Trolling plate on small motor

And waste a lot of fuel !

Dave



"licker" wrote in message ...
| Buy or build a drift anchor. One can be made by drilling holes in a 5
| gallon plastic bucket and run the rope through the bucket. Tie the rope to
| a bridle and attach to the back of the boat while trolling. The drag of the
| bucket will slow him down.
|
| Sarge
|
|

"David H. Lipman" wrote in message
...
And waste a lot of fuel !

How will that waste any more fuel than putting a trolling plate on the outboard? If the motor is
spinning at 500 rpm's and going 3 mph, it's not going to use any more fuel if it's still running at
500 rpms, dragging a bucket and traveling at 1.5 mph.

The only other thing that he might consider is running the motor in reverse and backtrolling. Many
times, a boat will move slower through the water backwards than forward, plus offer the added
advantage of more precise boat control.
--
Steve
OutdoorFrontiers
http://www.outdoorfrontiers.com
G & S Guide Service and Custom Rods
http://www.herefishyfishy.com