![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() "Diamond Dave" wrote in message ... Why is it that most/all pro and semi-pro bass fishermen use bait casting reels when in tournaments, or filming their TV shows. Is there some advantage to the way a bait casting reel casts or retrieves. tnx. I think it's all in what you're most comfortable with Dave. I tend to use a baitcaster for everything I can that is heavy enough for me to accurately cast it with, and will turn to a spinning rig when it is something I need to cast some distance and is too light to worry with using a baitcaster with, say like a wacky rigged worm, or ultra light finesse-type rig, like a drop shot (we have so much pressure here, we have to down-size almost to pan fish sized lures sometimes to get bit). I will also use a spinning rig with lures/rigs that are longer or bulkier than normal, if that sounds right. I am referring to a Carolina-rig specifically. With a smallish weight, and then 18"-24" of leader, followed by a nearly weightless soft plastic, they can be a chore to work accurately with a baitcaster for me. So I use them on spinning reels, pretty much exclusively. They're just easier to cast with spinning gear to me. The lone exception to this is if I find a spot that calls for a c-rig lure with a flipped or pitched presentation (brushy shorelines/laydowns). But if the bait I am presenting is say Ľoz or more (and isn't dangly, like a C-Rig), I usually go with a baitcaster. I can cast it farther with more accuracy - due to 20+ years of practice, excellent reels and years of tinkering with those reels to "tune" them to my style and ability. As a result, when I go to the lake "fully loaded", that means 4 baitcasters and 2 spinning rigs. (No, I am not a tourney fisherman, as the low rod count likely, accurately implies.) And 1 of those spinning rigs is usually setup for crappie right out of the box (small reel, light rod, light line), for those ultra slow days when the bass are lock jawwed. The key, IMHO, is confidence. I suggest you use whatever you feel most confident with. You won't catch many fish fishing with gear you have no confidence in, in my experience anyway. And the fish don't know what kind of gear you're using, so it's all up to you. |
#2
|
|||
|
|||
![]() "SimRacer" wrote in message om... "Diamond Dave" wrote in message ... Why is it that most/all pro and semi-pro bass fishermen use bait casting reels when in tournaments, or filming their TV shows. Is there some advantage to the way a bait casting reel casts or retrieves. tnx. I think it's all in what you're most comfortable with Dave. I tend to use a baitcaster for everything I can that is heavy enough for me to accurately cast it with, and will turn to a spinning rig when it is something I need to cast some distance and is too light to worry with using a baitcaster with, say like a wacky rigged worm, or ultra light finesse-type rig, like a drop shot (we have so much pressure here, we have to down-size almost to pan fish sized lures sometimes to get bit). I will also use a spinning rig with lures/rigs that are longer or bulkier than normal, if that sounds right. I am referring to a Carolina-rig specifically. With a smallish weight, and then 18"-24" of leader, followed by a nearly weightless soft plastic, they can be a chore to work accurately with a baitcaster for me. So I use them on spinning reels, pretty much exclusively. They're just easier to cast with spinning gear to me. Around here we call those light weight c-rigs "splitshot rigs" and most of the guys I know use spinning tackle for them. -- Bob La Londe - Webmaster www.YumaBassMan.com Tornament Director www.YumaProAm.com *** Free account sponsored by SecureIX.com *** *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com *** |
#3
|
|||
|
|||
![]() "Bob La Londe" wrote in message om... "SimRacer" wrote in message om... "Diamond Dave" wrote in message ... Why is it that most/all pro and semi-pro bass fishermen use bait casting reels when in tournaments, or filming their TV shows. Is there some advantage to the way a bait casting reel casts or retrieves. tnx. I think it's all in what you're most comfortable with Dave. I tend to use a baitcaster for everything I can that is heavy enough for me to accurately cast it with, and will turn to a spinning rig when it is something I need to cast some distance and is too light to worry with using a baitcaster with, say like a wacky rigged worm, or ultra light finesse-type rig, like a drop shot (we have so much pressure here, we have to down-size almost to pan fish sized lures sometimes to get bit). I will also use a spinning rig with lures/rigs that are longer or bulkier than normal, if that sounds right. I am referring to a Carolina-rig specifically. With a smallish weight, and then 18"-24" of leader, followed by a nearly weightless soft plastic, they can be a chore to work accurately with a baitcaster for me. So I use them on spinning reels, pretty much exclusively. They're just easier to cast with spinning gear to me. Around here we call those light weight c-rigs "splitshot rigs" and most of the guys I know use spinning tackle for them. Exactly my point. A lot of personal preference, based on the lure and presentation, drives what type of gear various people use. I just use baitcasting gear for everything I can effectively use it with. If I can't make it work on a baitcaster - for whatever reason: size, weight, etc - I have spinning gear available to put it on. I am just more comfortable and more accurate with a baitcaster. I even prefer them when I fish inshore and offshore species down at the coast where I cast for fish - redfish, speckled trout, striped bass, etc. They're a little heavier, and salt-water specific models, but they're just bigger brothers to the ones I use back home here for the freshwater fins I chase. -- Bob La Londe - Webmaster www.YumaBassMan.com Tornament Director www.YumaProAm.com *** Free account sponsored by SecureIX.com *** *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com *** |
#4
|
|||
|
|||
![]() "SimRacer" wrote in message ... "Bob La Londe" wrote in message om... "SimRacer" wrote in message om... "Diamond Dave" wrote in message ... Why is it that most/all pro and semi-pro bass fishermen use bait casting reels when in tournaments, or filming their TV shows. Is there some advantage to the way a bait casting reel casts or retrieves. tnx. I think it's all in what you're most comfortable with Dave. I tend to use a baitcaster for everything I can that is heavy enough for me to accurately cast it with, and will turn to a spinning rig when it is something I need to cast some distance and is too light to worry with using a baitcaster with, say like a wacky rigged worm, or ultra light finesse-type rig, like a drop shot (we have so much pressure here, we have to down-size almost to pan fish sized lures sometimes to get bit). I will also use a spinning rig with lures/rigs that are longer or bulkier than normal, if that sounds right. I am referring to a Carolina-rig specifically. With a smallish weight, and then 18"-24" of leader, followed by a nearly weightless soft plastic, they can be a chore to work accurately with a baitcaster for me. So I use them on spinning reels, pretty much exclusively. They're just easier to cast with spinning gear to me. Around here we call those light weight c-rigs "splitshot rigs" and most of the guys I know use spinning tackle for them. Exactly my point. A lot of personal preference, based on the lure and presentation, drives what type of gear various people use. I just use baitcasting gear for everything I can effectively use it with. If I can't make it work on a baitcaster - for whatever reason: size, weight, etc - I have spinning gear available to put it on. I am just more comfortable and more accurate with a baitcaster. I even prefer them when I fish inshore and offshore species down at the coast where I cast for fish - redfish, speckled trout, striped bass, etc. They're a little heavier, and salt-water specific models, but they're just bigger brothers to the ones I use back home here for the freshwater fins I chase. -- Bob La Londe - Webmaster www.YumaBassMan.com Tornament Director www.YumaProAm.com *** Free account sponsored by SecureIX.com *** *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com *** Lightweight presentation, spinner, all others casting reels. I use spinners 90% of the time for dropshot. Unless in deeper water with weeds then a heavier weight and caster. I also ocean fish and with small pin-head anchovies I fish with a large spinning reel, as can flip the bait out furthur from the boat. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
I have a stupid question. | Bob La Londe | Bass Fishing | 1 | April 10th, 2006 09:02 PM |
I have a stupid question. | Steve @ OutdoorFrontiers | Bass Fishing | 0 | April 10th, 2006 09:02 PM |
stupid wader question | oldgoat | Fly Fishing Tying | 4 | January 11th, 2005 03:09 AM |
Stupid Americans! -- Stupid... Stupid... STUPID!!! __________-+__ putnybol | Pepperoni | Bass Fishing | 0 | December 27th, 2004 03:42 PM |
Stupid netiquette question | Wayne Knight | Fly Fishing | 21 | February 28th, 2004 03:12 AM |