A Fishing forum. FishingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishingBanter forum » rec.outdoors.fishing newsgroups » Bass Fishing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Giving up on Daiwa spincasters..



 
 
Thread Tools Display Modes
  #1  
Old July 14th, 2004, 03:44 AM
ROBMURR
external usenet poster
 
Posts: n/a
Default Giving up on Daiwa spincasters..

I have much more serious spinning gear
for larger fish, dont worry. This is for use
around docks, overhanging trees, etc
where I need control. Mostly for panfish
but bass are welcome too.
Also for use by less experience folks
who might want to wet a hook.
Just looked at the broken drag on my Johnson crappie pro and a metal piece
was bent wrong, bent it back and it
works great now.

  #2  
Old July 14th, 2004, 05:42 PM
Bob La Londe
external usenet poster
 
Posts: n/a
Default Giving up on Daiwa spincasters..

I hate to say it, but the only thing that works with less experienced
anglers is patience, education, and practice. I personally think a spinning
reel gives me better control in those circumstances, but there are many here
that feel a baitcaster give more control than anything. I doubt I would
consider a spincast reel for control. It is probably the easiest to learn
to use for open water casting, but for tight quarters it would not be my
first choice.

All of that being said, I have fished a couple times with Dave Greaves who
fishes spincasters for almost everything. He is an excellent angler and has
finished well in all of the local club and semi /pro tournaments he has
fished. I have seen him throw heavy buzz baits with no problem. He flips
heavy cover with 20lb Steren big game on a spincaster as well. Its pretty
amazing.

There are guys who are amazed at how well I can toss a bait underneath heavy
overhangs with a side armed cast on a spinning rod. If I try to pitch I can
do that too, but since I learned to pitch with a baitcaster I seem to do
that better with a 7'+ flippin stick. Weird huh?

--
** FREE Fishing Lures
** Weekly drawing
** Public Fishing and Boating Forums
** www.YumaBassMan.com


"ROBMURR" wrote in message
...
I have much more serious spinning gear
for larger fish, dont worry. This is for use
around docks, overhanging trees, etc
where I need control. Mostly for panfish
but bass are welcome too.
Also for use by less experience folks
who might want to wet a hook.
Just looked at the broken drag on my Johnson crappie pro and a metal piece
was bent wrong, bent it back and it
works great now.



  #3  
Old July 14th, 2004, 10:59 PM
Bob Rickard
external usenet poster
 
Posts: n/a
Default Giving up on Daiwa spincasters..

I pitch with a spinning rig, and could care less about conforming to style
or anything else.

--
Bob Rickard
(AKA Dr. Spinnerbait)
www.secretweaponlures.com
--------------------------=x O')))

"Bob La Londe" wrote in message
...
I hate to say it, but the only thing that works with less experienced
anglers is patience, education, and practice. I personally think a

spinning
reel gives me better control in those circumstances, but there are many

here
that feel a baitcaster give more control than anything. I doubt I would
consider a spincast reel for control. It is probably the easiest to learn
to use for open water casting, but for tight quarters it would not be my
first choice.

All of that being said, I have fished a couple times with Dave Greaves who
fishes spincasters for almost everything. He is an excellent angler and

has
finished well in all of the local club and semi /pro tournaments he has
fished. I have seen him throw heavy buzz baits with no problem. He flips
heavy cover with 20lb Steren big game on a spincaster as well. Its pretty
amazing.

There are guys who are amazed at how well I can toss a bait underneath

heavy
overhangs with a side armed cast on a spinning rod. If I try to pitch I

can
do that too, but since I learned to pitch with a baitcaster I seem to do
that better with a 7'+ flippin stick. Weird huh?

--
** FREE Fishing Lures
** Weekly drawing
** Public Fishing and Boating Forums
** www.YumaBassMan.com


"ROBMURR" wrote in message
...
I have much more serious spinning gear
for larger fish, dont worry. This is for use
around docks, overhanging trees, etc
where I need control. Mostly for panfish
but bass are welcome too.
Also for use by less experience folks
who might want to wet a hook.
Just looked at the broken drag on my Johnson crappie pro and a metal

piece
was bent wrong, bent it back and it
works great now.





  #4  
Old July 14th, 2004, 10:59 PM
Bob Rickard
external usenet poster
 
Posts: n/a
Default Giving up on Daiwa spincasters..

I pitch with a spinning rig, and could care less about conforming to style
or anything else.

--
Bob Rickard
(AKA Dr. Spinnerbait)
www.secretweaponlures.com
--------------------------=x O')))

"Bob La Londe" wrote in message
...
I hate to say it, but the only thing that works with less experienced
anglers is patience, education, and practice. I personally think a

spinning
reel gives me better control in those circumstances, but there are many

here
that feel a baitcaster give more control than anything. I doubt I would
consider a spincast reel for control. It is probably the easiest to learn
to use for open water casting, but for tight quarters it would not be my
first choice.

All of that being said, I have fished a couple times with Dave Greaves who
fishes spincasters for almost everything. He is an excellent angler and

has
finished well in all of the local club and semi /pro tournaments he has
fished. I have seen him throw heavy buzz baits with no problem. He flips
heavy cover with 20lb Steren big game on a spincaster as well. Its pretty
amazing.

There are guys who are amazed at how well I can toss a bait underneath

heavy
overhangs with a side armed cast on a spinning rod. If I try to pitch I

can
do that too, but since I learned to pitch with a baitcaster I seem to do
that better with a 7'+ flippin stick. Weird huh?

--
** FREE Fishing Lures
** Weekly drawing
** Public Fishing and Boating Forums
** www.YumaBassMan.com


"ROBMURR" wrote in message
...
I have much more serious spinning gear
for larger fish, dont worry. This is for use
around docks, overhanging trees, etc
where I need control. Mostly for panfish
but bass are welcome too.
Also for use by less experience folks
who might want to wet a hook.
Just looked at the broken drag on my Johnson crappie pro and a metal

piece
was bent wrong, bent it back and it
works great now.





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
daiwa reel Lure builder Bass Fishing 0 March 26th, 2004 12:20 PM
Daiwa Millionaire - Japanese version hermit Bass Fishing 0 February 3rd, 2004 09:04 AM
Daiwa Millionaire hermit Bass Fishing 1 December 13th, 2003 04:11 AM
Should Stren Super Braid work with Daiwa Goldcast spincaster? QUAKEnSHAKE Bass Fishing 8 November 19th, 2003 09:59 AM
wanted daiwa sl30sh Steveo UK Sea Fishing 0 October 2nd, 2003 12:30 PM


All times are GMT +1. The time now is 06:08 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishingBanter.
The comments are property of their posters.