![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
This seems to be a sad case. Is this NG defunct?
If not then tell me all about pennel rigs and maybe could educate anyone who is interested in worming. Tight lines -- Alec Powell Watlington Oxon. UK Fishing the Thame, Windrush and the Thames Web Pages: http://www.prole.demon.co.uk/ |
#2
|
|||
|
|||
![]()
it appears to be, i have been checking for a while and nothing but these
posts that are nothing to do with fishing. "Alec Powell" wrote in message ... This seems to be a sad case. Is this NG defunct? If not then tell me all about pennel rigs and maybe could educate anyone who is interested in worming. Tight lines -- Alec Powell Watlington Oxon. UK Fishing the Thame, Windrush and the Thames Web Pages: http://www.prole.demon.co.uk/ |
#3
|
|||
|
|||
![]() "Alec Powell" wrote in message ... This seems to be a sad case. Is this NG defunct? If not then tell me all about pennel rigs and maybe could educate anyone who is interested in worming. Tight lines -- Alec Powell Watlington Oxon. UK Fishing the Thame, Windrush and the Thames Web Pages: http://www.prole.demon.co.uk/ Pennell rig? Get over to UK.rec.fishing.sea and I'll give you some info... or seeing you have my number, gissa call. We may even get out fishing ;o) ATB Andy |
#4
|
|||
|
|||
![]()
In article , Alec Powell
wrote: This seems to be a sad case. Is this NG defunct? It'll pick up as the nights close in. Almost all of the off-topic posts are just one troll using as many as six simultaneous IDs and forged headers so next time his medication is updated and he goes quiet for a while we'll probably see some more on topic posts. If not then tell me all about pennel rigs and maybe could educate anyone who is interested in worming. I don't use pennels for coarse fishing worming - rarely for worming at all except where frequent, repeated casting is needed. Use a good sized hook appropriate to the size of bait and a line capable of driving it home. I haven't tried circle hooks for coarse fishing with worms yet but I'd expect them to be a useful addition to the armoury. What prompted the question? Cheerio, -- Fishing: http://www.fishing.casterbridge.net/ Writing: http://www.author.casterbridge.net/derek-moody/ uk.rec.fishing.game Badge Page: http://www.fishing.casterbridge.net/urfg/ |
#5
|
|||
|
|||
![]()
On Sat, 29 Sep 2007, Derek Moody, gave forth these words of wisdom:
What prompted the question? Without boring anyone senseless with this reply, I find that doing my autumn digging on my allotment I am the proud owner of enormous amounts of both reds, brandlings and lobs. Consequently the chub and perch on my little stretch of the Thame here in Oxfordshire are very happy in the partaking of same. Now you tell me...........how the hell do you keep said wurrrm on a size 8 barbless hook for more than one cast? Consequently the request of info on pennel rigs. Any ideas? BTW Derek, down your way tomorrow, (Sherbourne - Dorset), might take a bit of tackle with me. We live in hope:-) Cheerio, Alec -- Alec Powell (Waiting for the Great Leap Forwards) Watlington Oxfordshire UK |
#6
|
|||
|
|||
![]() "Alec Powell" wrote in message ... On Sat, 29 Sep 2007, Derek Moody, gave forth these words of wisdom: What prompted the question? Without boring anyone senseless with this reply, I find that doing my autumn digging on my allotment I am the proud owner of enormous amounts of both reds, brandlings and lobs. Consequently the chub and perch on my little stretch of the Thame here in Oxfordshire are very happy in the partaking of same. Now you tell me...........how the hell do you keep said wurrrm on a size 8 barbless hook for more than one cast? Consequently the request of info on pennel rigs. Any ideas? BTW Derek, down your way tomorrow, (Sherbourne - Dorset), might take a bit of tackle with me. We live in hope:-) Cheerio, Alec -- Alec Powell (Waiting for the Great Leap Forwards) Watlington Oxfordshire UK Hi Alec, Sorry for the previous reply, but when I saw Pennell Rig I thought you were off sea fishing again and posted to the wrong group. Just thought the dementia was kicking in again ![]() Must admit, I've never used one myself for worms when course fishing, but then again, I've not used them with barbless hooks. (BTW, I've seen smaller barbless hooks with a flattened piece just below the point. The idea to stop maggots coming off. Don't know if these are available on larger hooks?) If you want to try a Pennell Rig, then this is how I would do it based upon when I've used them sea fishing. Other anglers here may suggest an alternative/better method: I would use a smaller hook as the top hook (perhaps a size 14 or 12 maybe?). Begin by sliding the small hook onto the line first, then tie on the larger hook (so the smaller hook is running free). Then put the worm onto the main hook and slide down the smaller hook so it's lined up with the head of the worm. Wrap the line around the shank of the smaller hook about 3 or 4 times to effectively lock it in place although it will slide a bit (perhaps more wraps because of the thinner line maybe?) Put the head of the worm on the smaller hook. Well.... that's the theory... practice will/may tell. Good luck, Andy |
#7
|
|||
|
|||
![]() "Andy Lawson" wrote in message ... "Alec Powell" wrote in message ... On Sat, 29 Sep 2007, Derek Moody, gave forth snip alternative/better method: I would use a smaller hook as the top hook (perhaps a size 14 or 12 maybe?). Begin by sliding the small hook onto the line first, then tie on the larger hook (so the smaller hook is running free). Then put the worm onto the main hook and slide down the smaller hook so it's lined up with the head of the worm. Wrap the line around the shank of the smaller hook about 3 or 4 times to effectively lock it in place although it will slide a bit (perhaps more wraps because of the thinner line maybe?) Put the head of the worm on the smaller hook. Well.... that's the theory... practice will/may tell. Good luck, Andy good idea, but i find that it is often better to tie the upper hook using a knotless knot as if to make a boiley rig allow app size of your shortest worms then allow the excess worm to fall below the bottom hook. This way there is no slipping and '2' bite points for those larger fish that come take on the down rather than from the bottom. A 14 barbed for the top hook will be perfect, or at least it is for me. may your line stay tight and your arms be aching ![]() Daz |
#8
|
|||
|
|||
![]()
In article , Alec Powell
wrote: On Sat, 29 Sep 2007, Derek Moody, gave forth these words of wisdom: What prompted the question? Without boring anyone senseless with this reply, I find that doing my autumn digging on my allotment I am the proud owner of enormous amounts of both reds, brandlings and lobs. Consequently the chub and perch on my little stretch of the Thame here in Oxfordshire are very happy in the partaking of same. Now you tell me...........how the hell do you keep said wurrrm on a size 8 barbless hook for more than one cast? Haven't the faintest idea. Use a microbarb and the worm will stay put - and use a size to suit the worm I -have- taken chub on a 6/0... but #4 might be a better starting point. Consequently the request of info on pennel rigs. Any ideas? With small worms the other method is to hook then once through the head and let the whole worm dangle - doesn't work where there are tiddlers about though. BTW Derek, down your way tomorrow, (Sherbourne - Dorset), might take a bit of tackle with me. Oops. A bit too late to point you at the middle Stour - plenty of worm targets there. Cheerio, -- Fishing: http://www.fishing.casterbridge.net/ Writing: http://www.author.casterbridge.net/derek-moody/ uk.rec.fishing.game Badge Page: http://www.fishing.casterbridge.net/urfg/ |
#9
|
|||
|
|||
![]()
In article , Andy Lawson
wrote: "Alec Powell" wrote in message ... both reds, brandlings and lobs. Now you tell me...........how the hell do you keep said wurrrm on a size 8 barbless hook for more than one cast? I would use a smaller hook as the top hook (perhaps a size 14 or 12 maybe?). Begin by sliding the small hook onto the line first, then tie on the larger hook (so the smaller hook is running free). Then put the worm onto the main hook and slide down the smaller hook so it's lined up with the head of the worm. Wrap the line around the shank of the smaller hook about 3 or 4 times to effectively lock it in place although it will slide a bit (perhaps more wraps because of the thinner line maybe?) Put the head of the worm on the smaller hook. The problems arise when a chub swallows a 9" worm in one second flat - both hooks out of sight... At least with a single, even a big single, you have a decent chance with disgorger. You can't cut off the pennel short and leave the hooks to dissolve in the stomach as the connection will ligature the gut :-( Otoh pennels are probably useful for trout and grayling, or any fish that mouth the worm for a while. I mentioned circle hooks upthread but apparently there are problems when trying to thread a worm - they should be ok for big bunches of lobs when you just head hook them. Cheerio, -- Fishing: http://www.fishing.casterbridge.net/ Writing: http://www.author.casterbridge.net/derek-moody/ uk.rec.fishing.game Badge Page: http://www.fishing.casterbridge.net/urfg/ |
Thread Tools | |
Display Modes | |
|
|