![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
My Grandmother gave me a flyrod last weekend that she said belonged to my
Great Grandfather. There was a note attached to it, written by my G-Grandfather that said that the rod was purchased for him by his wife as a present in 1925. She paid $55 for it. it seems to me you could by a car for about $75 in 1925 It is a 3 piece rod with a cork handle and it is in nearly perfect condition. I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Thanks, Scott |
#2
|
|||
|
|||
![]()
You sure it isn't a "Joe Frost"?
-- Clark Reid http://www.dryflynz.com Umpqua Designer Flytier "Scott" wrote in message ... My Grandmother gave me a flyrod last weekend that she said belonged to my Great Grandfather. There was a note attached to it, written by my G-Grandfather that said that the rod was purchased for him by his wife as a present in 1925. She paid $55 for it. it seems to me you could by a car for about $75 in 1925 It is a 3 piece rod with a cork handle and it is in nearly perfect condition. I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Thanks, Scott |
#3
|
|||
|
|||
![]() "Scott" wrote in message ... My Grandmother gave me a flyrod last weekend that she said belonged to my Great Grandfather. There was a note attached to it, written by my G-Grandfather that said that the rod was purchased for him by his wife as a present in 1925. She paid $55 for it. it seems to me you could by a car for about $75 in 1925 It is a 3 piece rod with a cork handle and it is in nearly perfect condition. I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Any chance that this is a 9ft, 3 inch 9wt rod, 2 piece hex? And that your GGrandfather was a Kiwi? --riverman |
#4
|
|||
|
|||
![]() "riverman" wrote in message ... I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Any chance that this is a 9ft, 3 inch 9wt rod, 2 piece hex? And that your GGrandfather was a Kiwi? D'oH. You said it was a 3-piece. FWIW, if it's a "Joe Frost" rather than Jack Frost, then it could have been made by the Walker Bampton Co. in Alnwick, Northumberland, England. WB was formed by ex-Hardy employees, who made rods from the early 30s until 1986, when they were bought out by Farlows of Pall Mall St, London. They were quite high-quality for their day, and were targeted for the New Zealand market. If yours was bought in 1925, it might not be one of these, or it might be a prototype before the company got started. Or it might have beed designed by Joe Frost himself; Joe Frost was a Kiwi fly fisherman (arrived in Turangi, NZ in 1915) who designed the "Tonga" flyrods for Tisdalls in 1938. Look over the rod more closely and see if there are any more clues. It might be worth something as an antique. --riverman |
#5
|
|||
|
|||
![]()
riverman wrote:
"riverman" wrote in message ... I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Any chance that this is a 9ft, 3 inch 9wt rod, 2 piece hex? And that your GGrandfather was a Kiwi? D'oH. You said it was a 3-piece. FWIW, if it's a "Joe Frost" rather than Jack Frost, then it could have been made by the Walker Bampton Co. in Alnwick, Northumberland, England. WB was formed by ex-Hardy employees, who made rods from the early 30s until 1986, when they were bought out by Farlows of Pall Mall St, London. They were quite high-quality for their day, and were targeted for the New Zealand market. If yours was bought in 1925, it might not be one of these, or it might be a prototype before the company got started. Or it might have beed designed by Joe Frost himself; Joe Frost was a Kiwi fly fisherman (arrived in Turangi, NZ in 1915) who designed the "Tonga" flyrods for Tisdalls in 1938. Look over the rod more closely and see if there are any more clues. It might be worth something as an antique. --riverman Could this be them? http://www.jfonline.co.uk/why.html -- Don`t Worry, Be Happy Sandy -- E-Mail:- Website:- http://www.ftscotland.co.uk IRC:- Sandyb in #rabble uk3.arcnet.vapor.com Port:6667 #Rabble Channel Website:- http://www.ftscotland.co.uk/rabbled ICQ : 41266150 |
#6
|
|||
|
|||
![]() "Sandy" wrote in message ... riverman wrote: "riverman" wrote in message ... I haven't been able to find any information on Jack Frost rods other than that there was a company in lower England that was incepted in the late 1800's that made fishing rods. I am curious to where I can find out if the pole is worth anything and what the history of the pole is. Any info. would be much appreciated! Any chance that this is a 9ft, 3 inch 9wt rod, 2 piece hex? And that your GGrandfather was a Kiwi? D'oH. You said it was a 3-piece. FWIW, if it's a "Joe Frost" rather than Jack Frost, then it could have been made by the Walker Bampton Co. in Alnwick, Northumberland, England. WB was formed by ex-Hardy employees, who made rods from the early 30s until 1986, when they were bought out by Farlows of Pall Mall St, London. They were quite high-quality for their day, and were targeted for the New Zealand market. If yours was bought in 1925, it might not be one of these, or it might be a prototype before the company got started. Or it might have beed designed by Joe Frost himself; Joe Frost was a Kiwi fly fisherman (arrived in Turangi, NZ in 1915) who designed the "Tonga" flyrods for Tisdalls in 1938. Look over the rod more closely and see if there are any more clues. It might be worth something as an antique. --riverman Could this be them? http://www.jfonline.co.uk/why.html -- I saw that, too, but Jack Frost bought the company and gave his name to it in 1985. He'd have been hard pressed to have been making rods in the 1920s... --riverman |
#7
|
|||
|
|||
![]()
riverman wrote:
"Sandy" wrote in message ... riverman wrote: "riverman" wrote in message ... Could this be them? http://www.jfonline.co.uk/why.html -- I saw that, too, but Jack Frost bought the company and gave his name to it in 1985. He'd have been hard pressed to have been making rods in the 1920s... --riverman I didn't read that till after I sent the post ![]() -- Don`t Worry, Be Happy Sandy -- E-Mail:- Website:- http://www.ftscotland.co.uk IRC:- Sandyb in #rabble uk3.arcnet.vapor.com Port:6667 #Rabble Channel Website:- http://www.ftscotland.co.uk/rabbled ICQ : 41266150 |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rod to buy | Skeeter | Fly Fishing | 25 | December 17th, 2003 06:24 AM |
Fly Fishing History (small business) 1B | Bill Kiene | Fly Fishing | 3 | November 13th, 2003 04:42 AM |
old fenwick rod | Dan | Fly Fishing | 18 | October 24th, 2003 02:03 PM |
Fly fishing brother passes | Bill Kiene | Fly Fishing | 1 | October 23rd, 2003 04:26 PM |
Fly Fishing Rochester NY | Greg LaPorta | Fly Fishing | 4 | October 20th, 2003 09:30 PM |