![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
The reason you are seeing an increase in casting distance as the line gets
wetter is a decrease in line resistance thru the guides. This will apply to mono as well as super lines. Also the better that the guides are will help in reducing said resistance. JMHO! -- Dave Norton Millennium Rods "CR" wrote in message om... "Charles B. Summers" (Comcast) wrote in message ... The longer rod will help, but switch to mono. The weight of the PP when wet will surely affect your distance. I swear it seems that my distance actually goes up significantly after a few casts. Maybe the wet line goes through the reel easier. Or maybe its my imagination. I wonder what is considered to be a good distance for 1/16th of an ounce? Maybe I'm already getting about the max. |
#2
|
|||
|
|||
![]()
I used to spend three months every year casting 1/16 oz and 1/32 oz jigs for
White Bass. With the right set up you can make fairly long casts. My favorite rod is a 71/2 foot Cabela's spinning rod, either Light or Medium Light action. I can't cast well with a rod that's too limber. Most so called Ultra Light rods don't have enough backbone to give you the necessary "snap" to really shoot a light lure out there. I've used 8- and 9-foot rods and they can cast very well, but my arm and wrist get tired way too soon to suit me. Which line? I like 4 lb. clear mono or 8 lb PowerPro. I agree that a larger diameter reel works better than the tiniest of ultra lights, but also believe that there is a point beyond which a large diameter is counter-productive. I haven't actually measured the old Mitchell 300 spool, but I think it's about the right diameter. It's true that filling a spool to its ultimate capacity can add a little distance to your cast. The first cast, that is. Maybe even the second and third. But sooner or later, the line will come off in a pile of uncontrollable loops and the resulting tangle will make you wish you'd payed attention to the owner's manual and stopped the line when it got about 1/16 of an inch from the lip. Also -- you might take a look at which lure you're using. A small plastic grub on a jig will give you more casting distance than the same jig head tied with feathers or bucktail -- especially if the jig is overdressed. The grub is less wind resistant and it also has some weight of its own which helps load your rod and carry the cast. Family, Friends, Fishing, Rob Storm http://stormsrestaurants.com |
#3
|
|||
|
|||
![]()
Rob wrote:
I used to spend three months every year casting 1/16 oz and 1/32 oz jigs for White Bass. I use a lot of little stuff for LM and SM bass, as well as crappies. It's one of my favorite ways to fish. Most so called Ultra Light rods don't have enough backbone to give you the necessary "snap" to really shoot a light lure out there. Steve Huber recently built me a 7 footer for this application that is just phenomenal. I find myself using it for drop shotting as well as for the little jigs it was intended for. Which line? I like 4 lb. clear mono or 8 lb PowerPro. Mono. the stretch actually helps in landing fish on light line. most any nn-fluorescent mono will do for me, but the Yozuri hybrid is my favortie. I agree that a larger diameter reel works better than the tiniest of ultra lights, I typically use a spinning reel on size larger than normal. Also -- you might take a look at which lure you're using. A small plastic grub on a jig will give you more casting distance than the same jig head tied with feathers or bucktail Once the feather/hair get saturated, the casting distance will be comparable. Even greater for marabou. RichZ© www.richz.com/fishing |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for long casting tips | John Morphet | General Discussion | 4 | May 23rd, 2004 03:34 PM |
Fly Casting Classes - 2004 Schedule | Dennis G. | General Discussion | 0 | November 10th, 2003 05:48 PM |
casting | Gone Angling | Bass Fishing | 0 | September 21st, 2003 07:54 PM |