Wading boot selection problem

al wrote:
I would not recommend Simms boots. I have the light pair and after two
seasons have worn the boots out. Not the soles, but rather the "pleather"
reiforncements on the sides of the boots. I do not but would like to own a
pair of Chotas. The Orivs convertable boots look (and feel) solid and
changing soles for walking seems easy.

I've never had the slightest problem with Simms boots, and I abuse the
hell out of my boots. I have two pair. One is a pair of leather Guide
boots with felt soles and carbide studs. They are extremely heavy duty
and weigh too much for most of my fishing, which involves lots of
hiking. The other pair is a lightweight boot with felt soles and
removable studs, which are actually sheet metal screws. The removable
studs aren't nearly as good as carbide studs, but the advantage is that
they can be removed if, for example, I want to wear them in a nice drift
boat like John Hightower's.

The problem with felt soles is that they don't wear well. My next pair
will be lightweight Simms boots with Aquastealth soles and carbide
studs. I'll use my current lightweight boots, with the studs removed,
for that purpose in the future.

--
Cut "to the chase" for my email address.

On Sun, 21 Nov 2004 01:29:00 GMT, rw
wrote:

al wrote:
I would not recommend Simms boots. I have the light pair and after two
seasons have worn the boots out. Not the soles, but rather the "pleather"
reiforncements on the sides of the boots. I do not but would like to own a
pair of Chotas. The Orivs convertable boots look (and feel) solid and
changing soles for walking seems easy.

I've never had the slightest problem with Simms boots, and I abuse the
hell out of my boots. I have two pair. One is a pair of leather Guide
boots with felt soles and carbide studs. They are extremely heavy duty
and weigh too much for most of my fishing, which involves lots of
hiking. The other pair is a lightweight boot with felt soles and
removable studs, which are actually sheet metal screws. The removable
studs aren't nearly as good as carbide studs, but the advantage is that
they can be removed if, for example, I want to wear them in a nice drift
boat like John Hightower's.

The problem with felt soles is that they don't wear well. My next pair
will be lightweight Simms boots with Aquastealth soles and carbide
studs. I'll use my current lightweight boots, with the studs removed,
for that purpose in the future.


The soles on my first pair of studded Weinbrenners lasted 9 years.
The uppers gave out before the soles. I'd average 40 to 50 trips a
year, and yes, I did hike in them.

Peter

turn mailhot into hotmail to reply

Visit The Streamer Page at http://www.mountaincable.net/~pcharl...ers/index.html

rw My next pair will be lightweight Simms boots with Aquastealth
rw soles and carbide studs.

This is an option for me too, assuming that Simms marketing hype
"quick-drying" is actually true. Although the convertible cleat system
would be unnecessary in my case (assuming that AquaStealth provides
enough fraction on its own).

--
Jarmo Hurri

Commercial email countermeasures included in header email
address. Remove all garbage from header email address when replying,
or just use .

rw My next pair will be lightweight Simms boots with Aquastealth
rw soles and carbide studs.

This is an option for me too, assuming that Simms marketing hype
"quick-drying" is actually true. Although the convertible cleat system
would be unnecessary in my case (assuming that AquaStealth provides
enough fraction on its own).

--
Jarmo Hurri

Commercial email countermeasures included in header email
address. Remove all garbage from header email address when replying,
or just use .