hole, releasing the hooks too. With casting gear, I have the drag clamped down tight on hooksets, then after the fish is on, I'll either back off the drag a little bit (1/8th turn) or pop the reel out of gear and use my thumb as a drag. With spinning tackle, I have the drag set so there's a little slip on the hookset or backreel when needed to reduce the pressure so the fish don't pull free. These things have helped reduce the number of lost fish. But remember, things happen and you're not going to win them all. -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
#3
|
|||
|
|||
![]()
1st- what kind of rod are you using?
2nd- trailer hook on the buzzbait? 3rd- Keep the rod down to keep the fish from jumping. 4th- If your not fishing tons of thick stuff with the senkos, consider adding a small treble to the hook 5th- Want some practice with the hookset? Come on up. "Rich P" wrote in message news ![]() I've been having some trouble with larger fish getting off the hook. I had 2 tournaments a few weeks ago (Saturday and Sunday) and at the end of each I lost a 3 and 4 pounder respectively. Both were caught on 5" T-rigged Senkos with Gammie EWG #3 hooks on 10lb mono and at the far end of a long cast. Both jumped a couple of times and shook the hook. At first I blamed the mono for stretching and not giving me a solid enough hookset. Then this past Friday night I hit a local reservoir to do some midnight fishing. I had the same rod and reel but I respooled with 10 lb. Power Pro (which I love BTW) to eliminate stretch. Well first I bag a 2.5 pound smallie and soon after a 3 pound LM. A half hour later, I get a hit and set the hook and buzzzzz, the drag starts going. It was a BIG bass (at least for NJ) and in the shadows it looked like an oversized football when it jumped (3 times). Recently I've hooked a few 4 pounders and this was clearly quite a bit larger. By the fight I'd say well over 5 or maybe 6 pounds, who really knows. Anyway, after a minute of fighting and a few jumps this one also throws the hook. Now I don't know what to think. What am I missing? In the past I rarely lost fish, but I've gotten better at finding them and I've been hooking bigger ones lately. Is this just par for the course with bigger bass, you just lose some? Or should I be doing something else? I'm not letting the pressure off when they jump and the hook comes flying back at me, should I be easing up? Should I be clamping down more? Am I fighting them too hard and opening a hole in their mouths? Any help would be great. Rich P |
#4
|
|||
|
|||
![]()
No buzzbzit, the buzzzzz was the sound of the drag (my theatrics). And I'm
using a Shimano Compre' rod (medium action fast taper 7'). Again it was a Senko T-rigged. I don't believe hookset is the problem, I'm sure the hook penetrated that last fish, there was too much pressure for it not to I think. Rich P "alwaysfishking" wrote in message ... 1st- what kind of rod are you using? 2nd- trailer hook on the buzzbait? 3rd- Keep the rod down to keep the fish from jumping. 4th- If your not fishing tons of thick stuff with the senkos, consider adding a small treble to the hook 5th- Want some practice with the hookset? Come on up. "Rich P" wrote in message news ![]() I've been having some trouble with larger fish getting off the hook. I had 2 tournaments a few weeks ago (Saturday and Sunday) and at the end of each I lost a 3 and 4 pounder respectively. Both were caught on 5" T-rigged Senkos with Gammie EWG #3 hooks on 10lb mono and at the far end of a long cast. Both jumped a couple of times and shook the hook. At first I blamed the mono for stretching and not giving me a solid enough hookset. Then this past Friday night I hit a local reservoir to do some midnight fishing. I had the same rod and reel but I respooled with 10 lb. Power Pro (which I love BTW) to eliminate stretch. Well first I bag a 2.5 pound smallie and soon after a 3 pound LM. A half hour later, I get a hit and set the hook and buzzzzz, the drag starts going. It was a BIG bass (at least for NJ) and in the shadows it looked like an oversized football when it jumped (3 times). Recently I've hooked a few 4 pounders and this was clearly quite a bit larger. By the fight I'd say well over 5 or maybe 6 pounds, who really knows. Anyway, after a minute of fighting and a few jumps this one also throws the hook. Now I don't know what to think. What am I missing? In the past I rarely lost fish, but I've gotten better at finding them and I've been hooking bigger ones lately. Is this just par for the course with bigger bass, you just lose some? Or should I be doing something else? I'm not letting the pressure off when they jump and the hook comes flying back at me, should I be easing up? Should I be clamping down more? Am I fighting them too hard and opening a hole in their mouths? Any help would be great. Rich P |
#5
|
|||
|
|||
![]()
"Rich P" wrote in message
news ![]() First off I have had terrible luck with t-rigging senkos. The bait just slides out of their mouth for me on the hook set, and then when I do get a hook up it seems to be a skin hook. I think I'll fish them on offset worm hooks instead of in-line hooks when t-rigging from now on. It seems to help with other baits. In fact I think I'll try offset worm hooks for everything except the heaviest cover flipping from now on. Now here is the what I have noticed. Most senko fish seem to hit on the initial drop. If I crank down and hit them hard I tend to hook them up pretty good, but a lot of times I am reeling in my bait and I notice it is heavy. I set the hook and often lose the fish somewhere on the retrieve. I think what happened is either the fish felt the gentle pressure of a normal retrieve and just went with the flow, or they chased the bait to take it. In either case they are facing when I set the hook. The bait can slip out, and they are probably traveling towards me when I set the hook thereby reducing my hooksetting force. If I don't feel a solid thump when I set the hook I crank down and set it again. I don't have much drag at any time. If the drag slips when I set the hook I knw I got as good a hookset as I am going to get. I fish witht he drag set so a 1.5 buck bass will strip a little drag on his hardest runs, and a 2+ will strip drag on runs. If I need more pressure to kkeeep them out of the weeds I use my thumb and the instant they turn even a little bit I back off the thumb pressure. Now bear in mind my experience is limited from what some of the other regulars can offer, but I did exactly this on saturday to boat a 5.5 for 2nd place big fish in a Desert Bass tourney on saturday. I was tossing blind to a deep channel. When I started to take up slack I noticed there was more slack than I though there should be. I cranked up as much as I dared and set the hook hard. The linedrag didn't slip, and I didn't feel a solid thump. I cranked down (keeping pressure on her) and hit her again. I still didn't get a solid thump, but I was afraid to try it again for fear that I had a skin hook in her. She headed for the tulies and I applied gently pressure with my thumb. She turned and dived under the boat. I let her run a little and then thumbed her a bit while I unwrapped the line from around the trolling motor. She made three or four runs back under the boat before my son managed to get a net under here. She was hooks solidly, but was not torn. I have to say, that I was wacky rigging, and she had the hook through a bony plate in the roof of her mouth. I can't say since there is no camera on the hook, but that second hookset may have been what saved that fish. I barely felt any pressure ont he first hookset. I can't imagine it was enough to drive that hook home through that boney plate. Don't go thinking a second hookset needs to be done all the time. Its does not. In fact most times a second hook set will risk tearing a big hole and losing fish. I ONLY do it on those occassions where I am fishing plastics, and I am not comfortable with the initial hookset. -- Bob La Londe Win a Tackle Pack Jig Fishing - Tips and Techniques Contest Courtesy of Siebler Custom Baits http://www.YumaBassMan.com |
#6
|
|||
|
|||
![]()
I'll bet it's one of two things (three actually) Rich;
1) Your rod is too light & not sufficient for sticking hard-mouthed bass. 2) Your hookset needs a revamping. 3) You're having some bad luck. You couldn't be overfighting the fish because if you overfight a 6# bass on 10# mono your lines gonna break. A properly-set drag makes overfighting a non-factor. Stretching mono forgives angler mistakes after the hookset, it doesn't cause it. Mono may break as the result of stretch on a hard hookset, but stretch wont cause a hook to pull-out during a battle. You're generally so close to your fish in most bassin situations that stretch wont be a factor with 10# mono anyway. Make sure there's not much slack in your line before setting the hook. Id bet either you're not getting a good set, or that you're using a bit of a "whimpy" rod. I'm amazed at how many guys I see bass fishing with trout tackle. Warren "Rich P" wrote in message news ![]() I've been having some trouble with larger fish getting off the hook. I had 2 tournaments a few weeks ago (Saturday and Sunday) and at the end of each I lost a 3 and 4 pounder respectively. Both were caught on 5" T-rigged Senkos with Gammie EWG #3 hooks on 10lb mono and at the far end of a long cast. Both jumped a couple of times and shook the hook. At first I blamed the mono for stretching and not giving me a solid enough hookset. Then this past Friday night I hit a local reservoir to do some midnight fishing. I had the same rod and reel but I respooled with 10 lb. Power Pro (which I love BTW) to eliminate stretch. Well first I bag a 2.5 pound smallie and soon after a 3 pound LM. A half hour later, I get a hit and set the hook and buzzzzz, the drag starts going. It was a BIG bass (at least for NJ) and in the shadows it looked like an oversized football when it jumped (3 times). Recently I've hooked a few 4 pounders and this was clearly quite a bit larger. By the fight I'd say well over 5 or maybe 6 pounds, who really knows. Anyway, after a minute of fighting and a few jumps this one also throws the hook. Now I don't know what to think. What am I missing? In the past I rarely lost fish, but I've gotten better at finding them and I've been hooking bigger ones lately. Is this just par for the course with bigger bass, you just lose some? Or should I be doing something else? I'm not letting the pressure off when they jump and the hook comes flying back at me, should I be easing up? Should I be clamping down more? Am I fighting them too hard and opening a hole in their mouths? Any help would be great. Rich P |
#7
|
|||
|
|||
![]()
Two things I can think of to try. One would be that once you set the
hook on a long cast, set the hook with a strong pull along with quickly reeling rather than a flipping type hookset whre you really haul back. This may help stop some tearing. The second thing is your hook. I know that offset hook is popular with many anglers, but I have found that that extra bend that keeps the bait from sliding down the hook also will start to blow the fish's mouth open as the hook is set. When carolina rigging or most soft plastic fishing for that matter with a few exceptions, I have switched to using a straight shank hook! It works much better than if you are fishing that Senko on top with a twitch action. The slow pulls with the carolina will not be so apt to pull the bait down the hook. Pegging through the hook eye and nose of the bait with a tooth pick will also help a lot if your bait tends to bunch up on the cast. If necessary, fishing glue applid to this area will help alot. When I first started fishing the upper level of tournaments, I ran into very much the same problem and was helped out by the big boys. Also consider the size of your hook. The bait you are fishing should fit 3 times in the bend of the hook between the straight shank and the barb of the hook. |
#8
|
|||
|
|||
![]()
Rich P wrote:
I've been having some trouble with larger fish getting off the hook. Check your email. |
#9
|
|||
|
|||
![]()
Thanks everyone, especially Rich Z who contacted me directly with good
advice. Rich P |
#10
|
|||
|
|||
![]() "go-bassn" wrote in message ... I'll bet it's one of two things (three actually) Rich; So where the heck have you been? It's been awfully quiet from you since before I went to Africa. I moved the NWC from Boom Lake to Lake Mohawksin so you'd have a "lake with bass in it", tell me you're coming. We've got more than enough boats so you can come on out and see how you fare on different water. -- Steve @ OutdoorFrontiers http://www.outdoorfrontiers.com G & S Guide Service and Custom Rods http://www.herefishyfishy.com |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
2006 Bassmaster Classic Coming to Toho in February | Fishman | Bass Fishing | 0 | June 23rd, 2005 10:34 PM |
Keep those trip reports coming. | Wayne Knight | Fly Fishing | 25 | May 20th, 2005 04:48 AM |
Bucket full "0"fun reminder...April 17th coming soon call 386-445-4788 for info. | Allen | General Discussion | 0 | April 8th, 2004 03:09 AM |
Ad: Rodbuilding "How-To" DVD - Coming SOON! | Scimitar Video | Fly Fishing | 0 | February 11th, 2004 02:02 AM |
Ad: Rodbuilding "How-To" DVD - Coming SOON! | Scimitar Video | Fishing in Canada | 0 | February 11th, 2004 02:02 AM |