![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Is it possible to adjust a console mounted fuel gauge for greater
accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN |
#2
|
|||
|
|||
![]()
Send me a picture of this thing if you have one, I thought I was the only
Mon Arc boat owner around. "Guy F. Anderson Sr." wrote in message ... Is it possible to adjust a console mounted fuel gauge for greater accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN |
#3
|
|||
|
|||
![]()
The word ARK ought to have some meaning.... lol.
"Jerry Barton" wrote in message news:4NOdnQqYcIjRRkPenZ2dnUVZ_vidnZ2d@wideopenwest .com... Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. "Guy F. Anderson Sr." wrote in message ... Is it possible to adjust a console mounted fuel gauge for greater accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN |
#4
|
|||
|
|||
![]()
What you say Willis???
"Charles B. Summers" wrote in message . .. The word ARK ought to have some meaning.... lol. "Jerry Barton" wrote in message news:4NOdnQqYcIjRRkPenZ2dnUVZ_vidnZ2d@wideopenwest .com... Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. "Guy F. Anderson Sr." wrote in message ... Is it possible to adjust a console mounted fuel gauge for greater accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN |
#5
|
|||
|
|||
![]()
Now THAT is funny...
WW "Charles B. Summers" wrote in message . .. The word ARK ought to have some meaning.... lol. "Jerry Barton" wrote in message news:4NOdnQqYcIjRRkPenZ2dnUVZ_vidnZ2d@wideopenwest .com... Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. "Guy F. Anderson Sr." wrote in message ... Is it possible to adjust a console mounted fuel gauge for greater accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN |
#6
|
|||
|
|||
![]()
On Mon, 30 Jan 2006 22:36:45 -0500, "Jerry Barton"
wrote: Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. Jerry-- I have not forgotten re sending pics. Will do when I can take some decent ones. Mine is a 1996 Pro 170, and has held up very well to shallow water abuse--not even a leaky rivet yet. Guy A Ripley, TN |
#7
|
|||
|
|||
![]()
www.jerrys-world.com/MyBoat.jpg
"Guy F. Anderson Sr." wrote in message ... On Mon, 30 Jan 2006 22:36:45 -0500, "Jerry Barton" wrote: Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. Jerry-- I have not forgotten re sending pics. Will do when I can take some decent ones. Mine is a 1996 Pro 170, and has held up very well to shallow water abuse--not even a leaky rivet yet. Guy A Ripley, TN |
#8
|
|||
|
|||
![]()
SON! That thing is still floatin???
WW;-) "Jerry Barton" wrote in message ... www.jerrys-world.com/MyBoat.jpg "Guy F. Anderson Sr." wrote in message ... On Mon, 30 Jan 2006 22:36:45 -0500, "Jerry Barton" wrote: Send me a picture of this thing if you have one, I thought I was the only Mon Arc boat owner around. Jerry-- I have not forgotten re sending pics. Will do when I can take some decent ones. Mine is a 1996 Pro 170, and has held up very well to shallow water abuse--not even a leaky rivet yet. Guy A Ripley, TN |
#9
|
|||
|
|||
![]() "Guy F. Anderson Sr." wrote in message ... Is it possible to adjust a console mounted fuel gauge for greater accuracy? My tank is an 18 gallon plastic, builtin, on 17 ft. Monark Pro 170 with a 50 hp Mercury 2-stroke. It reads "Empty" with 14 or 15 gallons left in the tank!! I'd like to avoid disassembling the tank to get to the internal float or sensor because its well beneath the rear deck. I'm hoping there's a simple external calibration adjuster of some sort.... Thanks! Guy A Ripley, TN I don't have this boat, but I have had the problem. Unfortunately, you're going to need a new sending unit, in all likelihood. Luckily, mine was in a G3 Pro 175, and the rear of the fuel tank is accessible through the back hatch (where the batts and bilge pump are) so it was an easy fix. I too tried to find an easier fix (since I don't like messing with gassy sending units at all) and even tried replacing the gauge first, but it didn't function properly until I replaced the whole float/sending unit back in the tank. |
#10
|
|||
|
|||
![]()
On Tue, 31 Jan 2006 22:11:58 GMT, "SimRacer"
wrote: I don't have this boat, but I have had the problem. Unfortunately, you're going to need a new sending unit, in all likelihood. Yep, I think you are right, a job I may slide off to the dealer, since that part of the tqnk is pretty well buried beneath the rear deck. Thanks for the response! Guy A Ripley, TN |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Simple gauge malfunction? Or is she getting ready to blow? | Scott Brown | Bass Fishing | 2 | February 20th, 2005 03:20 PM |
Rocket Fuel Lube | Peter Yi | Fishing in Canada | 1 | January 1st, 2005 02:28 AM |
Truck Fuel economy (OT from other thread) | riverman | Fly Fishing | 22 | November 8th, 2004 12:35 PM |
Fuel Costs? | Steve @ OutdoorFrontiers | Bass Fishing | 9 | April 19th, 2004 06:26 PM |
johnson o/b fuel consumption estimate | RB | Bass Fishing | 1 | March 31st, 2004 10:08 PM |