A Fishing forum. FishingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » FishingBanter forum » rec.outdoors.fishing newsgroups » Fly Fishing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Do Not Try This at Home!



 
 
Thread Tools Display Modes
  #1  
Old January 12th, 2006, 05:54 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He thought he
give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg
-tom


  #2  
Old January 12th, 2006, 06:21 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

Tom Nakashima wrote:
At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He thought he
give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg


Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.

--
Ken Fortenberry
  #3  
Old January 12th, 2006, 08:03 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!


"Ken Fortenberry" wrote in message
m...
Tom Nakashima wrote:
At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He thought
he give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg


Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.

--
Ken Fortenberry


I'm not sure Ken, do spinning rods come with rod tubes?
I would imagine anytime you fly a helicopter in the house you're beggin for
trouble, but Kris is always getting into mischief.
-tom


  #4  
Old January 12th, 2006, 08:20 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!


"Tom Nakashima" wrote in message
...

"Ken Fortenberry" wrote in message
m...
Tom Nakashima wrote:
At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He thought
he give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg


Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.

--
Ken Fortenberry


I'm not sure Ken, do spinning rods come with rod tubes?
I would imagine anytime you fly a helicopter in the house you're beggin
for trouble,


I believe that logic extends to running ANY internal combustion engine in
the house.

but Kris is always getting into mischief.


Well, he gets points for imagination, anyway.

Wolfgang
um......you might want to let him know that jet propulsion and rocketry are
generally seen as outdoor activities as well.


  #5  
Old January 12th, 2006, 08:54 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!


"Wolfgang" wrote in message
...

"Tom Nakashima" wrote in message
...

"Ken Fortenberry" wrote in message
m...
Tom Nakashima wrote:
At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He
thought he give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg

Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.

--
Ken Fortenberry


I'm not sure Ken, do spinning rods come with rod tubes?
I would imagine anytime you fly a helicopter in the house you're beggin
for trouble,


I believe that logic extends to running ANY internal combustion engine in
the house.


Lucky for Kris his new toy is electric, or else he would have made
pixi-sticks out of those rods, when he passed out from the exhaust fumes.


but Kris is always getting into mischief.


Well, he gets points for imagination, anyway.


Yup, over his lifetime, he's scored enough points to make Walt Disney look
like a mini mouse.
I'm surprised he's still alive with all the trouble he's got into.


Wolfgang
um......you might want to let him know that jet propulsion and rocketry
are generally seen as outdoor activities as well.


I'm sure the thought crossed his mind, getting high on jet propulsion
fumes...think it was Astronaut Alan B Shepard who first said that in '61
aboard Freedom 7.
-tom


  #6  
Old January 12th, 2006, 09:12 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

Tom Nakashima wrote:
"Ken Fortenberry" wrote:
Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.


I'm not sure Ken, do spinning rods come with rod tubes?


My spinning rods didn't come with rod tubes but I bought
tubes for them, both for home storage and canoe tripping.
Orvis used to sell plastic half tubes, flat on one side,
that don't roll around in the canoe, wish I could still
find those somewhere.

--
Ken Fortenberry
  #7  
Old January 12th, 2006, 09:40 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

Ken Fortenberry wrote:
Tom Nakashima wrote:
Orvis used to sell plastic half tubes, flat on one side,
that don't roll around in the canoe, wish I could still
find those somewhere.


I know the tubes you mean and I agree. Those tubes would be much better
(more compact, lighter weight and stronger) than the other options
available for backpacking. I gave away my ultralight Orvis spinning
rod, which I don't regret, but I wish I still had the tube.
  #8  
Old January 12th, 2006, 11:04 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

On Thu, 12 Jan 2006 21:12:44 GMT, Ken Fortenberry
wrote:

Tom Nakashima wrote:
"Ken Fortenberry" wrote:
Why are all those rods sitting around outside their rod
tubes ? That's just begging for trouble, toy helicopters
or no.


I'm not sure Ken, do spinning rods come with rod tubes?


My spinning rods didn't come with rod tubes but I bought
tubes for them, both for home storage and canoe tripping.
Orvis used to sell plastic half tubes, flat on one side,
that don't roll around in the canoe, wish I could still
find those somewhere.


Those interested in such might wish to take ABS (lighter weight) or PVC
(DWV, lighter, or Sched. 40 - heavier, but sturdier) pipe and put a
fitting with an integral hex, such as shown at the link below, at both
ends:

http://www.nibco.com/cms.do?id=2&pId=60

All should be available at most plumbing suppliers, Lowe's, Home Depot,
hardware stores, etc., depending on one's location, at very reasonable
prices. In the US/Canada, one should be able to make a case of 3-4"
diameter for 5.00USD or thereabouts. If you order online, make sure you
know the part ordered is hex as not all caps, fittings, etc. are hex.
Also, if you go with the lighter-weight pipe, make sure you get the
proper fittings _and adaptors_ as Sched. 40, DWV, etc. aren't the same
size but PVC pressure fittings can be connected with inexpensive
adaptors/bushings.

Of course, it won't be as "roll proof" as a flat-side case, but it'll be
less-so than a totally round one. FWIW, a number of commercial cases
use the hex-cap/end method.

HTH,
R

  #9  
Old January 13th, 2006, 12:02 AM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

My rod tube (for my rod that didn't come with one) is a PVC tube with
end caps that press on. They fit snugly enough that its actually a bit
of a pain to get one off, which is how I like it. I use the whole thing
as as a walking stick when going through airports, and one time ago,
the overlapping part of one end cap chipped off leaving a nice flat
edge. Now, it works to keep the tube from rolling.

I was showing it to some guys back in Latvia, bragging about my
frugality, but they didn't appreciate it. One guy said 'if it doesn't
say 'Sage' on it, why bother having it?' So I'm looking for a Sage
sticker.

--riverman

  #10  
Old January 12th, 2006, 06:37 PM posted to rec.outdoors.fishing.fly
external usenet poster
 
Posts: n/a
Default Do Not Try This at Home!

On 1/12/06 12:54 PM, in article , "Tom
Nakashima" wrote:

At least that's what I told my friend.
Yes, I have some pretty crazy friends with expensive hobbies. He thought he
give RC Helicopter's a go. Crashed into his rod collection.
http://home.comcast.net/~tomnak/Bird_2.jpg


You just gave Wayne K a coronary.

:-)

B

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Home safe and sound Papa John Bass Fishing 31 May 8th, 2005 01:34 AM
Home, I think Ronnie Garrison Bass Fishing 0 May 3rd, 2005 02:30 PM
Best Home Base Work Reynard Fly Fishing 0 November 9th, 2004 10:30 PM
Looozie, I'm home! (Long) Steve @ OutdoorFrontiers Bass Fishing 4 May 2nd, 2004 09:43 PM


All times are GMT +1. The time now is 10:36 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 FishingBanter.
The comments are property of their posters.