![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hello All,
I know nothing about fly fishing but my brother-in-law is coming out here to fish and I thought I would try to learn something before he gets here. So I signed up for a course and I just took my first fly fishing class last night (first of 5 in the course). And I had a question that only occurred to me after I left. In the course they talked about rods, reels, line, and waders. When talking about the waders they told some horror stories about people fishing in cold water in the wrong gear and getting hypothermia and the like. On the way home I got to wondering why you wouldn't just fish from the shore if the water was really cold. So my question is: is it possible to fly fish from the shore/bank or do you have to be in the water to fly-fish. They did mention being in the boat but most of discussion seem to center around standing in the water and how there are a number of dangers - like hypothermia or falling over and getting water in the waders and the like. TIA Bob |
#2
|
|||
|
|||
![]() Well, don't know about falling over or hypothermia, but I do know that most of the places I fish have trees and bushes along the shore. You need to get out into the water to be able to cast. -- Frank Reid Euthanize to respond |
#3
|
|||
|
|||
![]() "Frank Reid" wrote in message ... Well, don't know about falling over or hypothermia, but I do know that most of the places I fish have trees and bushes along the shore. You need to get out into the water to be able to cast. -- Frank Reid Euthanize to respond Although I prefer wadding, it is possible to fly-fish from the bank, the most common cast believe it or not is not up in the air, but it's the rollcast. Beautiful cast when done right. 40-60ft rollcast are not uncommon, and like other casting strokes, it takes a lot of practice. -tom |
#4
|
|||
|
|||
![]()
Tom Nakashima wrote:
Although I prefer wadding, it is possible to fly-fish from the bank, the most common cast believe it or not is not up in the air, but it's the rollcast. Beautiful cast when done right. 40-60ft rollcast are not uncommon, and like other casting strokes, it takes a lot of practice. A DT line helps. -- Cut "to the chase" for my email address. |
#5
|
|||
|
|||
![]()
I must be roll casting wrongly as 30ft would be my limit with the 5wt..
although I usually find that is enough distance anyway as the trout seem to prefer to be in a channel near the bank rather than in midstream |
#6
|
|||
|
|||
![]() "detoor" schrieb im Newsbeitrag ... I must be roll casting wrongly as 30ft would be my limit with the 5wt.. although I usually find that is enough distance anyway as the trout seem to prefer to be in a channel near the bank rather than in midstream Go here and watch this; http://www.bartdezwaan.nl/rollcast/rollcasting.htm TL MC |
#7
|
|||
|
|||
![]()
Mike Connor wrote:
"detoor" schrieb im Newsbeitrag ... I must be roll casting wrongly as 30ft would be my limit with the 5wt.. although I usually find that is enough distance anyway as the trout seem to prefer to be in a channel near the bank rather than in midstream Go here and watch this; http://www.bartdezwaan.nl/rollcast/rollcasting.htm Excellent video, Mike, thanks. The slow motion version is especially helpful. Position of the hands over the head at the beginning of the cast, and a brisk (and relatively long!) haul, seem to be important. That said, I wonder if folks don't often confuse "a 40ft roll cast" with "roll casting 40ft of line". I could be wrong, but looking at that video repeatedly and trying to pinpoint the end of the line, it doesn't seem to me that he has 16m (52ft, or more than 5 rod lengths) of line out past the rod tip..... Take into account a rod length of 9ft and leader/tippet length of 9-10 feet, and a real-life 40ft roll cast isn't out of reach of most folks, I think...... |
#8
|
|||
|
|||
![]() "Mike Connor" wrote in message ... "detoor" schrieb im Newsbeitrag ... I must be roll casting wrongly as 30ft would be my limit with the 5wt.. although I usually find that is enough distance anyway as the trout seem to prefer to be in a channel near the bank rather than in midstream Go here and watch this; http://www.bartdezwaan.nl/rollcast/rollcasting.htm TL MC Good video Mike, on the rollcast. Also note that the caster added in a front haul. Start with a short distance, 30 ft is fine until you get the technique down. Also anchor the line to start. Once you feel comfortable, you can add the front haul and go for greater distance. -tom |
#9
|
|||
|
|||
![]() "detoor" wrote in message ... I must be roll casting wrongly as 30ft would be my limit with the 5wt.. although I usually find that is enough distance anyway as the trout seem to prefer to be in a channel near the bank rather than in midstream There are a lot of factors that come into play in making a long roll cast. Skill is important, of course, but so are tools......and how you measure. If you've got an 8-1/2 foot rod and a 2-1/2 foot arm, that's ten feet right there. Add ten feet of leader, and you only need to have 20 feet of line out to make a 40 foot cast. Obviously, if you're tall....and you lean forward.....and you've got long arms.....and you've got a long rod.....and you practice....... ![]() Wolfgang |
#10
|
|||
|
|||
![]()
On 11/4/05 10:22 AM, in article , "Frank
Reid" wrote: Well, don't know about falling over SPLORK! :-) Bill |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fly Fishing the High Surf | [email protected] | Fly Fishing | 1 | October 25th, 2005 07:16 PM |
New to Fishing? | [email protected] | Fly Fishing | 0 | December 2nd, 2004 11:24 AM |
Fly Fishing Compendium | Larry Weeks | Fly Fishing | 0 | August 15th, 2004 04:56 PM |
Colorado Fly Fishing | Robert Brinson | Fly Fishing | 6 | November 24th, 2003 05:39 PM |
Fly fishing brother passes | Bill Kiene | Fly Fishing | 1 | October 23rd, 2003 04:26 PM |