![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Thundercat has it right, Ken. Stradic 2500FH. Aluminum Frame and spool.
Steel, cut and polished gears, not aluminum cast. 4 sealed ball bearings and one roller bearing. Stradic reels deliver the goods over the long haul. The inexpensive reels are throwaways as far as I am concerned. Use them a couple of years, maybe, and get rid of them. Then go out and waste money again buying the same inexpensive throwaway reels again and again. I am not saying that the inexpensive reels are not good, I am saying buy it once for the long haul and save more money that way. The Stradic will not disappoint you. "kenneth blevins" wrote in message ... Hello group--- If you were going to buy a good spinning reel to go on a 7' MH rod what would your choice be.I have several lower end spinning reels and thought I'd spring for a better quality reel.Any suggestions and why Thanks for your time Ken Blevins |
#2
|
|||
|
|||
![]()
I think that the Team Daiwa reels are the best bang for the buck. They seem
to hold up better than the Shimano's over the long haul, 10 years or more. I have had both, and had to retire my Stradic way before my SS1300 reels. I bought them used, over 14 years ago, and they are all still working great. The drag is super smooth, and the casting is distance is also unmatched because of the way the line is laid down on the reel. I have the high end Daiwa's, 2 TDZ's, both given to me, both unbelievable. But, you need to start comparing the reels you fish with, with the guns you own. If you spend the money for a few super reals, you will have used them much more often than the shotgun or rifle that you paid a fortune for, and will have many more times the satisfaction from them. Just my opinion.... "Illinois Fisherman" wrote in message y.com... Thundercat has it right, Ken. Stradic 2500FH. Aluminum Frame and spool. Steel, cut and polished gears, not aluminum cast. 4 sealed ball bearings and one roller bearing. Stradic reels deliver the goods over the long haul. The inexpensive reels are throwaways as far as I am concerned. Use them a couple of years, maybe, and get rid of them. Then go out and waste money again buying the same inexpensive throwaway reels again and again. I am not saying that the inexpensive reels are not good, I am saying buy it once for the long haul and save more money that way. The Stradic will not disappoint you. "kenneth blevins" wrote in message ... Hello group--- If you were going to buy a good spinning reel to go on a 7' MH rod what would your choice be.I have several lower end spinning reels and thought I'd spring for a better quality reel.Any suggestions and why Thanks for your time Ken Blevins |
#3
|
|||
|
|||
![]()
Ditto on the Daiwa SS series, I have 2 of the 1300's and just bought a 1600
this season. Allen Allen 911 Bass Anglers Bucks County PA |
#4
|
|||
|
|||
![]()
Want something special for the money? Buy a Cabela Prodigy 2000. It's really
a beefed up Capricorn. It's lighter with more bearings. I have two now. I used to be a die hard Stradic user but I am now completely sold on this Daiwa product. You can get one at Cabelas. Note that the handle in the Capricorn picture is not the 2000 handle. The 2000 handle is nearly identical to the new Stradic 2500. Main features I like: handle assembly air bail smoothness air bail looks air bail drag air bail lack of play overall http://www.cabelas.com/cabelas/en/te...rch&hasJS=true "Chief13amc" wrote in message ... Ditto on the Daiwa SS series, I have 2 of the 1300's and just bought a 1600 this season. Allen Allen 911 Bass Anglers Bucks County PA |
#5
|
|||
|
|||
![]()
Are you comparing today's $340.00 Team Daiwa 1300SS reel to the $120.00
Stradic? Or are you thinking of the $89.00 1300SS Tournament reel available currently. The Daiwa engineers virtually made all of the spinning reel innovations of the past decade, and made some extremely fine reels along the way, but this gentleman is looking for something new in today's market. I was just trying to compare similarly priced good models vs. the less expensive one's available now. Daiwa's Capricorn was made to compete directly with the Shimano Stradic. Prices and features are virtually identical. We as fisherman are getting more knowledgeable and picky about the equipment we choose, and we are willing to invest in the higher end equipment. All the manufactures know this and they are catering to our wants more so every year. $300.00 plus rods $500.00 plus reels for example. My opinion is that most graphite or composite frame reels have the same basic weakness'. The frame can twist under a heavy load and friction wears away graphite load bearing surfaces faster than metal. "schreecher" wrote in message ... I think that the Team Daiwa reels are the best bang for the buck. They seem to hold up better than the Shimano's over the long haul, 10 years or more. I have had both, and had to retire my Stradic way before my SS1300 reels. I bought them used, over 14 years ago, and they are all still working great. The drag is super smooth, and the casting is distance is also unmatched because of the way the line is laid down on the reel. I have the high end Daiwa's, 2 TDZ's, both given to me, both unbelievable. But, you need to start comparing the reels you fish with, with the guns you own. If you spend the money for a few super reals, you will have used them much more often than the shotgun or rifle that you paid a fortune for, and will have many more times the satisfaction from them. Just my opinion.... "Illinois Fisherman" wrote in message y.com... Thundercat has it right, Ken. Stradic 2500FH. Aluminum Frame and spool. Steel, cut and polished gears, not aluminum cast. 4 sealed ball bearings and one roller bearing. Stradic reels deliver the goods over the long haul. The inexpensive reels are throwaways as far as I am concerned. Use them a couple of years, maybe, and get rid of them. Then go out and waste money again buying the same inexpensive throwaway reels again and again. I am not saying that the inexpensive reels are not good, I am saying buy it once for the long haul and save more money that way. The Stradic will not disappoint you. "kenneth blevins" wrote in message ... Hello group--- If you were going to buy a good spinning reel to go on a 7' MH rod what would your choice be.I have several lower end spinning reels and thought I'd spring for a better quality reel.Any suggestions and why Thanks for your time Ken Blevins |
#6
|
|||
|
|||
![]()
I was just comparing the 89.00 SS reals to the Shimano Stradic. Bang for the
buck the SS is up there near the top. "Illinois Fisherman" wrote in message y.com... Are you comparing today's $340.00 Team Daiwa 1300SS reel to the $120.00 Stradic? Or are you thinking of the $89.00 1300SS Tournament reel available currently. The Daiwa engineers virtually made all of the spinning reel innovations of the past decade, and made some extremely fine reels along the way, but this gentleman is looking for something new in today's market. I was just trying to compare similarly priced good models vs. the less expensive one's available now. Daiwa's Capricorn was made to compete directly with the Shimano Stradic. Prices and features are virtually identical. We as fisherman are getting more knowledgeable and picky about the equipment we choose, and we are willing to invest in the higher end equipment. All the manufactures know this and they are catering to our wants more so every year. $300.00 plus rods $500.00 plus reels for example. My opinion is that most graphite or composite frame reels have the same basic weakness'. The frame can twist under a heavy load and friction wears away graphite load bearing surfaces faster than metal. "schreecher" wrote in message ... I think that the Team Daiwa reels are the best bang for the buck. They seem to hold up better than the Shimano's over the long haul, 10 years or more. I have had both, and had to retire my Stradic way before my SS1300 reels. I bought them used, over 14 years ago, and they are all still working great. The drag is super smooth, and the casting is distance is also unmatched because of the way the line is laid down on the reel. I have the high end Daiwa's, 2 TDZ's, both given to me, both unbelievable. But, you need to start comparing the reels you fish with, with the guns you own. If you spend the money for a few super reals, you will have used them much more often than the shotgun or rifle that you paid a fortune for, and will have many more times the satisfaction from them. Just my opinion.... "Illinois Fisherman" wrote in message y.com... Thundercat has it right, Ken. Stradic 2500FH. Aluminum Frame and spool. Steel, cut and polished gears, not aluminum cast. 4 sealed ball bearings and one roller bearing. Stradic reels deliver the goods over the long haul. The inexpensive reels are throwaways as far as I am concerned. Use them a couple of years, maybe, and get rid of them. Then go out and waste money again buying the same inexpensive throwaway reels again and again. I am not saying that the inexpensive reels are not good, I am saying buy it once for the long haul and save more money that way. The Stradic will not disappoint you. "kenneth blevins" wrote in message ... Hello group--- If you were going to buy a good spinning reel to go on a 7' MH rod what would your choice be.I have several lower end spinning reels and thought I'd spring for a better quality reel.Any suggestions and why Thanks for your time Ken Blevins |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Loading new line onto spinning reel | Ian \(remove the antispam\) | General Discussion | 1 | June 22nd, 2004 12:52 AM |
Reel fishermen | allen | General Discussion | 1 | April 17th, 2004 05:04 AM |
spinning reel | Gone Angling | Bass Fishing | 9 | November 4th, 2003 09:51 PM |
Diawa Spinning Reels/ Concern | Josh | Bass Fishing | 7 | September 24th, 2003 04:26 PM |
Smallmouth Jig/Tube Spinning Rod/Reel | Rich Pierro | Bass Fishing | 0 | September 24th, 2003 02:47 PM |